• 대한산업공학회지
• /
• 제19권4호
• /
• pp.71-86
• /
• 1993

In design stage of a plastic injection mold, basic entities of various kinds are introduced under the concept of Group Technology to produce a full drawings of the mold more effectively Most of the entity data should be extracted from the assembly drawing by pattern matching technique. An automated design system is developed using the extracted data of entities and thus shows a good interfaces between the design stage and producing part explosion without any manual conversion procedure under the AutoCAD environment.

• 대한조선학회논문집
• /
• 제54권4호
• /
• pp.352-359
• /
• 2017

Because the Energy Efficiency Design Index(EEDI) came into effect in 2013, it is necessary to develop a new technology to overcome $CO_2$ emission regulations. In structural design viewpoint, lots of researches are carried out to develop eco-friendly and high fuel efficiency ships by weight reduction. By using the automated compartment arrangement system and automated structural design algorithm which were developed by the authors, new researches are performing to combine the above two systems. However, the effect of weight reduction was not significant because structural designs by using these systems for the midship part was carried out only focused on the minimum still water bending moment. In this paper, at first, good compartment arrangements which give the minimum still water bending moment and(or) shear force were chosen by using the automated compartment system. And then, influence of shear force on weight reduction was investigated by using the automated structural design algorithm considering longitudinal strength, local strength and shear strength of longitudinal members in cargo holds. Conclusively, it is necessary to consider the minimum still water bending moment and shear force simultaneously to reduce the weight of mid-sized bulk carrier. Also, good compartment arrangement which gives much more weight reduction compared with existing ship was proposed.

• 한국지능시스템학회논문지
• /
• 제16권6호
• /
• pp.677-682
• /
• 2006

멀티-도메인 공학시스템은 전기, 기계, 유압, 열등의 구성요소를 포함하고, 시스템 구성이 복잡하여 설계에 많은 어려움을 가지고 있다. 최적의 설계를 위해서는 각 도메인에 대한 통합된 설계 방법과 자동적이고 효율적인 탐색방법이 요구된다. 본 논문은 도메인에 독립적인 모델링 도구인 본드 그래프(Bond Graph)와 대규모 공간 해의 탐색에 접합한 진화 알고리즘의 일종인 유전 프로그래밍(Genetic Programming)를 결합하여 멀티 도메인 동적시스템에 대한 디자인 해를 자동적으로 생성해주는 설계 방법을 제시하였다. 제안된 설계방법의 효용성을 입증하기 위해서 3가지 서로 다른 도메인을 가진 아나로그 필터, 전동프린터 드라이브, 에어펌프 시스템에 대한 설계 결과가 기술된다.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1112-1118
• /
• 2004

Automated container terminals have been developed over the world years and many countries are interested in them because the amount of containers exported or imported is rapidly increasing. The conventional container terminals were not designed to handle this kind of heavily many containers. They would face many structural problems soon or later, although they have been managed to do well so far. One of the most important things in automated container terminal is the handing equipments able to transfer many containers efficiently. Those are maybe automated transfer cranes, automatic guided vehicles and automated quay-side cranes. The word 'automated' means the equipment is operated without drivers and those equipments are able to work without any interruption in working schedule. Through the researches on the conventional transfer cranes, we decided that the structure of conventional transfer cranes is not proper in automated container terminal and it is not possible to handle so many container in limited time. Therefore we have been studying on the proper structure of the automated container for past several years and a new type of transfer cranes has been developed. Design concept and control method of the new crane are introduced and experimental results are presented in this paper.his paper.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.422-430
• /
• 1996

The automated scanning laser Doppler vibrometer (LDV) has been designed, and built to measure in-plane displacements associated with waves propagating on vibrating structures. Use of optical fibers allows the compact design of a laser probe head which can be scanned over the vibrating structures. An algorithm for automated self-alignment of the laser probe is developed. The system is completely automated for scanning over the structures, focusing two laser beams at each data point until the detected vibration signal is stable, and for recording and transferring the data to a system computer. The automated system allows one to get extensive data of the vibration field over the structures. The system is tested by scanning a piezoelectric cylindrical shell and a plate excited by a continuous signal and by a pulse signal, respectively. Results show that the automated scanning LDV system can be a useful tool to measure the in-plane vibration field and to detect the elastic waves propagating on the vibrating structures.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.352-356
• /
• 2002

In this paper, an automated design system of suspension and steering parts is developed. The system automates the processes of 3-D modeling and 2-D drafting of the parts. In addition, the BOM and dimension data of the designed part is also automatically transferred to the database of ERP system. The system is developed by using the functions of parametric design and API(application Programming Interface) of the a commercial solid modeler.

• 한국경영과학회지
• /
• 제13권2호
• /
• pp.34-46
• /
• 1988

This paper deals with design problem of unit load automated storage/retrieval systems (AS/RS). We propose an optimal design model in which the investment and maintenance costs of AS/RS, operating under dual command model is minimized over a time horizon satisfying the warehouse dimensional constraints. The model is formulated as an integer nonlinear program and an algorithm is proposed to find an optimum solution. The valididty of the solution algorithm is illustrated through an example.

• 산업공학
• /
• 제2권1호
• /
• pp.37-45
• /
• 1989

Guide path design is the most important factor in planning automated guided vehicle systems(AGVS) in manufacturing shop environments. This paper studies a heuristic procedure to design an optimal bi-directional guide path with the objective of the minimum total travel time of the vehicles. An example is solved to validate the procedure developed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.753-758
• /
• 2008

A CAM program for forming design Automated of CAM for Spring using car was developed in this study. This program was written in AUTO LISP on the AUTO CAD system with a personal. An approach to the system is based on the kinemateic of the object function. We make a determination of an cam programming. A CAM spline is continuous in displacement. velocity and acceleration. This program which can design Coil Spring shapes will successfully support CAN designing and manufacturing for Small & Medium companies.

• 대한전자공학회논문지
• /
• 제23권6호
• /
• pp.988-994
• /
• 1986

We present an automated CMOS standard cell design mehtodology which generates a mask description in the CIF (Caltech Intermediate Form)from a user-given logic description and design rule. The resultant layout reflects the user's choice among N-well, P-well and twin-well process and user's decision whether the guard band is to be included or not. Noise margin of each cell was improved by carefully adjusting the channel width of P-FET.