DOI QR코드

DOI QR Code

On the Weight Reduction of Longitudinal Members of Mid-Sized Bulk Carrier Considering the Minimum Shear Force according to Compartment Arrangement based on H-CSR

구획배치에 따른 최소 전단력을 고려한 H-CSR 기반 중형 살물선 종강도 부재의 중량 절감 방안 연구

  • Na, Seung-Soo (Department of Naval Architechture, Mokpo National University) ;
  • Song, Ha-Cheol (Department of Naval Architechture, Mokpo National University) ;
  • Jeong, Sol (Department of Naval Architechture & Ocean Engineering, Mokpo National University) ;
  • Park, Min-Cheol (Department of Naval Architechture & Ocean Engineering, Mokpo National University) ;
  • Bae, Sang-Don (Department of Naval Architechture & Ocean Engineering, Mokpo National University)
  • 나승수 (목포대학교 조선공학과) ;
  • 송하철 (목포대학교 조선공학과) ;
  • 정솔 (목포대학교 조선해양시스템공학과) ;
  • 박민철 (목포대학교 조선해양시스템공학과) ;
  • 배상돈 (목포대학교 조선해양시스템공학과)
  • Received : 2017.07.17
  • Accepted : 2017.08.11
  • Published : 2017.08.20

Abstract

Because the Energy Efficiency Design Index(EEDI) came into effect in 2013, it is necessary to develop a new technology to overcome $CO_2$ emission regulations. In structural design viewpoint, lots of researches are carried out to develop eco-friendly and high fuel efficiency ships by weight reduction. By using the automated compartment arrangement system and automated structural design algorithm which were developed by the authors, new researches are performing to combine the above two systems. However, the effect of weight reduction was not significant because structural designs by using these systems for the midship part was carried out only focused on the minimum still water bending moment. In this paper, at first, good compartment arrangements which give the minimum still water bending moment and(or) shear force were chosen by using the automated compartment system. And then, influence of shear force on weight reduction was investigated by using the automated structural design algorithm considering longitudinal strength, local strength and shear strength of longitudinal members in cargo holds. Conclusively, it is necessary to consider the minimum still water bending moment and shear force simultaneously to reduce the weight of mid-sized bulk carrier. Also, good compartment arrangement which gives much more weight reduction compared with existing ship was proposed.

Keywords

References

  1. International Association of Classification Societies, 2015. Common structural rules for bulk carriers and oil tankers. [Online] (Update January 2015) Available at: http://www.iacs.org.uk [Accessed May 2016].
  2. Jeong, S. Moon, S.C. Song, H.C. & Na, S.S., 2015. Development of automated algorithm of intergrated structural design system based on CSR-H for bulk carrier. Team 2015 The 29th Asian-Pacific Technical Exchange and Advisory Meeting on Marine Structures, Vladivostok, 12-15 October 2015, pp.263-266.
  3. Korean Register, 2015. SeaTrust-Hullscan user guide. Korean Register: Busan
  4. Moon, S.C., 2015. Development of the structural design algorithm according to compartment of arrangement based on HCSR. Master's Thesis. Mokpo National University.
  5. Na, S.S. Song, H.C Jo, D.Y. Shim, C.S. Lee, G.H. Jeong, S. Heo, J.H. Jeong, T.S. Lee, C.H. Jo, Y.C & Kim, D.C. 2013a. Development of automated algorithm for compartment arrangement of oil tanker. Journal of the Society of Naval Architects of Korea, 50(1), pp.59-68. https://doi.org/10.3744/SNAK.2013.50.1.59
  6. Na, S.S. Song, H.C. Jeong, S. Youn, G.E. Lee, J.R. Lee, H.G. & Park, H.G., 2013b. Development of Optimization System for Compartment Arrangement of bulk carrier. Proceedings of the Annual Autumn conference, SNAK, 23-25 May.
  7. Na, S.S. Song, H.C. Jeong, S. Youn, G.E. Lee, J.R. Lee, H.G & Park, H.G., 2013c. The strategy for optimum compartment arrangement of oil tanker and bulk carrier. Proceedings of the Annual Autumn conference, SNAK, 7-8 November.
  8. Na, S.S. Song, H.C Jeong, S. Park, M.C. & Jeon, H.G. 2016. A study on the weight reduction of mid-sized bulk carrier based on the harmonized common structural rules. Journal of the Society of Naval Architects of Korea, 53(4), pp.336-342. https://doi.org/10.3744/SNAK.2016.53.4.336
  9. Park, C.I. Jeong, S. Song, H.C. Na, S.S. Park, M.C. Shin, S.H. & Lee J.Y. 2016. Development of an automated design algorithm for the longitudinal members of oil tankers based on H-CSR. Journal of the Society of Naval Architects of Korea, 53(6), pp. 503-513. https://doi.org/10.3744/SNAK.2016.53.6.503
  10. Sung, C.H. & Lee, S.K., 2015. Comparison analysis on requirement of structural members by application of harmonized common structural rules. Journal of the Society of Naval Architects of Korea, 52(3), pp. 265-274. https://doi.org/10.3744/SNAK.2015.52.3.265