• 한국재료학회지
• /
• 제17권3호
• /
• pp.167-172
• /
• 2007

The separation of the small colloidal particles from the mixture of two different sized particles using AC dielectrophoresis phenomenon was studied. The spherical mono-dispersed polystyrene particles dispersed in pure water were put into a perfusion chamber on a substrate, and AC electric fold was applied to the glass substrate with Au electrodes in 4 mm distance. The AC frequency was fixed at 1 kHz and the intensity of the field was varied from 25 V/cm to 160 V/cm. After applying the AC field, the degree of the chain formation that resulted from the particle movements by dielectrophoresis was observed by optical microscope. The mixture of the $1\;{\mu}m\;and\;5\;{\mu}m$ sized polystyrene particles at 0.5 vol% concentrations for each size was set in the dielectrophoresis conditions of 1 kHz and 100 V/cm. At this condition large $5\;{\mu}m$ sized polystyrene particles formed chains, on the contrary the $1\;{\mu}m$ sized polystyrene particles formed no chains. After water flowing for 20 min, it was found that small particles that were floating in the chamber had been removed by the water flowing.

• Progress in Superconductivity
• /
• 제12권1호
• /
• pp.41-45
• /
• 2010

Low temperature micro-calorimeters have been employed in the field of high resolution alpha spectrometers. These alpha detectors typically consist of a superconducting or metal absorber and a temperature sensor. The temperature sensor can be a transition edge sensor (TES), a metallic magnetic calorimeter (MMC) or other low temperature detectors for an accurate measurement of temperature change due to an alpha particle absorption. We report a recent study of the heat flow between a replaceable absorber and a temperature sensor. A piece of gold foil in $2.4{\times}2.7{\times}0.03\;mm^3$ is used as an absorber. A $40\;{\mu}m$ diameter Au:Er paramagnetic sensor is attached to another small piece of gold foil in $400{\times}200{\times}30\;{\mu}m^3$ to serve as the temperature sensor. This sensor assembly, Au:Er and gold foil, is placed on a miniature SQUID susceptometer in a gradiometric configuration. The thermal connection between the absorber and the sensor was made with three gold bonding wires. The measured thermal conductance shows a linear dependence to the temperature. The values are in a good agreement with Wiedemann-Franz type thermal conductance of the gold wires.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권5호
• /
• pp.182-188
• /
• 2003

We have demonstrated a fluidic technique for self-assembly of microfabricated parts onto substrate using patterned shapes of magnetic force self-assembled monolayers (SAMs). The metal particles and the array were fabricated using the micromachining technique. The metal particles were in a multilayer structure (Au, Ti, and Ni). Sidewalls of patterned Ni dots on the array were covered by thick negative photoresist (SU-8), and the array was magnetized. The array and the particles were mixed in buffer solution, and were arranged by magnetic force interaction. Binding direction of the metal particle onto Ni dots was controlled by multilayer structure and direction of magnetization. A quarter of total Ni dots were covered by the particles. The binding direction of the particles was controllable, and condition of particles was almost even with the Au surface on top. The particles were successfully arranged on the array.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.276-276
• /
• 2013

Here we report an integrated microdevice consisting of an efficient passive mixer, a magnetic separation chamber, and a capillary electrophoretic microchannel in which DNA barcode assay, target pathogen separation, and barcode DNA capillary electrophoretic analysis were performed sequentially within 30 min for multiplex pathogen detection at the single-cell level. The intestine-shaped serpentine 3D micromixer provides a high mixing rate to generate magnetic particle-pathogenic bacteria-DNA barcode labelled AuNP complexes quantitatively. After magnetic separation and purification of those complexes, the barcode DNA strands were released and analyzed by the microfluidic capillary electrophoresis within 5 min. The size of the barcode DNA strand was controlled depending on the target bacteria (Staphylococcus aureus, Escherichia coli O157:H7, and Salmonella typhimurium), and the different elution time of the barcode DNA peak in the electropherogram allows us to recognize the target pathogen with ease in the monoplex as well as in the multiplex analysis. In addition, the quantity of the DNA barcode strand (~104) per AuNP is enough to be observed in the laser-induced confocal fluorescence detector, thereby making single-cell analysis possible. This novel integrated microdevice enables us to perform rapid, sensitive, and multiplex pathogen detection with sample-in-answer-out capability to be applied for biosafety testing, environmental screening, and clinical trials.

• 대한화학회지
• /
• 제44권1호
• /
• pp.60-67
• /
• 2000

표면공명흡수는 매질의 유전상수값에 의존한다. 금 나노미립자가 함침된 $TiO_2/SiO_2$ 복합산화물 박막을 $Ti(OPr^i)_4$과 $Si(OEt)_4$, 그리고 $HAuCl_4{\cdot}7H_2O$를 사용하여 졸-겔 방법으로 제조하였다. $TiO_2/SiO_2$ 박막에 함침된 금 나노미립자의 최대 표면 공명 흡수는 $TiO_2/SiO_2$의 몰비에 따라 540 nm에서 615 nm 까지 선형적으로 변하였다. 이러한 박막에 함침된 금 나노미립자의 크기와 구조를 TEM과 XRD로 측정하였다. 그리고 $TiO_2/SiO_2$ 박막의 유전상수값을 실험 data로부터 이론적으로 계산하였다

