• 한국산업융합학회 논문집
• /
• 제22권1호
• /
• pp.21-28
• /
• 2019

As the automated vehicle system evolves, electronic devices and control software installed in vehicles are increasing. Therefore, automated vehicle electrical and electronic system (E/E system) design for ensure system integration, software modularization, system reusability, and scalability at the design stage of the automated vehicle is actively studied. This paper introduces a design methodology for automated vehicle E/E systems that employs by using cyber-physical systems (CPS). An automated forklift system was designed to examine the effectiveness of the proposed methodology. This paper showed that the proposed CPS design methodology enables an effective development of automated E/E control systems. Compare to existing design methodologies, it provides higher reusability of individual modules and an easier way to integrate control system elements such as controllers, sensors, and actuators.

• 제어로봇시스템학회논문지
• /
• 제12권8호
• /
• pp.834-841
• /
• 2006

Recently, many enterprises are installing AMSs(Automated Manufacturing Systems) for their competitive advantages. As the level of automation increases, proper design and validation of control logic is a imperative task for the successful operation of AMSs. However, current discrete event simulation methods mainly focus on the performance evaluation. As a result, they lack the modeling capabilities for the detail logic of automated manufacturing system controller. Proposed in this paper is a method of validation of the controller logic for automated material handling system using an object-oriented design and simulation. Using this method, FA engineers can validate the controller logic easily in earlier stage of system design, so they can reduce the time for correcting the logic errors and enhance the productivity of control program development Generated simulation model can also be used as a communication tool among FA engineers who have different experiences and disciplines.

• 산업공학
• /
• 제18권4호
• /
• pp.431-443
• /
• 2005

This paper describes a web-based system called DESIGNER for the analysis and design for automated material handling equipment(MHE) applications in manufacturing. DESIGNER models the processes for system integration, economic analysis, performance analysis, and automated storage/retrieval system(AS/RS) design. Based on the information specified by users, the various analysis modules are invoked to meet the needs of the material handling applications. The results of the analyses provide system users with useful data for material handling system design and decision on investment in automated MHE. Example problems are also presented to demonstrate the use of the system.

• 시스템엔지니어링학술지
• /
• 제11권2호
• /
• pp.137-146
• /
• 2015

This paper addresses the definition of the driver's functions for an automated vehicle of level 3, as defined by the Society of Automotive Engineers. By combining the constituent systems surrounding the automated vehicles in specific use cases, their interactions could be refined in a stepwise approach. This approach enables traceability of interactions between drivers, automated driving systems, and other constituent systems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1029-1032
• /
• 2001

The purpose of this paper is to establish an automated die design system for compacting and sizing process required in Powder Metallurgy. Though the Powder Metallurgy(P/M) is a practical and economical forming technology, it needs long time and many trials and errors for die design. Such a problem can be solved by introduction of the automated die design system for P/M. In order to establish the system, collecting, classifying, and systematizing related knowledges from the experts in industries, books, and papers were performed. The system was constructed by AutoLISP, the language operated in AutoCAD atmosphere. This language can efficiently support for user to work on drawings. There are three modules ; P/M part specification input module, P/M part design module, and Die design module. A part for vehicle was applied to the system and satisfied results were achieved.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.357-360
• /
• 2007

In the area of domestic construction industry, recently, standardization of construction. globalization of constructional and a building information arc required to advance increase productivity, shorten the term of works and reduce the cost of construction. The objective of this is to offer basic data of process new thesis and development for automated building equipment design system based on 3D CAD building information. This study contribute the development of automated Building equipment design system based on 3D which helps to conduct the equipment design handily and quickly.

