• Journal of the Ergonomics Society of Korea
• /
• v.26 no.1
• /
• pp.79-85
• /
• 2007

Demand forecasting methods for a consumer product such as TV or refrigerator are widely known. However, sales forecast for a brand new product cannot be estimated using conventional forecasting methods. This study proposes a five-step procedure in forecasting a newly developed product. Step one defines functions in a High Touch product in order to estimate relative attraction of the product to consumer group. In step two, for a comparison purpose, a compatible product that is successfully penetrated into market is selected. Step three breaks a target population into many segments based on demography. Step four calculates relative attraction between the High Touch product and the compatible product. Finally, market penetration rate of the High Touch product is estimated using a bell-shaped diffusion curve of the compatible product. The process offers a method to estimate potential demand and growth pattern of the new High Touch product.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.2
• /
• pp.77-83
• /
• 2000

This paper deals with the design of a touch free eddy-current brake for high speed transportation systems by using 2-dimensional Finite Element Method (2-D FEM). The eddy current brake systems have to equipped with maximum braking force and deceleration at the given volume or mass, high braking force at small rate, attraction forces as small as possible and stable construction. The parameters, such as the number of pole, electric ampere-turns and slot width have influence on these braking characteristics. For the magnet to satisfy above-mentioned performance in high speed, the braking performance according to variation of the parameters are analyzed by the 2-D FEM. In addition, the magnet stack width is determined from equivalent stack width that is calculated by solution of the Field with scalar potential. From these results, the magnet of optimized configuration with maximum braking force and minimum attraction force is designed by the process of detail design.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.103-112
• /
• 2021

The labor force plays an important role in attracting foreign direct investment (FDI) both in developed and developing countries. In countries where there are appropriate policies for training human resources and maintaining the health of human resources, such countries have a competitive advantage and can attract FDI inflows, besides having a workforce to meet the needs of foreign investors. The purpose of this paper is to analyze the effect of the labor force and several other factors on FDI attraction in Vietnam. The empirical model is employed to perform regression and correlation on the impact of the labor force, real gross domestic product, inflation, index of business freedom, and index of investment freedom on Vietnam's FDI attraction by using a secondary time series data set during the period 1995-2018. The empirical results found that both labor force and inflation have a positive influence on FDI at a 5% significance level; index of business freedom has a positive impact on FDI at a 10% significance level, and real gross domestic product and index of investment freedom have a positive impact on FDI at a 1% significance level. From these results, this study proposes several important policy implications for Vietnam in attracting FDI in the future.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.4
• /
• pp.316-326
• /
• 2011

In this study, the entrapped number is investigated on the UV light with different illuminance to fluorescent bait cage for swimming crab in order to find the appropriate illuminance which has the best attraction effect of fluorescent bait cage for pots. In addition, preference to the light, arrival time and residence time at light area are compared and analyzed to fluorescent bait cage and non-fluorescent bait cage for American lobster at the UV light and ordinary light according to the illuminance condition. Pot with red non-fluorescent bait cage at the no lighting (<0.01lux), pot with blue fluorescent bait cage at the 20W UV lighting (0.16lux) and pot with blue fluorescent bait cage at the 30W UV lighting (0.22lux) were soaked for 6 hours and the entrapped number of swimming crab was examined. The mean entrapped number of swimming crab in pot with red non-fluorescent bait cage at the no lighting (<0.01lux) was 1.0, but the mean entrapped number of swimming crab in pot with blue fluorescent bait cages at the 20W UV lighting (0.16lux) and 30W UV lighting (0.22lux) were 1.4 and 0.4, respectively (P<0.05). The rate of preference to the blue fluorescent bait cage at the UV lighting shows 1.6-4.8 times higher than that of preference to the red non-fluorescent bait cage at the ordinary lighting. In addition, The rate of preference to the blue fluorescent bait cage at the UV lighting is higher when the illuminance of ordinary light is same as or is lower than that of UV light (P<0.05). However, the preference to the light depending on gender shows no significant difference (P>0.05). The arrival time to UV light area of lobster is shown as 1.2-2.4 times faster than that to ordinary light area. Generally, it is shown that arrival time to UV light area is faster than the arrival time to ordinary light area when the illuminance of ordinary light is the same as or lower than that of UV light (P<0.05). However, arrival time to the light area depending on gender shows no significant difference (P>0.05). The residence time at UV light area of lobster is 1.2-1.7 times longer than that at ordinary light area. The residence time depending on different illuminance of ordinary light and genders showed no significant difference (P>0.05).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.908-911
• /
• 2002

Recently deep interests and attraction have been paid on the generation of ozone, which is widely used to remove bed smell and to clear water. In this paper the silent discharge and ozone generation characteristics of various typed discharge chambers were investigated experimentally. Dielectric of $Al_2O_3$ was embedded in the cylindrical type of discharge chamber to improve the ozone generation rate and to stabilize the silent discharge mode of operation. Discharge current and ozone concentration depend strongly on the applied voltage and frequency.

