• Wind and Structures
• /
• 제8권4호
• /
• pp.283-294
• /
• 2005

This paper describes the work of the Working Group on wind pressure coefficients on low-rise structures, one of the groups set up by the International Association of Wind Engineering in 1999. General aspects of wind loading on low-rise structures are summarized. The definition, derivation and codification of loading coefficients is described. Comparisons of pressure coefficients on low rise structures are made between a selection of wind loading standards. Recommendations for consistency and for the harmonization of these coefficients are given.

• 지역연구
• /
• 제12권2호
• /
• pp.1-19
• /
• 1996

The purpose of this paper is to evaluate the accuracy of input coefficients which are usually estimated by various non-survey methods. The resulting analysis showed that there were considerable differences employed. One of the interesting findings was that the simple LQ method was shown to be better then the other non-survey methods with respect to the degree of accuracy. And from a sensitivity analysis which was to show the effect of changes in input coefficients on the level of production by industry, an increase of 10% in the value of input coefficient (machinary and equipment setor) resulted up to 500billion Won in GRP for the case region. Therfore one of the implications which we can derive from the resulting analysis is that it necessary to pay attention to the key coefficients first to save out time and money, while retaining a certain level of accuracy. One thing to be noted, however, is that the key coefficients but the total effects which are calculated through the Leontief inverse matrices. Therfore to enhance the accuracty of input coefficients estimated by nonsurvey methods it is required to handle the relevant setoral data more carefully or to employ semi-survey method in part.

• 한국문헌정보학회지
• /
• 제37권4호
• /
• pp.178-198
• /
• 2003

상호정보량은 용어간 유사도 산출을 비롯한 다양한 분야에서 연관성 척도로 사용되어왔다. 그러나 값의 범위가 일정하지 않으며 지나치게 저빈도인 경우를 선호하는 경향이 제한점으로 지적되고 있다. 이런 점을 보완하기 위해서 상호정보량을 정규화하는 상대적 상호정보량 계수를 제안하였다. 제안된 계수의 특성을 알아본 다음, 세 실험집단을 대상으로 전역적(global) 질의확장 검색을 수행한 결과 검색 성능을 향상시킬 수 있었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2009년도 학술발표회 초록집
• /
• pp.1306-1310
• /
• 2009

The roughness coefficients were estimated by the Manning's equation for the measured stage and flow velocity of Bocheong stream basin in Kum river. The relationships between the estimated roughness coefficients and the geomorphologic factors were formulated by the linear, logarithmic, exponential and power type function, thereafter correlation equations were presented. The correlation analysis was performed between the measured stream length and the basin area of Bocheong stream basin by the linear, logarithmic, exponential and power type function, and correlation equation for the stream length was given. The roughness coefficient has strong correlationship with stream slope, but low correlation coefficients with stream length and basin area. For the correlationship with the roughness coefficients and the stream slope, the logarithmic type function has the smallest correlation coefficient, on the other hand, the exponential type function has the largest correlation coefficient. For the relationship between the stream length and the basin area, the correlation coefficient of the logarithmic type function shows the smallest value, linear type function shows the largest value.

• 펄프종이기술
• /
• 제38권3호
• /
• pp.1-6
• /
• 2006

The increasing use of newsprints in the media and an advertisement have brought the needs to improve the printing quality of the advance full-color newspaper. The printability coefficients used in this research such as Ymax for the density and Tollenaar's density smoothness constant value $\ulcorner$m$\lrcorner$ were introduced early in Europe and have been in use to control printing quality. In order to improve printing quality of domestic full-color newsprints, those printability coefficients could be used to control printing quality. This study was carried out to measure the printability coefficients of domestic full-color newspapers. Four kinds of domestic newspapers and two kinds of newspaper printing inks were tested by IGT printability tester. The printed density smoothness coefficient $\ulcorner$m$\lrcorner$ value showed good results when the samples have low porosity and roughness. The printability coefficients obtained are expected to be useful to the korean newspaper printing industry.

