• Journal of Surface Science and Engineering
• /
• v.57 no.2
• /
• pp.98-104
• /
• 2024

In order to overcome the urban heat island effect, highly functional paint is attracting attention as a promising means by shielding heat on the structure (building) surface. When a paint was prepared containing nano-sized silica particles, the heat-insulating performance was relatively higher than that of paints with other sizes. In addition, developed paints showed enhanced properties such as chemical resistance and abrasion resistance test because of the presence of nano-sized silica included in functional paint.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.1
• /
• pp.19-26
• /
• 2024

Recently, separation membranes have been applied to fields such as water supply, sewage treatment, gray water reuse, and air pollution control. Chemical cleaning technology is attracting attention among the methods of reusing these expensive separation membranes. It was found that the separation membrane could be regenerated using chemical cleaning. Specifically, it was found that the use time of the separation membranes regenerated by chemical cleaning was sustainable for more than 1,700 hours. Additionally, it was found that the flux recovery ratio after chemical cleaning was maintained at least 60%. In addition, the flux recovery ratio of HYDREX 4710, an organic membrane cleaner, and 4703, an inorganic membrane cleaner, was 76% and 62%, respectively, showing the highest flux recovery ratio among the chemicals used. Considering that the target raw water of this study is biological secondary treatment water, it was suggested that chemical cleaning could be actively used to regenerate separation membranes in future water treatment.

• International journal of advanced smart convergence
• /
• v.13 no.1
• /
• pp.48-56
• /
• 2024

The application of artificial intelligence (AI) is becoming increasingly important to coping with air pollution. AI is effective in coping with it in various ways including air pollution forecasting, monitoring, and control, which is attracting a lot of attention. This attention has created high need for analyzing studies on AI and air pollution. To contribute for satisfying it, this study performed bibliometric analyses on the studies on AI and air pollution from 2012 to 2022 using the Web of Science database. This study analyzed them in various aspects such as the trend in the number of articles, the trend in the number of citations, the top 10 countries of origin, the top 10 research organizations, the top 10 research funding agencies, the top 10 journals, the top 10 articles in terms of total citations, and the distribution by languages. This study not only reports the bibliometric analysis results but also reveals the eight distinct features in the research steam in studies on AI and air pollution, identified from the bibliometric analysis results. They are expected to make a useful contribution for understanding the research stream in AI and air pollution.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2676-2682
• /
• 2024

Despite its remarkable socioeconomic development, South Korea underperforms in terms of female labor force participation and women in leadership positions. As women appear to avoid nuclear engineering, we aim to evaluate its relative performance in attracting women to its labor force compared to other college majors. Using college-major level information from 2000, we test whether the female faculty share in nuclear engineering is lower than its counterparts. Although nuclear engineering has one of the lowest female faculty shares, its share exceeds that of agricultural science, business and economics, chemical engineering, chemistry, civil engineering, and industrial engineering once we properly control for gender composition among students and other compounding factors. In other words, once female students major in nuclear engineering, they are less likely to leave their fields compared to their counterparts in other disciplines. This result implies that if the nuclear engineering field aims to attract more women to its workforce, it is important to target them from the early stage of their careers.

• Journal of the Korean Physical Society
• /
• v.81
• /
• pp.516-524
• /
• 2022

Recently, three-dimensional (3D) nano-processing technology that can increase design freedom and space efficiency of devices has been being rapidly developed, and is highly expected to provide a key path for the development of next-generation optical devices. This technology has shown a high possibility of success in realizing the future devices, but still are facing many challenges in the popularization and practical application. In particular, the ability of quickly, precisely, and stably fabricating complex 3D nanostructures composed of many individual elements is strongly demanded. In recent years, the so-called four-dimensional (4D) nanofabrication technology is attracting attention. The 4D nanofabrication is achieved by applying an external force to manufactured two-dimensional nanostructures, inducing deformation in time, and then precisely transforming them into 3D nanostructures. The 4D nanofabrication technology with excellent flexibility, versatility, functionality, and reconfiguration properties provides a new paradigm enabling effectively control the mechanical, electrical, and optical properties of existing materials. In this review, we examine the conventional methods for fabricating 3D nanostructures, and then investigate 4D nanofabrication technology in detail.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.2
• /
• pp.90-96
• /
• 1997

