Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Automatic Wax-Ring Manufacturing System for Silk Coating

섬유코팅용 왁스링 성형을 위한 자동화 시스템 개발

  • Cho, Young Hak (Department of Mechanical System Design Engineering, Seoul National University of Science & Technology) ;
  • Maeng, Heeyoung (Department of Mechanical System Design Engineering, Seoul National University of Science & Technology)
  • Received : 2013.03.25
  • Accepted : 2013.05.03
  • Published : 2013.06.15
Download PDF
⟨ Previous Next ⟩

Abstract

An automatic wax-ring manufacturing system for silk coating was developed, which consisted of a container, pallet with a cooling part, injection port, and removing device. The removing device is a system to load, lift, and cut the wax-ring, which is widelyused for various silk-coating industrial purposes. A novel removing device equipped with a water cooling circulation system is proposed in this paper. It has the benefit of easy control, as well as the convenience of loading and unloading without the use of other equipment. Three-dimensional modeling techniques were adopted to develop integrated functions for the automatic wax-ring manufacturing system, which made it possible to confirm the smooth integration/interface of each part and the system's interrelations with other manufacturing systems.

Keywords

References

  1. Kim, C. K., Cho, S. H., 2002, Numerical Study on the Behavior Characteristics of a Screw in Injection Molding Machine, Journal of Korean Society of Precision Engineering, 11:5 30-37.
  2. Kim, J., Choi, J., 2009, A study on Optimal Design of Polymer Extruder Dies by CFD, Journal of KSMTE, 19:6 585-589.
  3. Beaumont, J. P., Young, J. H., Jaworski, M. J., 1999, Mold Filling Imbalances in Geometrically Balanced Runner Systems, Journal of Reinforced Plastics and Composites, 18:6 572-590. https://doi.org/10.1177/073168449901800609
  4. Rhee, B. O., Choi, J. H., Tae, J. S., 2009, Reduction of Design Variables for Automated Optimization of Injection Mold Cooling Circuit, Journal of the KSMTE 18:4 417-422.
  5. Jung, H. T., Yoon, H. G., Lim, S. H., 2008, Manufacturing Polymer/clay Nanocomposites Using a Supercritical Fluid Process, Int. Journal of Precision Engineering and Manufacturing, 9:4 63-65.
  6. Lu, K. J., Kota, S., 2006, Topology and Dimensional Synthesis of Compliant Mechanisms Using Discrete Optimization, J. Mech. Des., 128:5 1080-1091. https://doi.org/10.1115/1.2216729
  7. Im, M., Park, J. Y., Ham, S. Y., 2010, Reliability Based Topology Optimization of Compliant Mechanisms, Journal of the KSMTE, 19:6 826-833.
  8. Yoon, J. Y., Hwang, Y. K., Park, J. S., KO, T. J., Park, J. W., 2002, An Integrated CAD System for Design of Extruder Screw, Journal of Korean Society of Precision Engineering, 19:8 100-107.