• 한국광물학회지
• /
• 제32권3호
• /
• pp.185-200
• /
• 2019

본 연구목적은 비-가시성 금 정광(Au = 1,840.00 g/t)으로부터 금을 단체분리 시키기 위하여 마이크로웨이브-질산침출 실험을 수행하였다. 이를 위해 질산농도 효과, 마이크로웨이브 침출시간 효과 그리고 시료 첨가량 효과에 대하여 마이크로웨이브-질산침출 실험을 수행하였다. 본 연구의 실험조건에서는 금이 전혀 침출되지 않은 것으로 조사되었다. 불용성-잔류물의 무게는 질산 농도, 마이크로웨이브 침출시간 그리고 시료 첨가량이 증가할수록 감소하는 경향으로 나타났다. 불용성-잔류물에 대하여 XRD 분석한 결과 석고와 anglesite가 나타나는데 이는 정광에 포함된 방해석과 방연석이 질산용액과 반응하여 생성된 것으로 사료된다. 불용성-잔류물에 대하여 납-시금법을 수행한 결과 정광보다 금함량이 최소 1.3배(Au = 2,464.70 g/t)에서 최대 28.8배(52,952.80 g/t)로 높게 나타났다. 그러나 납-시금법에서 회수된 금 함량은 gold nugget effect가 매우 심하게 나타났다. 향후, 마이크로웨이브-질산침출 실험에서 정광의 시료채취 방법을 개선하고, 더 작은 기공 크기의 여과지를 사용하여 침출용액을 여과하고 납-시금법에서 여과지를 태워서 시료로 투입하는 방법을 수행한다면 gold nugget effect를 감소시킬 수 있을 것으로 기대된다.

• 한국입자에어로졸학회지
• /
• 제9권4호
• /
• pp.201-208
• /
• 2013

Copper (II) and Nickel (II) mimic complexes of enzyme carbonic anhydrase were evaluated under ambient condition for carbon dioxide capture and conversion process. The synthesized complexes were characterized by ATR-FTIR and UV-DR spectroscopy. It was found that all the complexes have biomimetic activity towards $CO_2$ using para-nitrophenyl acetate (p-NPA) hydrolysis as the model reaction. Interestingly, the proper geometry obtained by the restricted orientation of tripodal N atoms in Cu (II) complex of 2,6-bis(2-benzimidazolyl) pyridine showed the highest activity (1.14 au) compared to others. The $CO_2$ bio-mineralization to $CaCO_3$ was carried out via in-vitro crystallization approach. Results indicate that the biomimetic complexes have a role in determining $CaCO_3$ morphology. The present observations establish a qualitative insight for the design of improved small-molecule catalysts for carbon capture.

• 한국방사선학회논문지
• /
• 제13권5호
• /
• pp.791-799
• /
• 2019

선량 증강 현상에서 발생하는 물리적 특성과 증강 물질과의 상호 작용으로부터 발생하는 이차입자 생성을 평가하였다. Geant 4, MIRD 두부 팬텀을 이용한 몬테카를로 전산 모사를 진행하였으며, 선형가속기에서 발생되는 4, 6, 10, 15, 18, 25 MV X선을 선원으로 적용하였다. 10, 20, 30 mg/g의 금(aurum), 가돌리늄(gadolinium) 증강 물질을 팬텀 내부 종양에 모사하였으며, 물리적 상호작용의 변화와 이차입자 발생에 따른 입자플루언스와 초기 에너지로부터 방사선가중인자를 고려하여 등가선량을 평가하였다. 방사선 선량 증강 물질에 의한 상호작용은 고 원자번호에서 기인하여 광전효과에 의한 에너지 흡수를 높이는 것으로 나타났으며, 10 MV 이상의 에너지에서는 광핵반응의 증가를 나타내었다. 이로 인해, 팬텀 내부에서 양성자, 중성자와 같은 이차입자 발생의 증가를 보였으며, 중성자에 의한 등가선량이 최대 424.2배 증가하는 것으로 나타났다. 본 연구는 선량 증강 현상에서의 에너지 전달, 흡수의 물리적 과정을 모사하여, 증강 현상에서 발생하는 물리적 특성을 분석하고자 하였다. 이러한 결과는 향후 in-vivo, in-vitro 선량 증강 실험을 위한 기초 자료로 활용될 수 있을 것으로 사료된다.

• 한국의학물리학회지:의학물리
• /
• 제9권1호
• /
• pp.37-46
• /
• 1998

Beta-particle energy distributions of the radionuclides in medicine are calculated for the medical physics applications. The radial component solutions of Dirac wave equations are evaluated for a point-nucleus un screened Coulomb potential. The WKB method is employed to correct the screening due to the orbital-electron cloud. Fierz interference terms are ignored. The radionuclides considered are $\^$32/P, $\^$90/Y, $\^$131/I, $\^$166/Ho, $\^$192/Ir, $\^$198/Au, $\^$153/Sm, $\^$169/Er and $\^$188/Re. A total of 9 beta-spectra for the radionuclides, currently in domestic use or potential use in the near future, are calculated with enough accuracy and presented in graphs and tables.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2006년도 총회 및 춘계학술발표회
• /
• pp.41-44
• /
• 2006

The objective of this study was to evaluate the stabilization of As and heavy metals in tailings from the Samkwang Au-Ag mine with $Ca(OH)_2$. In order to evaluate the stabilization ability of As and heavy metals in the tailings, column test was implemented with various conditions as 1) particle size of $Ca(OH)_2$, 2) mixing method and 3) flow rate of eluents during 60 days. The results showed that addition with 5% of $Ca(OH)_2$ in 1kg of the tailings had the most effective ability of stabilization up to 95%. In addition, stabilization ability of As and heavy metals in tailings was enhanced using a fine powder of $Ca(OH)_2$. Therefore, stabilization technology can be used as a remediation of As and heavy metals in mine wastes including tailings and a nearby soils from abandoned metal mines.