Until now the research was usually related in the fishing basket for crab charybdis japonica, concentrated one's effort to modification on the construction, shape, number of entrance of fishing basket etc.. But there's not make good used to the basically habit, shelter behavior of crab. etc., and was not fundamentally modified to the ability attracting the crab on net fishing basket. In this paper, first of all investigated to the behavior of crab in water tank and then two types modification fishing baskets could the increasing to ability attracting of crab on fishing basket were designed from the result obtained in this experiment and compared with modificated net fishing basket by Kim.Go(1987.1990) at a field and tank experiment. The results obtained are summarized as follows : 1. Being the fishing baskets had dropped in the tank bottom, the touched rate and reacted rate of crab according the elapsed time agree with to experiment of Kim.Go(1987.1990)in the mainly. however, in case of plate type tangle net, the touched rate of crab increased for a short time and then decreased and the reacted rate increased in a hurry to show a maximum and then was established. 2. The beginning catch time of crab was shortest in the plate type tangle net than the any fishing baskets because it's immediately entangled if the crab was touched only a part of body on net and latest in the net fishing basket. 3. A distance of between the touched rate and the reacted rate curve were the most short, wide in the plate type tangle net. therefore, the ability attracting of crab was excellent than the any fishing baskets and in case of pipe type fishing baskets, between the 150mm and 250mm seemed not difference and showed a tendency to increasing against the net fishing baskets. 4. Pipe type fishing baskets seemed to become a good shelting place for the crab because it showed a tendency to stagnate at the inside in that. 5. The mean catch per pot of crab among the net fishing basket, pipe type fishing baskets, plate type tangle net were highest in the pipe type fishing baskets than the net fishing basket and lowest plate type tangle net. Therefore it showed to difference against the tank experiment.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.4
• /
• pp.282-293
• /
• 2008

In order to develop the substitutive materials for natural baits of swimming crab pots, the attracting effects of swimming crab such as the preference of baits which were made of the by-products of marine and stock raising through the water tank experiments and fishing experiments. On the investigation of mean entrapped catch number to the pot by the baits after putting the 4 kinds of baits, mackerel(M), mackerel with grinded mackerel s internals($MM_I$), mackerel with tuna s internals$MM_I$) and makerel with grinded krill(MK) each in one pot by turns, $MM_I$ and MK were entrapped mean 3.9(13.0%) and they were a little more comparing to M, and $MT_I$ is least with mean 2.1(7.0%)(F=12.913, P < 0.05). Otherwise, on the preference investigation of swimming crabs by the baits after putting the 4 kinds of baits in the 4 pots each, M was entrapped mean 3.0(10%), but $MM_I$, $MT_I$ and MK were mean 1.2(4.0%), 1.0(3.3%) and 1.5(5.0%) each and they were only 30-50% of M(F=13.398, P < 0.05). On the preference investigation of swimming crabs by the 5 kinds of baits, mackerel(M), and krill(K), manila clam($M_C$), pig s fat($P_F$) and chicken s head($C_H$) which were used in substitutive baits, M was entrapped mean 3.2(10.7%), but K was about 50% of catch of M with mean 1.6(5.3%), and $M_C$, $P_F$ and $C_H$ were very few with mean 0.1-0.2(0.3-0.7%)(F=89.186, P < 0.05). On the preference investigation of swimming crabs by the pots which were put each the 3 kinds of baits, original krill(K), grinded krill with gluten and soybean oil cake($K_GGS$) and grinded krill with gluten, soybean oil cake and glycine($K_GGSG_L$) in the blue fluorescent hexahedral plastic bait cages(BF), and which were put the mackerel(M) in the non-fluorescent hexahedral red plastic bait cage($RF_N$), it was entrapped mean 3.0(10.0%) in the pot which was put the mackerel in the $RF_N$, and the same level in the pots which were put the K and $K_GGSG_L$ in the BF, but it was mean 2.0(6.7%) in the pots which was put the $K_GGS$ in BF and it was decreased by 30% of catch comparing to $RF_N$(F=3.750, P < 0.05). On the preference investigation of swimming crab by the pots which was put grinded tuna with gluten, soybean oil cake and glycine($T_IGSG_L$) in the blue fluorescent hexahedral plastic bait cage(BF), and which was put mackerel(M) in the nonfluorescent hexahedral red plastic bait cage($RF_N$), it was entrapped mean 3.3(11.0%) in the pot which was put mackerel in $RF_N$, and mean 2.7(9.0%) in the pot which was put $T_IGSG_L$ in BF and it was about 15% less comparing to use bait M(t=1.387, P < 0.05). As a results of fishing experiments, a plan for enhancing catching efficiency of $T_IGSG_L$ will be required because catching efficiency of $T_IGSG_L$, alternative bait, was half of fish catching efficiency of natural bait using mackerel. Fishing experiments were conducted 3 times using reinforced substitutive artificial bait that is reinforced attractive effect of $T_IGSG_L$ and composed of tuna intestine, grinded mackerel, gluten, soybean cake, glycine and alanine($T_IM_GGSG_LA$). Catching efficiency of $T_IM_GGSG_LA$ was about 80% of that of natural bait made of mackerel.