• KSBB Journal
• /
• v.25 no.6
• /
• pp.553-558
• /
• 2010

Increasing demands on fossil fuel have led to the unprecedented attraction to microalgal biofuel as an alternative energy. In this study, we investigated growth and lipid productions of microalga Nannochloris oculata under various carbon dioxide or nitrogen source concentrations and irradiance conditions. Biomass production of N. oculata was highest under 2% $CO_2$ with 0.3 flow rate (vvm). In addition, biomass productivities were proportional to the concentration of nitrogen source, whereas lipid biosynthesis was suppressed under higher nitrogen concentration (up to 50 mg/L). High irradiation ($160{\sim}180\;{\mu}mol/m^2{\cdot}s$) enhanced growth rate and lipid production of N. oculata.

• Journal of Korean society of Dental Hygiene
• /
• v.23 no.4
• /
• pp.303-309
• /
• 2023

Objectives: According to the Korea Education Development Institute, the college admission quota is expected to exceed the number of high school graduates, leading to an anticipated expansion in the gap between them. This paper aims to conduct an empirical analysis of the variables previously studied, with a specific focus on the admission competition rate for the department of dental hygiene. Methods: The research methodology is the multiple linear regression analysis. The research data contains the structured data from academy information, and the web-based unstructured data collected over the past 3 years. Results: After conducting the analysis, it was newly discovered that the university's online recognition and its location in the metropolitan area were statistically significant factors influencing the admission competition rate for the department of dental hygiene. Conclusions: The findings of this study are expected to be helpful in formulating admission strategies for universities to attract new students and identifying the factors that influence student attraction.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.6
• /
• pp.460-464
• /
• 2000

Extracellular polymeric substances (EPS) are believed to play a role in the binding and formation of microbial flocs. However, the precise role is not well known. Sludge settling characteristics and the carbohydrate to protein ratio in EPS were tested with various airflow rates in this study. Sludge was collected from three modified sequencing batch reactors (SBRs), which were operated at 16$\^{C}$ with an airflow rate of 0.8L/min, 3L/min and 6L/min, respectively. During the operation, the reactor operated at an airflow rate of 0.8L/min showed sludge volume index (SVI) of 80 to 90ml/g and a constant ratio of carbohydrate to protein in the EPS, while a significant increase in the SVI was seen in the other reactors. Sludge bulking increased the amount of carbohydrate in the EPS, while kept protein almost constant in the airflow rate of 3L/min ad 6L/min. Surface charge also increased with increases in the carbohydrate to protein ratio in the EPS, which weakens the attraction between the EPS and multivalent cations. The ratio of carbohydrate to protein in the EPS was tween the EPS and multivalent cations. The ratio of carbohydrate to protein in the EPS was inferred to be essential for bioflocculation.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2473-2479
• /
• 2013

The kinetics of the radical-polar molecule reaction $CH_3+HBr{\rightarrow}CH_4+Br$ has been studied at temperatures between 150 and 1000 K using classical dynamics procedures. Potential energy surfaces constructed using analytical forms of inter- and intramolecular interaction energies show a shallow well and barrier in the entrance channel, which affect the collision dynamics at low temperatures. Different collision models are used to distinguish the reaction occurring at low- and high-temperature regions. The reaction proceeds rapidly via a complex-mode mechanism below room temperature showing strong negative temperature dependence, where the effects of molecular attraction, H-atom tunneling and recrossing of collision complexes are found to be important. The temperature dependence of the rate constant between 400 and 1000 K is positive, the values increasing in accordance with the increase of the mean speed of collision. The rate constant varies from $7.6{\times}10^{-12}$ at 150 K to $3.7{\times}10^{-12}$ at 1000 K via a minimum value of $2.5{\times}10^{-12}\;cm^3\;molecule^{-1}\;s^{-1}$ at 400 K.

• Korean journal of applied entomology
• /
• v.54 no.4
• /
• pp.311-316
• /
• 2015

This study was performed to ascertain the potential of egg plant for use as a trap plant to attract Bemisia tabaci adults compared to that of tomato. Choice tests were conducted to compare the preference of B. tabaci adults to horseweed, egg-plant, cucumber, and tomato. B. tabaci adults were found to be more sensitive to visual cues than to odor cues, and they preferred the egg-plant and cucumber to horseweed. The attraction rates of the egg-plant and cucumber to B. tabaci adults were 82.3% and 82.5% respectively, compared to that of tomato. Because egg-plants are easier to manage compared to cucumber, we excluded cucumber from subsequent experiment. The attraction rate of egg-plant to B. tabaci adults was >90% when the height of egg-plant was equal or more than that of the tomato plant.