• The Transactions of the Korean Institute of Electrical Engineers B
• /
• 제53권1호
• /
• pp.55-62
• /
• 2004

This paper presents a new hybrid control method of asymmetrical half-bridge converter (AHBC) with low voltage stresses of the diodes. The proposed new control scheme can observe variation of secondary diode voltage stresses by using feedback of the input voltage and then decide the control portions, which are symmetrical control and asymmetrical control. Therefore, the proposed control scheme has many advantages such as a low rated voltage of the secondary diodes and low conduction loss according to the low voltage drop. The principle of the proposed control scheme is explained in detail and its validity is verifiedthrough simulated and experimental results

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.221-223
• /
• 2003

This paper presents a new hybrid control method of asymmetrical/symmetrical half-bridge converter (AHBC/SHBC) with low voltage stress of the diodes. The proposed new control scheme is executed by using feedback of the input voltage and then can decide operation of the converter is divided into two ranges, which are asymmetrical control and symmetrical control, So the proposed control scheme has many advantages such as a low rated voltage of the secondary diodes, and low conduction loss according to the low voltage drop. The proposed control scheme is verified by simulated results.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1416-1418
• /
• 2005

This paper presents a new hybrid control method of asymmetrical half-bridge converter(AHBC) with low voltage stresses of the diodes and interleaved PFC(power factor correction). The proposed new control scheme can observe variation of secondary diodes voltage stresses by variation of duty ratio and then decide the control portions which are asymmetrical control and PFM(Pulse Frequency Modulation). Therefore, the proposed control scheme has many advantages such as a low rated voltage of the secondary diodes, low conduction loss according to the low voltage drop and wide zvs range by load variation. Through simulation results, the validity of the proposed control scheme is demonstrated.

• Journal of the Korean Statistical Society
• /
• 제14권2호
• /
• pp.76-86
• /
• 1985

Shewhart X-chart, which is most widely used in practice, is shown to be inappropriate for the cases where the process distribution is one-sided asymmetrical, and thus some nonparametric Shewhart type charts are developed instead. These schemes may be applied usefully when there is not enough information in determining the process distribution. The average run lengths are obtained to compare the efficiency of control charts for various shifts of the location parameter and for some typical one-sided asymmetrical distributions.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.257-260
• /
• 2005

Three different current-mode control schemes, peak current-mode control, charge control, and average current-mode control, are investigated for applications to asymmetrical half-bridge dc-to-dc converters. The principles, implementation, and performance of the three control schemes are compared in an attempt to identify the irrespective merits and limitations. Design examples for feedback compensations are given for the three control schemes. A 50 W experimental asymmetrical half-bridge dc-to-dc converter was used to experimentally verify the theoretical results of the paper.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.128-130
• /
• 2005

본 논문은 ZVS asymmetrical half-bridge converter 에서 무부하시 전력소모 분석과 감소 방안에 대한 연구이다. Asymmetrical half-bridge converter는 영전압 스위칭을 통해 효율 증가가 가능하고, 낮은 EMI 발생의 장점으로 인해 최근 많이 사용되고 있다. 그러나 최근 이슈가 되고 있는 대기전력 소모의 관점에서는 기존의 hard switching converter에 비해 오히려 손실이 증가한다. 이는 공진형 컨버터의 무부하시 동작이 기생전류에 의한 도통손실이 크기 때문이다. 따라서 본 논문에서는 이를 개선 할 수 있는 방법을 제시하고 70W급의 실험용 SMPS의 제작을 통해 제안된 방법의 타당성을 검증한다.

• Journal of the Korean Society for Precision Engineering
• /
• 제14권8호
• /
• pp.65-72
• /
• 1997

An asymmetrical cross-coupled compensator to improve the contouring performance is proposed. This is a refinement of the structure suggested by Koren. The position loop is closed with a proportional controller as in the uncoupled system. An additional input term proportional to the component of the contour error along the corresponding axis is included. The controller gains are chosen to give an appropriate frequency response and an optimum range for the damping ratio. The effectiveness of the proposed controller is studied by means of digital simulations of the dynamics of the drives and the controller for 4 types of command trajectories: straight line contour, cornering contour, circular contour, elliptic contour. Substantial improvement in contouring performance is obtained for a range of contouring conditions.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.337-340
• /
• 2003

This paper presented practical details about control-loop design and dynamic analysis for a peak current-mode controlled asymmetrical half-bridge(ASHB) do-to-dc converter, Graphical loop gain method is used to design the feedback compensation and analyze the closed-loop performance of ASHB converter. The results of the control design and closed-loop analysis are validated by experiments on a prototype converter.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1184-1186
• /
• 2003

In this paper, a charge controlled asymmetrical half-bridge (ASHB) dc-to-dc converter is presented. For ASHB do-to-dc converter, the peak current-mode control was found to be problematic primarily due to the oscillatory behavior of the current feedback signal. To resolve this problem, a charge control method is applied to the ASHB do-to-dc converter. A 50W prototype ASHB dc-to-dc converter was built, and successfully tested.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.510-513
• /
• 2001

In this paper, an application of asymmetrical duty control method to a boost input type active clamp DC-DC converter is discussed. In order to verify the discussed results, a 50W prototype converter is built and is tested. Through the experimental results an asymmetrical controlled boost input type active clamp converter is validated.