• Korean Journal of Plant Resources
• /
• v.10 no.2
• /
• pp.183-187
• /
• 1997

This study was carried out to find the growth characteristics and content of sarsasapogenin in different plant parts of Anemarrhena asphodeloides Bunge. Five native-cultivars were collected and evaluated for several agronomic traits. The collected native-cultivars were classified into two seed-attached peduncle and vegetative propagation types. Seed-attached peduncle lines were predominance of growth traits than vegetative propagation. For the content of sarsasapogenin in each part was investigated, BuOH extarct of 'timo' was developed on silica gel 60G plate using elution solvent($CHC1_2$: Methyl ethyl Ketone : EtOH = 11 : 2 : 0.5). The developed plate were examined using Dual Wavelength Zig - Zag using. Content of sarsasapogenin in main root and lateral root were respectively 1.67mg/g and 1.31mg/g.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.2
• /
• pp.87-95
• /
• 2004

For the slope stability and revegetation of retaining wall, Eco-Stone was built beside a newly constructed road in August, 2002. Eco-Stone blocks were constructed in 4 different combinations of irrigation and soil types. Within the Eco-Stone, planted were 6 species such as Forsythia koreana, Rhododendron mucronulatum, Spiraea prunifolia var. simpliciflora, Rhododendron sp. Euonymus japonica, and Aster koraiensis. Shoot growth was greater on common soils than at a better soil treatment for Forsythia koreana(P<0.01) and Spiraea prunifolia var. simpliciflora(P<0.05), while there were no significant differences for the other species. Biomass increment of the planted species also did not show significant differences between irrigation types, except Rhododendron sp. and Aster koraiensis of which biomass was higher under irrigation than at no irrigation for common soils. Most of the planted individuals were alive, showing survival ratio of 90~97% with no significant differences among treatment blocks. These results imply that the Eco-Stone can be used economically for slope stability and revegetation instead of concrete blocks, without a specific soil and irrigation requirement.

• Journal of the Korean Ceramic Society
• /
• v.29 no.7
• /
• pp.539-543
• /
• 1992

The continuous growth method was developed for Mn-Zn Ferrite single crystals. It is a new process that the polycrystalline MnχZn1-χFe2O4 raw materials are supplied continuously from the powder feeding system to the crucible heated by R.F. induction and melted in the crucible, and after the single crystals seed is attached to crucible's hole, the crystals are pulled downward with rotation. Growing the crystals by using the growth method different from the conventional Bridgman or Floating Zone method, we defined the factors having effect on the crystal growing through the pre-experiments. They are temperature distribution in the crucible, melt velocity according to its height, wettability between the crucible's bottom and melt. Therefore, Mn-Zn Ferrite single crystals were to be grown by attaining the appropriate melt height in the crucible, powder feeding rate, temperature gradient between the crucible and interface, crystal growing speed, and this method was confirmed to have possibility for single crystal growing.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.8 s.227
• /
• pp.996-1003
• /
• 2004

The bubble motion during nucleate boiling in a microchannel is investigated by numerically solving the equations governing conservation of mass, momentum and energy in the liquid and vapor phases. The liquid-vapor interface is tracked by a level set method which is modified to include the effects of phase change at the interface and contact angle at the wall. Also, the evaporative heat flux from the thin liquid film that forms underneath a growing bubble attached to the wall is incorporated in the analysis. Based on the numerical results, the effects of channel size, contact angle, wall superheat and waiting period on the bubble growth and heat transfer in a microchannel are quantified.

• Journal of the Korean Society of Safety
• /
• v.6 no.3
• /
• pp.21-26
• /
• 1991

In this study, a crack closure behavior of Al-alloy 5052-H38 was investigated. The fatigue test was performed by the four-point bending test under the contast amplitude load. Stress ratio R was changed from-1.0 to 0.5. To mcasure the fatigue crack opening point, the graph of load vs. subtracted displacement by computer program was obtained from the X - Y plotter. In order to gain the displacement data, a strain gage was attached at the back surface against the notched side. Uslng the conception of crack closure and influence of on crack growth rate a model for crack growth rate is developed for Al-alloy 5052-H38.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.292-295
• /
• 2015

The effect of Ligand Binding energy in quantum rod (CdS/ZnS) plays a critical role in anisotropic growth. As mimicking large chain of ligands and using the head of the chain, I plan to bind the quantum rod and ligands so that it can grow well consequently. So the ultimate goal of this study is on how ligand binding can affect the growth of this quantum rod. There are preferred surfaces between the quantum rod and ligands, and we empirically know that ligands which bind the quantum rod; Phosphoric oxide (PO), Phosphoric acid(PA), Carboxylic acid(CA), Trimethylamine(TMA), have strong tendency to be attached on the surfaces of CdS/ZnS; ($11{\bar{2}}0$), ($10{\bar{1}}0$), ($000{\bar{1}}$), (0001). I virtually bond the surface and the ligands, and calculated the ligand binding energy after optimizing their structure, utilizing EDISON simulator. After all, I figured out how they are linked each other and how the quantum rod grows.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.285-288
• /
• 1998