• International Commerce and Information Review
• /
• v.17 no.3
• /
• pp.299-322
• /
• 2015

Generally Container can be seperated from FCL and LCL. The LCL cargo can be evaluated as a cargo that makes it possible to attract a relatively stable volume and create added value. The aim of this study is to suggest improvement plan for atrracting LCL cargo in Pyeongtaek Port. In order to achieve the object of the study, The research structure is following. 1) analyzing a movement path of the LCL cargo occurring in Pan Yellow-Sea. 2) analyzing the problems to handle LCL cargoes in Pyeongtaek Port. The basic data for analyzing the movement path of LCL Cargoes utilize the data of the Customs Service. and the problems of LCL freight handled suggested from forwarder, carferry liners, and bonded warehouse companies by interview. In this study, We use Fuzzy-AHP as the methodology to analyze the importance of attracting major improvement for LCL shipments in Pyeongtaek Port. As the result, The expansion of inspection equipment and personnel was presented as the most important improvement too solve the clearance problems that is the most serious problems in Pyeongtaek Port. and The realization of incentive payments that local government pay for Profitability of related companies are needed.

• Journal of the Korean Regional Science Association
• /
• v.31 no.4
• /
• pp.47-69
• /
• 2015

The purpose of this study is to analyze regional spatial distribution and characteristics with the Talent Magnet Potential Index(TMPI), which is calculated through the extra-regional talent attracting environment(Magnet factors) and intra-regional talent cultivating environment(Incubator factors) of each region. As a result, Seoul, Daejeon, Gyeonggi, Ulsan etc. ranked highest, and regions developed in knowledge-based services, R&D capability, and manufacturing turned out to have a higher TMPI. The regions were categorized into 4 types, and the regional type analysis showed that the cumulative effects of Type I(Talent comparative advantage type) and Type III(Talent absolute shortage type) contribute to widening the economic gap among these regions. In addition, although the metropolitan based Type IV(intra-regional talent dependant type) had excellent talent training capability, there seemed to be an outflow of talent into Type I or Type II(extra-regional talent dependant type). This paper has done a correlation analysis to test the validity of the TMPI. As a result, the correlation between talent by type and TMPI turned out to be very high. The correlation coefficient with 2T turned out to have the highest correlation, showing that tolerance contributes a much greater deal to talent attracting and training than expected. Finally, based on the main analytical results, implications for talent attraction & training policy projects and 7 improvement plans have been proposed.

• International Commerce and Information Review
• /
• v.13 no.2
• /
• pp.235-258
• /
• 2011

Our country is operating designating the 6 free economic zones. Korea has designated fixed areas as economic special zones and made their management and living conditions equivalent to the level of advanced countries they are to support. One-Stop Service for the administrative demands that require the assistance at a national level in foreign investment, education, finance etc. However, these free economic zones are modified by regional development projects rather than inviting foreign capital. For the free economic zones to be operated effectively, the following methods should be followed: first, active management support activities should be constructed for the purpose of attracting foreign capital, second, a business model specifically designed to attract foreign capital should be implemented, third and finally, the independence and professionalism for the free economic zones should be strengthened.