• Journal of Radiation Protection and Research
• /
• 제42권3호
• /
• pp.154-157
• /
• 2017

Background: Shielding properties of compound or mixture is presented in terms of mass attenuation coefficients using Monte Carlo simulation. Mass attenuation coefficients of cement, gypsum and the mixture of gypsum and $PbCO_3$ has been investigated using monte carlo MCNPX. Materials and Methods: The mass attenuation coefficients of cement, gypsum and the mixture of gypsum and $PbCO_3$ were calculated for photon energies 365.5, 661.6, 1,173.2, and 1,332.5 keV energies. Results and Discussion: The simulated values of mass attenuation coefficients were compared avaialable experimental results, theoretical values by XCOM and found good comparability of the results. Conclusion: Standard simulation geometry used in the present investigation would be very useful for various types of sample for shielding and dosimetry applications.

• Water Engineering Research
• /
• 제1권1호
• /
• pp.75-81
• /
• 2000

The bragg reflection of obliquely incident monochromatic water waves propagating over a sinusoidally varying topography is theoretically investigated in this study. The eigenfunction expansion method is first employed to calculate reflection coefficients of water waves due to depth changes. A reasonable agreement is observed. Obtained reflection coefficients of normally incident waves are compared with laboratory measurements. Reflection coefficients of obliquely incident waves are then calculated. The wavenumber providing the Bragg reflection agrees well with analytical predictions.

• Asian-Australasian Journal of Animal Sciences
• /
• 제3권3호
• /
• pp.155-159
• /
• 1990

The growth of lean from nine wholesale cuts in relation to the total lean weight in carcass side were evaluated with three allometric equations for 18 Najdi male camels slaughtered at 8, 16 and 26 months of age. The allometric growth coefficients indicated that as the camels grew, weights of lean form brisket and flank cuts increased relatively more rapidly than the total lean in carcass side (${\beta}$ >1.1) and that weights of lean from wholesale shoulder and rump cuts increased relatively less rapidly (${\beta}$ <.9) than the total lean weight from carcass side. The growth coefficients for the lean in the thoracic limb and pelvic limb showed a dorsoventral rise in the growth impetus, with coefficients for the thoracic limb correspondingly higher than those of pelvic limb. The growth coefficients for the lean from shoulder, rib, flank and leg cuts increased (p<.01) with increased weight of total lean in carcass side, whereas it decreased with increased total lean weight in carcass side for the lean in neck, brisket, plate, loin and rump cuts. At a constant weight of total lean in carcass side, older camels had larger coefficients for lean in neck, brisket, rump, flank and leg cuts, but had smaller coefficients for lean in shoulder, rib, plate and loin cuts.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권10호
• /
• pp.1542-1549
• /
• 2018

Objective: Because lactation periods in dairy cows lengthen with increasing total milk production, it is important to predict individual productivities after 305 days in milk (DIM) to determine the optimal lactation period. We therefore examined whether the random regression (RR) coefficient from 306 to 450 DIM (M2) can be predicted from those during the first 305 DIM (M1) by using a RR model. Methods: We analyzed test-day milk records from 85,690 Holstein cows in their first lactations and 131,727 cows in their later (second to fifth) lactations. Data in M1 and M2 were analyzed separately by using different single-trait RR animal models. We then performed a multiple regression analysis of the RR coefficients of M2 on those of M1 during the first and later lactations. Results: The first-order Legendre polynomials were practical covariates of RR for the milk yields of M2. All RR coefficients for the additive genetic (AG) effect and the intercept for the permanent environmental (PE) effect of M2 had moderate to strong correlations with the intercept for the AG effect of M1. The coefficients of determination for multiple regression of the combined intercepts for the AG and PE effects of M2 on the coefficients for the AG effect of M1 were moderate to high. The daily milk yields of M2 predicted by using the RR coefficients for the AG effect of M1 were highly correlated with those obtained by using the coefficients of M2. Conclusion: Milk production after 305 DIM can be predicted by using the RR coefficient estimates of the AG effect during the first 305 DIM.

• Communications for Statistical Applications and Methods
• /
• 제12권3호
• /
• pp.683-696
• /
• 2005

The results of using principal coordinates prior to cluster analysis are investigated on the samples from multiple binary outcomes. The retrieval ability of the known clustering algorithm is significantly improved by using principal coordinates instead of using the distance directly transformed from four association coefficients for multiple binary variables.