• 한국의류학회지
• /
• 제22권3호
• /
• pp.303-311
• /
• 1998

We developed a pattern drafting computer program using a popular CAD program for the purpose of the automatic manufacturing and education based on the concept of the easy -order-system which can easily reflect body characteristics and design favors of individuals to the ready-made clothing. The programs were written in Auto LISP which can utilise most of frictions of the Auto CAD, and the result of the design for an full-pleated skirt was shown. Also, we devised an easy way to set the location of reference points by inputting of tangential angle only for the use of the cubic spline curve which can represent body shape very well. Finally, by marking down all of symbols needed in manufacturing process, we completed the automatic pattern drafting program to make it useful as an industrial pattern without any amendment or correction in cutting and sewing operation.

• 제어로봇시스템학회논문지
• /
• 제12권9호
• /
• pp.850-855
• /
• 2006

This is concerned with the development and design of automatic maneuvering system using Differential Global Positioning System(DGPS). To achievement of autonomous maneuvering controller for giant ship, first, we investigated automatic maneuvering controller using DGPS in motor car. The sensors are configured with DGPS and digital compass. We calculated velocity and steering angle of motor car based on sensor signal. To design the controller, we derived the bicycle model and developed critically damped controller. The critically damped controller can be tracing previously appointed position in the fastest time. We are used a laptop computer to realize and the control algorithm is programmed by visual basic software. The obtained experimental results from developed system show unmanned motor car is good tracing planed positions. Hence, the system is looking forward to use the autonomous maneuvering control fur giant ship.

• 수산해양기술연구
• /
• 제11권1호
• /
• pp.26-31
• /
• 1975

Mordern Ocean-going ships utilize stabilization techniques in order to minimize the effects of oscillations due to the unwanted disturbances. In this paper, as an elementary design of automatic control system with linear-state vari;tble feedback and series compensator for ship stabilization, analysis and design is limited to the linear time-invariant single input and output system. In order for the Controlled system to meet the requirements of stability, accuracy and transient response, a model of the automatic control system is proposed. For the analysis and design of this model, the state-space method, that is, the mordern way, or an alternative to the transfer function method of describing a linear system that utilize the state variables and state equations, is applied.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.71-75
• /
• 1994

This paper presents a method of optimal design of an automatic transfer system which is controlled by the electro-pneumatic servo scheme. The electro-pneumatic automatic transfer system can move parts to desired points or displace defective parts. The dynamic performance of the system can be examined by observing the behavior of the output. The output of the servo control system is the motion of the cylinder, pneumatic actuator. The dynamic performance of the cylinder is governed by the parameters of the components of the entire system. The optimal design can be accomplished by selecting of the parameters such that the desired dynamic performance of the cylinder is obtained. The optimal set of parameters might be obtained through the repeated simulations. Repeated simulations, however, is not effective to determine the optimal set of parameters since the set of parameters is large. This paper presents modeling, application of an optimization method, and the numerical results. The optimization algorithm utilizes the concept of the conjugate gradient method. The results show that the suggested optimization scheme can render faster convergence of iteration compared to other method based on an algebraic optimization method and can reduce the design efforts.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.126-131
• /
• 2007

Design for automatic coupler system of Korean Tilting Train eXpress is described. In order to carry out validation & verification activities for system design, test condition is taken into account at collision speed of 10km/h, which is required in Safety Notice for rolling stock vehicle. The study aims at safety validation between a coupler and car body including design verification for a coupler through the identifying of system design and the evaluating of test results.

• 한국생산제조학회지
• /
• 제22권3_1spc호
• /
• pp.531-536
• /
• 2013

An automatic wax-ring manufacturing system for silk coating was developed, which consisted of a container, pallet with a cooling part, injection port, and removing device. The removing device is a system to load, lift, and cut the wax-ring, which is widelyused for various silk-coating industrial purposes. A novel removing device equipped with a water cooling circulation system is proposed in this paper. It has the benefit of easy control, as well as the convenience of loading and unloading without the use of other equipment. Three-dimensional modeling techniques were adopted to develop integrated functions for the automatic wax-ring manufacturing system, which made it possible to confirm the smooth integration/interface of each part and the system's interrelations with other manufacturing systems.

• 한국CDE학회논문집
• /
• 제18권6호
• /
• pp.417-427
• /
• 2013

Assembly direction is used in order to confirm the generated assembly sequences in an automatic assembly sequence planning system. Moreover, assembly sequence planners can ascertain the feasibility of a sequence during simulation with assembly direction based in a CAD environment. In other words, assembly direction is essential for sequence optimizing and automatic generation. Based on the importance of assembly direction, this paper proposes a method to select the best direction for the generated assembly sequence using disassembly simulation and geometrical common area between assembled parts. Simultaneously, this idea can be applied to verify the generated assembly sequence. In this paper, the automatic selection of assembly direction and sequence correction system is designed and implemented. The developed algorithms and the implemented system are verified based on case study in the CAD environment.

• 한국산업융합학회 논문집
• /
• 제16권4호
• /
• pp.133-140
• /
• 2013

This paper presents an overview of the concepts of optimal feeder design in relation to the loading of bulk solids for Automatic filling system that should be control the amount of goods and packaging to seal. Feeder modular device, important parts of the package, so in order to perform a conceptual design optimization techniques are applied in two steps. First of all derive the problems through structural analysis for the conceptual model of vibrating feeder. Secondly derive reasonable design model based on the results of the structural analysis of modified boundary shape and then verify it. The proposed system has the following goal that is satisfies the dynamic stability with minimum weight and optimization of the shape. As a result, the weight reduction of feeder is 2.1% and 7% increase in the natural frequency.

• 한국유체기계학회 논문집
• /
• 제10권5호
• /
• pp.34-40
• /
• 2007

An optimization approach is investigated for the design of new nozzle system in a automatic car wash machine. Three-dimensional computational fluid dynamics and design of experiment methods have been employed to know the mutual interaction between the nozzle shape in the automatic car wash machine and the airflow velocity distribution on the vehicle surface. The performances of air nozzle system were defined as the velocity magnitude and the uniformity of the velocity on the surface of the car. Predicted jet velocity distributions for the optimized geometry were compared with experimental data and the comparisons showed generally good agreements. Also, the performance of the dryer was improved with the optimized results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.498-506
• /
• 2010

The neutral section was installed in order to prevent conflict with different phase angle source in electric railway catenary system. The speed of electric train reduced due to coasting operation by notch off when it passed the neutral section. And, the catenary wire was damaged and the accident might be happened because of the arc generation when the electric train passed the neutral section with notch on condition. This project has a goal to develop the automatic changeover system using by noncontactless semiconductor device in neutral section of catenary system so that the train pass as notch-on condition. In this first year, we obtain as following results such as domestic and international systems applications and completion requirements, development and analysis of stability for automatic changeover system, design of static switching device on automatic changeover system in neutral section and drawing up interface design and specifications according to equipment.