Ultrasonic signal characteristics related with the growth of electrical trees in epoxy resin are examined under 67[Hz] ac voltage application along with a CCD camera and PD current method. The ultrasonic sensor with a resonant frequency of 200[Hz] supported by a mechanical spring is attached directly to the lower-side of plane electrode. The magnitude of Partial discharge and count rate of ultrasonic signals have been measured according to the tree growth from a needle tip in an epoxy sample.

• Journal of Institute of Convergence Technology
• /
• v.4 no.1
• /
• pp.1-4
• /
• 2014

This study was experimentally performed to show the growth characteristics of one specified plant with various liquids, which can be purchased easily. To do that, this study measured the number of leaves attached to the plant sample and the height of liquids everyday during almost 15 days on summer season in the laboratory room. From the experiments, we revealed that the remained number of leaves can be related with the liquid height.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.4
• /
• pp.249-260
• /
• 1998

To understand the attachment of micro algae and their subsequent growths on artificial surfaces immersed in seawater, the relationship between attachment of diatoms on the immersed artificial substrates and species pool in the surrounding water was investigated. We used acryl slides for the study of diatom attachment and examined the surrounding water samples collected in Incheon Harbour from July 1995 to February 1997. Variations of species composition and abundances by exposure time in seawater were investigated during the early phase of biofilm formation on various substrates, e.g. glass, acryl, titanium, copper and antifouling paint-treated slides. Immigration rates of diatoms to acryl slides during spring and winter were significantly correlated with the abundance of benthic diatoms in surrounding water ($r^2$=0.78, p<0.01, n=42), suggesting that immigration rates were affected by variations of benthic diatom abundances in surrounding water. Immigration coefficient of monoraphid diatoms was 5 times higher than that of biraphid diatoms, but relative abundance of monoraphid diatoms was 3 times lower than that of biraphid diatoms on acryl slides in spring. In winter, immigration coefficient and relative abundance of centric diatoms were higher compared to other raphe forms. These results suggest that the attachment of diatoms seems to be caused by the abundance and immigration coefficients of benthic diatoms in surrounding water. Pennate diatoms predominantly attached to all artificial surfaces throughout all experimental periods. Interestingly, centric diatoms predominantly attached to all artificial surfaces in winter. Hantzschia virgata, Licmophora abbreviata and Melosira nummuloides appeared dominantly on antifouling paint-treated slides, probably being tolerant of the antifouling paint. During incubations, the abundance of attached diatoms increased exponentially on glass, titanium and acryl slides with exposure time. The maximum abundance was highest on glass slide, followed by acryl, titanium, copper and antifouling paint-treated slides. The growth rates of attached diatom community on all artificial surfaces were higher at temperature of $24-25^{\circ}C$ than that of $2-3^{\circ}C$. The growth rate of attached diatoms on glass slide was generally higher compared to other slides during the study period. Dominant morphotypes of observed species with exposure time in seawater were prostrate form Amphora coffeaeformis, fan shape Synedra tabulata, stalk type Licmophora paradoxa and chain type M. nummuloides. A micro-succession in the attached microalgal community was observed. The composition of dominant species seems to be the result of species-specific response to gradually limited space with development of microalgal film.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.10
• /
• pp.471-480
• /
• 2020

In Indonesia, micro-, small- and medium-sized enterprises (MSMEs) are introduced to increase income by providing many easier jobs to improve economic growth. They have also been reported to be generally supportive of the local industry. The government policies on investment and expenditure have the ability to promote MSMEs and economic growth. Therefore, this research was conducted to analyze the theoretical background and empirical study to investigate government's role to promote MSMEs growth in Indonesia. The secondary data after the 2008 global financial crisis recorded quarterly from 2009 to 2019 Q3 were analyzed using the Ordinary Least Square (OLS) regression model. The results showed government expenditure has a positive and significant contribution to small- and medium-sized enterprises, but the effect was not significant for micro-businesses. Meanwhile, the investment sector was discovered to have a positive and significant effect on MSMEs. The policy implications of the Indonesian government are expected to focus on its expenditure's role as the most important factor for "social-economic protection of the community" through micro-enterprises, which are numerous and more attached to the real community economic-social life. Therefore, the existence of micro-businesses is very helpful for the lower classes despite their high vulnerability to crisis.