• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.1
• /
• pp.21-28
• /
• 2019

As the automated vehicle system evolves, electronic devices and control software installed in vehicles are increasing. Therefore, automated vehicle electrical and electronic system (E/E system) design for ensure system integration, software modularization, system reusability, and scalability at the design stage of the automated vehicle is actively studied. This paper introduces a design methodology for automated vehicle E/E systems that employs by using cyber-physical systems (CPS). An automated forklift system was designed to examine the effectiveness of the proposed methodology. This paper showed that the proposed CPS design methodology enables an effective development of automated E/E control systems. Compare to existing design methodologies, it provides higher reusability of individual modules and an easier way to integrate control system elements such as controllers, sensors, and actuators.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.8
• /
• pp.834-841
• /
• 2006

Recently, many enterprises are installing AMSs(Automated Manufacturing Systems) for their competitive advantages. As the level of automation increases, proper design and validation of control logic is a imperative task for the successful operation of AMSs. However, current discrete event simulation methods mainly focus on the performance evaluation. As a result, they lack the modeling capabilities for the detail logic of automated manufacturing system controller. Proposed in this paper is a method of validation of the controller logic for automated material handling system using an object-oriented design and simulation. Using this method, FA engineers can validate the controller logic easily in earlier stage of system design, so they can reduce the time for correcting the logic errors and enhance the productivity of control program development Generated simulation model can also be used as a communication tool among FA engineers who have different experiences and disciplines.

• IE interfaces
• /
• v.18 no.4
• /
• pp.431-443
• /
• 2005

This paper describes a web-based system called DESIGNER for the analysis and design for automated material handling equipment(MHE) applications in manufacturing. DESIGNER models the processes for system integration, economic analysis, performance analysis, and automated storage/retrieval system(AS/RS) design. Based on the information specified by users, the various analysis modules are invoked to meet the needs of the material handling applications. The results of the analyses provide system users with useful data for material handling system design and decision on investment in automated MHE. Example problems are also presented to demonstrate the use of the system.

• Journal of the Korean Society of Systems Engineering
• /
• v.11 no.2
• /
• pp.137-146
• /
• 2015

This paper addresses the definition of the driver's functions for an automated vehicle of level 3, as defined by the Society of Automotive Engineers. By combining the constituent systems surrounding the automated vehicles in specific use cases, their interactions could be refined in a stepwise approach. This approach enables traceability of interactions between drivers, automated driving systems, and other constituent systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1029-1032
• /
• 2001

The purpose of this paper is to establish an automated die design system for compacting and sizing process required in Powder Metallurgy. Though the Powder Metallurgy(P/M) is a practical and economical forming technology, it needs long time and many trials and errors for die design. Such a problem can be solved by introduction of the automated die design system for P/M. In order to establish the system, collecting, classifying, and systematizing related knowledges from the experts in industries, books, and papers were performed. The system was constructed by AutoLISP, the language operated in AutoCAD atmosphere. This language can efficiently support for user to work on drawings. There are three modules ; P/M part specification input module, P/M part design module, and Die design module. A part for vehicle was applied to the system and satisfied results were achieved.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.357-360
• /
• 2007

In the area of domestic construction industry, recently, standardization of construction. globalization of constructional and a building information arc required to advance increase productivity, shorten the term of works and reduce the cost of construction. The objective of this is to offer basic data of process new thesis and development for automated building equipment design system based on 3D CAD building information. This study contribute the development of automated Building equipment design system based on 3D which helps to conduct the equipment design handily and quickly.

• Journal of Power System Engineering
• /
• v.12 no.6
• /
• pp.42-49
• /
• 2008

The most important job in the container terminal area is to handle the cargo effectively in the limited time. To achieve this object, many strategies have been introduced and applied to. If we consider the automated container terminal, it is necessary that the cargo handling equipments are equipped with more intelligent control systems. From the middle of the 1990's, an automated rail-mounted gantry crane(RMGC) and rubber-tired gantry crane(RTG) have been developed and widely used to handle containers in the yards. Recently, in these cranes, the many equipments like CCD cameras and sensors are mounted to cope with the automated terminal environment. In this paper, we try to support the development of more intelligent automated cranes which make the cargo handling be performed effectively in the yards. For this plant, the modelling, tracking control, anti-sway system design, skew motion suppressing and complicated motion control and suppressing problems must be considered. Especially, in this paper, the system modelling and tracking control approach are discussed. And, we design the tracking control system incorporating an observer based on the 2DOF servo system design approach to obtain the desired state informations. In the case of observer design, a weighted $H_{\infty}$ error bound approach for a state estimator is considered. Based on an algebraic Riccati equation(inequality) approach, a necessary and sufficient condition for the existence of a full-order estimator which satisfies the weighted $H_{\infty}$ error bound is introduced. Where, the condition for existence of the estimator is denoted by a Linear Matrix Inequality(LMI) which gives an optimized solution and observer gain. Based on this result, we apply it to the tracking control system design for the transfer crane.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.6
• /
• pp.799-809
• /
• 2000

This study was designed for automated pattern drawing and grading a man's Durumagi, Korean traditional coat in order to reestablished and grade the pattern by Apparel CAD SYSTEM. For the study, AM-250 systems of Gerber as the computer and Macro program as the automated drawing were used. Also, PDS(Pattern Design System) was used for the grading of the original Durumagi pattern. Results were followings; First, the size data that could be standardized by reestablishing the pattern of a man's Durumagi by each size was presented. Second, The pattern was developed by each size. Third, new design was propose for mass production with the traditional design of the DURUMAGI Fourth, The time for making DURUMAGI pattern and the cost through the automated drawings by using the Macro program were reduced. Moreover, was presented the basic data for a ready to made garment like the Western garment. Five, A man's DURUMAGI by CAD System was graded that could be applied to ready to made Hanbok

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.4
• /
• pp.76-86
• /
• 2009

Recently automated construction system is attended in construction domains because of the increase of aged workers and the shortage of the experienced. So, the proportion of automated construction in Korea is expected to be getting higher from partially automated robots to full automation systems. However, it is difficult for the automated system to operate flexibly like the human based on various work condition. In the result, the higher the level of automation in the system is, the less efficient the automated system work in the site. So, it's necessary the development component design to compensate for the flexibility shortage of the system. Therefore, this study proposes the development process to component design suitable for automated construction system using QFD technique.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.313-324
• /
• 2016

As building information modeling (BIM) is expanding its influence in various fields of architecture, engineering, construction and facility management (AEC-FM) industry, BIM-based automated code compliance checking has become possible prospects. For the automated code compliance checking, requirements in building code need to be processed into explicit representation that enables automated reasoning. This paper aims to develop high-level methods that translate verb phrases into explicit representation. The high-level methods represent conditions, properties, and related actions of the building objects and clarify the core content of the constraints. The authors analyze building permit requirements in Korea Building Code and establish a standardized process of deriving the high-level methods. As a result, 60 kinds of the high-level methods were derived. In addition, method classification, analysis, and application are introduced. This study will contribute to the representation of explicit building code sentences and establishment of the automated building permit system of Korea.