• 동력기계공학회지
• /
• 제12권6호
• /
• pp.42-49
• /
• 2008

The most important job in the container terminal area is to handle the cargo effectively in the limited time. To achieve this object, many strategies have been introduced and applied to. If we consider the automated container terminal, it is necessary that the cargo handling equipments are equipped with more intelligent control systems. From the middle of the 1990's, an automated rail-mounted gantry crane(RMGC) and rubber-tired gantry crane(RTG) have been developed and widely used to handle containers in the yards. Recently, in these cranes, the many equipments like CCD cameras and sensors are mounted to cope with the automated terminal environment. In this paper, we try to support the development of more intelligent automated cranes which make the cargo handling be performed effectively in the yards. For this plant, the modelling, tracking control, anti-sway system design, skew motion suppressing and complicated motion control and suppressing problems must be considered. Especially, in this paper, the system modelling and tracking control approach are discussed. And, we design the tracking control system incorporating an observer based on the 2DOF servo system design approach to obtain the desired state informations. In the case of observer design, a weighted $H_{\infty}$ error bound approach for a state estimator is considered. Based on an algebraic Riccati equation(inequality) approach, a necessary and sufficient condition for the existence of a full-order estimator which satisfies the weighted $H_{\infty}$ error bound is introduced. Where, the condition for existence of the estimator is denoted by a Linear Matrix Inequality(LMI) which gives an optimized solution and observer gain. Based on this result, we apply it to the tracking control system design for the transfer crane.

• 한국의류학회지
• /
• 제24권6호
• /
• pp.799-809
• /
• 2000

This study was designed for automated pattern drawing and grading a man's Durumagi, Korean traditional coat in order to reestablished and grade the pattern by Apparel CAD SYSTEM. For the study, AM-250 systems of Gerber as the computer and Macro program as the automated drawing were used. Also, PDS(Pattern Design System) was used for the grading of the original Durumagi pattern. Results were followings; First, the size data that could be standardized by reestablishing the pattern of a man's Durumagi by each size was presented. Second, The pattern was developed by each size. Third, new design was propose for mass production with the traditional design of the DURUMAGI Fourth, The time for making DURUMAGI pattern and the cost through the automated drawings by using the Macro program were reduced. Moreover, was presented the basic data for a ready to made garment like the Western garment. Five, A man's DURUMAGI by CAD System was graded that could be applied to ready to made Hanbok

• 한국건설관리학회논문집
• /
• 제10권4호
• /
• pp.76-86
• /
• 2009

최근 건설현장에서는 기능인력 수급의 어려움과 숙련공의 노령화의 해법으로 건설 자동화가 추진되고 있다. 현재 국내 건설자동화 연구수준은 작업 단위의 로봇을 통한 부분 자동화의 단계를 넘어 완전한 자동화로 건설할 수 있는 시스템 개발의 단계에 접어들고 있다. 하지만 완전한 건설 장비를 갖춘 자동화 시공 시스템일지라도 시공자의 유연성을 완전히 모방하기 어렵고, 부재 종류의 다양한 변화에 빨리 대처할 수 있는 능력이 부족하다. 따라서 자동화 시공 시스템의 작업 능력을 향상시킬 수 있고, 자동화된 시공 작업에 쉽게 접근할 수 있는 방법 중의 한 가지는 자동화 시공하기에 쉬운 부재를 설계해 주는 것이다. 따라서, 본 연구에서는 자동화 시공 시스템에 적합한 부재를 설계하기 위하여 품질기능전개(QFD)기법을 적용한 디자인 개발 프로세스를 제시하였다. 이를 통해 시공 자동화 시스템의 효율성을 향상시켜 건설자동화 기술 발전에 기여하고자 한다.

• 한국CDE학회논문집
• /
• 제21권3호
• /
• pp.313-324
• /
• 2016

As building information modeling (BIM) is expanding its influence in various fields of architecture, engineering, construction and facility management (AEC-FM) industry, BIM-based automated code compliance checking has become possible prospects. For the automated code compliance checking, requirements in building code need to be processed into explicit representation that enables automated reasoning. This paper aims to develop high-level methods that translate verb phrases into explicit representation. The high-level methods represent conditions, properties, and related actions of the building objects and clarify the core content of the constraints. The authors analyze building permit requirements in Korea Building Code and establish a standardized process of deriving the high-level methods. As a result, 60 kinds of the high-level methods were derived. In addition, method classification, analysis, and application are introduced. This study will contribute to the representation of explicit building code sentences and establishment of the automated building permit system of Korea.