• Journal of the Korean Society of Combustion
• /
• v.15 no.4
• /
• pp.1-8
• /
• 2010

Mild combustion is considered as a promising combustion technology for energy saving and low emission of combustion product gases. In this paper, the controllability of reaction region in mild combustion is examined by using co-axial air nozzle. For this purpose, numerical approach is carried out. Propane is considered for fuel and air is considered for oxidizer and the temperature of air is assumed 900K slightly higher than auto ignition temperature of propane. But unlike main air, the atmospheric condition of co-axial air is considered. Various cases are conducted to verify the characteristics of Co-Axial air burner configuration. The use of coaxial air can affect reaction region. These modification help the mixing between fuel and oxidizer. Then, reaction region is reduced compare to normal burner configuration. The enhancement of main air momentum also affects on temperature uniformity and reaction region. The eddy dissipation concept turbulence/chemistry interaction model is used with two step of global chemical reaction model.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.750-755
• /
• 2013

In-wheel motor system gets the driving force from direct-driven motor in the wheel of electric vehicle. It is known as good system for vehicles, from an efficiency, packaging, handling and safety. This paper describes motor and inverter technologies, system configuration and control algorithms for in-wheel type electric vehicle. It is necessary to control on an interrelation perspective because this system drives two motors at same time. In system design, IPMSM(Interior Permanent Magnet Synchronous Motor) including a wide operating range and high-speed rpm is used and flux weakening control is performed in constant power range. Under the torque command from the host controller, auto control box, inverter's output torque is calculated with using torque estimation technique and applied to actual vehicle driving system. It is verified that the configuration and the algorithm are suitable for the in-wheel motor system.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.640-643
• /
• 2002

링크 관리 프로토콜에서 데이터 링크의 연결성 검증 및 링크 식별자의 자동 매핑을 위하여 교환하는 Test 메시지와 제어채널의 IP 주소를 자동으로 발견하기 위한 Bootstrap 메시지는 제어채널이 아닌 데이터 링크로 전달되므로 광 네트워크에서 불투명한 스위칭 기술을 요구한다. 본 논문에서는 불투명한 스위칭 기술을 지원하지 않는 광 네트워크에서 망 관리 기능을 이용하여 인접 노드 사이의 제어채널에 대한 IP 주소 및 인접 노드와 데이터 링크에 대한 식별자를 자동으로 구성 할 수 있는 메커니즘을 제안한다. 망 관리를 통한 자동 구성은 불투명한 스위칭 기술을 지원하지 않는 광 네트워크에서 수동 구성에 따른 오류 발생의 가능성을 개선시킬 수 있다.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.469-471
• /
• 2005

Paper searches Neighbor Discovery Protocol's IPv6 address AutoConfiguration function that is IPv6's point technology. Also, I study plan to apply Router Advertisement function to Router. Router is formed whole system by Routing Process Card that do manager and Line Card that take charge of Packet Forwarding. Present plan that embody Router Advertisement function to Line Card.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.493-495
• /
• 2004

IPv6 프로토콜은 현재 인터넷 프로토콜로 사용되고 있는 IPv4 프로토콜이 가지고 있는 주소 고갈 문제, 미흡한 QoS지원, 그리고 다양한 보안 문제를 해결하도록 설계되었다. 이 중에서 이동기기의 원활한 IPv6 네트워크와의 접속을 위하여 IPv6 프로토콜에서는 주소자동설정 기능이 추가되었으나, 이 기능을 악용한 서비스거부 공격 발생 가능성이 존재한다 이에 본 논문에서는 IPv6 프로토콜의 주소자동설정 기능을 악용한 서비스거부공격에 대응할 수 있는 메커니즘으로써 RA 메시지에 일회용 키를 사용하는 방법을 제안한다.

• Smart Media Journal
• /
• v.7 no.4
• /
• pp.9-16
• /
• 2018

In order to improve the economics and flexibility of cloud computing, tendency to automate the operation and management of cloud resources has become complicated. However, while automation for cloud storage depends on the manufacturer's storage hardware, it cannot flexibly support the storage type in accordance with users' needs. In this paper, we propose an automatic configuration module that supports block/file/object storages suitable for user environment. In order to automatically install ceph, a cloud storage, we propose an automatic installation and configuration module based on the Chef configuration management tool. In addition to that, we also propose an automatic configuration module based on a shell programming in pursuit of enabling users to use ceph storage of block/file/object. The proposed method can automatically set up and manage shared file, block, and object storages in a virtual or physical user environment with no hardware dependencies.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.149-155
• /
• 2010

Currently various safety tests are being performed in many countries with growing interest in vehicle safety. However the vehicles which have good safety performance in these tests could not secure the good performance in real car to car accident. So new test protocol using progressive deformable barrier (PDB) was proposed by EEVC in Europe, NHTSA in USA and some vehicle manufacturers, etc. The target of PDB test is to control partner protection in addition to self-protection on the same test. The proposal is to update current ECE R.94 frontal ODB test. So barrier, impact speed, overlap are changed to avoid bottoming-out in the test configuration. In this paper 3 different tests (R.94, EuroNCAP and PDB test) were carried out using current production vehicles with same structure. The results of these tests were compared to understand PDB test. As a result PDB test shows the highest vehicle deceleration and dummy injury because PDB offers a progressive increase in stiffness in depth and height. However vehicle intrusion was affected with rather test velocity than stiffness of deformable barrier. PDB deformation data is used for partner protection assessment using PDB software and it shows that the test vehicle is rather not aggressive.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.3
• /
• pp.141-152
• /
• 2007

In this paper, we present a network-oriented lightweight real-time system, which is composed of an event-driven operating system called the Embedded Lightweight Operating System (ELOS) and a generic multi hop ad hoc routing protocol suite. In the ELOS, a conditional preemptive FCFS scheduling method with a guaranteed time slot is designed for efficient real-time processing. For more elaborate configurations, we reinforce fault tolerance by supplementing semi-auto configuration using wireless agent nodes. The developed hardware platform is also introduced, which is a scalable prototype constructed using off-the-shelf components. In addition, in order to evaluate the performance of the proposed system, we developed a ubiquitous network test-bed on which several experiments with respect to various environments are conducted. The results show that the ELOS is considerably favorable for tiny ubiquitous networked systems with real-time constraints.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1439-1446
• /
• 2011

This paper describes the algorithm that lowers the dimension, maintains the object recognition and significantly reduces the eigenspace configuration time by combining the higher correlation feature information and Principle Component Analysis. Since the suggested method doesn't require a lot of computation than the method using existing geometric information or stereo image, the fact that it is very suitable for building the real-time system has been proved through the experiment. In addition, since the existing point to point method which is a simple distance calculation has many errors, in this paper to improve recognition rate the recognition error could be reduced by using several successive input images as a unit of recognition with K-Nearest Neighbor which is the improved Class to Class method.

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.1
• /
• pp.51-57
• /
• 2020

The fighter pilot uses radar mounted on the fighter to obtain high-resolution SAR (Synthetic Aperture Radar) images for a specific area of distance, and then the pilot visually classifies targets within the image. However, the target configuration captured in the SAR image is relatively small in size, and distortion of that type occurs depending on the depression angle, making it difficult for pilot to classify the type of target. Also, being present with various types of clutters, there should be errors in target classification and pilots should be even worse if tasks such as navigation and situational awareness are carried out simultaneously. In this paper, the concept of operation and functional structure of radar system for fighter jets were presented to transfer the SAR image target classification task of fighter pilots to radar system, and the method of target classification with high accuracy was studied using the CNN ensemble model to archive higher classification accuracy than single CNN model.