• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.1
• /
• pp.21-28
• /
• 2019

As the automated vehicle system evolves, electronic devices and control software installed in vehicles are increasing. Therefore, automated vehicle electrical and electronic system (E/E system) design for ensure system integration, software modularization, system reusability, and scalability at the design stage of the automated vehicle is actively studied. This paper introduces a design methodology for automated vehicle E/E systems that employs by using cyber-physical systems (CPS). An automated forklift system was designed to examine the effectiveness of the proposed methodology. This paper showed that the proposed CPS design methodology enables an effective development of automated E/E control systems. Compare to existing design methodologies, it provides higher reusability of individual modules and an easier way to integrate control system elements such as controllers, sensors, and actuators.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1998.03a
• /
• pp.129-135
• /
• 1998

The present automated manufacturing environment is very different when the classical statiscal process control method based on batch processing were used. Therefore these must be replaced by automated statiscal process control method. In this point of view , this study intends to develop the automated statiscal process control method which can be implemented in the proesent automated manufacturing environment . Specially this study suggested modified control limit line and developed the rule to identify the special cause of the manufacturing process in the aspect of the ppm manegement.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.8
• /
• pp.834-841
• /
• 2006

Recently, many enterprises are installing AMSs(Automated Manufacturing Systems) for their competitive advantages. As the level of automation increases, proper design and validation of control logic is a imperative task for the successful operation of AMSs. However, current discrete event simulation methods mainly focus on the performance evaluation. As a result, they lack the modeling capabilities for the detail logic of automated manufacturing system controller. Proposed in this paper is a method of validation of the controller logic for automated material handling system using an object-oriented design and simulation. Using this method, FA engineers can validate the controller logic easily in earlier stage of system design, so they can reduce the time for correcting the logic errors and enhance the productivity of control program development Generated simulation model can also be used as a communication tool among FA engineers who have different experiences and disciplines.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1112-1118
• /
• 2004

Automated container terminals have been developed over the world years and many countries are interested in them because the amount of containers exported or imported is rapidly increasing. The conventional container terminals were not designed to handle this kind of heavily many containers. They would face many structural problems soon or later, although they have been managed to do well so far. One of the most important things in automated container terminal is the handing equipments able to transfer many containers efficiently. Those are maybe automated transfer cranes, automatic guided vehicles and automated quay-side cranes. The word 'automated' means the equipment is operated without drivers and those equipments are able to work without any interruption in working schedule. Through the researches on the conventional transfer cranes, we decided that the structure of conventional transfer cranes is not proper in automated container terminal and it is not possible to handle so many container in limited time. Therefore we have been studying on the proper structure of the automated container for past several years and a new type of transfer cranes has been developed. Design concept and control method of the new crane are introduced and experimental results are presented in this paper.his paper.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.746-751
• /
• 2004

Demands for higher productivity in container terminal environments continues to escalate consideration of equipment upgrades. And then transportation of containers using the automated container crane becomes more and more important for productivity enhancements. Introducing a hybrid control architecture to the container crane, it provides a effective means to the automated operation of the container crane. This paper addresses the methodology for automation of container cranes. In addition, this paper proposes a new control architecture for the automated container crane and explains each component of that architecture. The control architecture is composed of a deliberative control layer, a sequencing layer, and a reactive control layer. The proposed architecture is applied to a dual-hoist double-trolley container crane.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1287-1296
• /
• 2014

This paper is about control of Automated Guided Vehicle for path following using fuzzy logic controller. The Automated Guided Vehicle is a tricycle wheeled mobile robot with three wheels, two fixed passive wheels and one steering driving wheel. First, kinematic and dynamic modeling for Automated Guided Vehicle is presented. Second, a controller that integrates two control loops, kinematic control loop and dynamic control loop, is designed for Automated Guided Vehicle to follow an unknown path. The kinematic control loop based on Fuzzy logic framework and the dynamic control loop based on two PID controllers are proposed. Simulation and experimental results are presented to show the effectiveness of the proposed controllers.

• Journal of Korean Society for Quality Management
• /
• v.25 no.1
• /
• pp.116-134
• /
• 1997

The present automated manufacturing environment is very different when the classical statistical process control method based on batch processing were used. Therefore these must be replaced by automated statistical process control method. In this point of view, this paper intends to develop the automated statistical process control method which can be implemented in the present automated manufacturing environment. Specially this study developed the rules to identify the special causes of the manufacturing process in the aspect of the 100 PPM management, and a numerical example is demonstrated to verify the usefulness of these rules.

• Journal of Korean Society for Quality Management
• /
• v.16 no.2
• /
• pp.48-55
• /
• 1988

There have been several papers to illustrate how an information system is used in an automated warehouse system. These papers, however. do not carefully address the role of warehouse planning/control systems nor do they recognize how to integrate the management planning/control systems, and automated warehouse system. This article addresses such issues and shows how a business computer system can be used to integrate and unify the warehouse planning/control systems and the automated warehouse system into it single and highly productive operating system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.1
• /
• pp.26-32
• /
• 2007

The most important thing in the container terminal is to handle the cargo effectively in the limited time. To achieve this object, many strategies have been introduced and applied to. If we consider the automated container terminal, it is necessary that the cargo handling equipments are equipped with more intelligent control systems. From the middle of the 1990's, an automated rail-mounted gantry crane(RMGC) and rubber-tired gantry crane(RTG) have been developed and widely used to handle containers in the yards. Recently, in these cranes, the many equipments like CCD cameras and sensors are mounted to cope with the automated terminal environment. In this paper, we try to support the development of more intelligent automated cranes which make the cargo handling be performed effectively in the yards. For this plant, the modelling, tracking control, anti-sway system design, skew motion suppressing and complicated motion control and suppressing problems must be considered. In this paper, the system modelling and a tracking control approach are discussed. And, we design the tracking control system incorporating an observer based on the 2DOF servosystem design approach to obtain the informations of the states. The experiment results show the usefulness of the designed control system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.12
• /
• pp.1287-1294
• /
• 2004

Automated container terminals have been being developed over the world for recent years and many countries are interested in it because the amount of containers exported or imported is rapidly increasing. The conventional container terminals were not designed to control this kind of heavily many containers. They would face many structural problems soon or later, although they have managed to do well so far. One of the most important things in developing automated container terminal is to develop the equipment able to handle many containers efficiently. Those are maybe automated transfer cranes, automatic guided vehicles, and automated quay-side cranes. The word 'automated' means the equipment is operated without drivers and those equipments are able to work without any interruption in working schedule. Through the researches on the conventional transfer cranes, we decided that the structure of the conventional transfer cranes is not efficient in automated container terminal and it's not possible to handle so many containers in limited time. Therefore we have been studying on the proper structure of the automated container crane for past several years and a new type of transfer crane has been developed. Design concept and control method of a new type of transfer crane had been presented in the previous paper: Part Ⅰ. Experimental features will be presented with a model transfer crane in this paper: Part Ⅱ.