• KIEAE Journal
• /
• v.15 no.1
• /
• pp.29-43
• /
• 2015

Shared housing for elderly people, where several elderly people live together, gains attention as a means to prevent the lonely death of elderly people and continuously maintain their social relations. The purpose of this study is to compare the characteristics planned through rural and urban areas-residing elderly people's participation in the shared housing spatial composition by area. This study conducted a small scale workshop panel method that targeted small group, but through which extensive information can be acquired, as a qualitative method. This study targeted 16 elderly people aged 65 and over living in rented apartments in rural and urban areas by dividing them two groups by area, namely into four groups. A total of 12 workshop sessions were held with three sessions at a time through a certain time interval. As a result of the study, the elderly people showed positive responses to the shared housing, irrelevant of area. As time went on, the workshop panel method's effect was revealed through consolidated positive attitude and agreement of different opinions. The shared housing for elderly people is valuable as a residential alternative for elderly people, and differentiated supply of the shared housing for elderly people, according to residential area's characteristics, is suggested.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.3
• /
• pp.260-268
• /
• 2005

This paper proposes an improved investment pnonty decision method of facilities considering the reliability of distribution networks. The proposed method decides an investment order of the facilities combining, by fuzzy rules, the investment priority decision by KEPCO and that by reliability evaluation indices. The reliability evaluation indices are SAIFI (System Average Interruption Frequency Index) and SAIDI (System Average Interruption Duration Index). The reliability analysis method of distribution networks applied in this paper utilizes the analytic method, where the used reliability data is the historical data of KEPCO. Particularly, we assumed that the failure rate increases as the equipment ages. To verify the performance of the proposed method, we applied it with the planned projects to reinforce the weak electrical facilities in KEPCO in 2004. The evaluation result showed that, under a limited budget, the reliability of KEPCO in the Busan region using the proposed method could be enhanced if used rather than the conventional method typically in place. Therefore, the results verify that the proposed method can be efficiently used in the actual priorities method for investing in the electrical facilities.

• Journal of Korean Home Economics Education Association
• /
• v.12 no.1
• /
• pp.47-58
• /
• 2000

The purpose of this study is to investigate the effects of cooperative learning method on student achievement and attitude in Home Economics. and that what sort of effectiveness be existed between the two groups. Homogeneous & Heterogeneous one in achievement. A junior middle school in Kwangju was served for the study. Setting two groups: One is for cooperative learning and other for traditional learning. Two classes were provided with cooperative learning method. while one class with traditional learning method. Two hours of a week were devoted for the experiment. and it was also planned to be lasted six weeks from the third of June. 1998. until the 13th of July. 1998. The results are as follows: 1) Student achievement from cooperative learning method showed a little higher than those from traditional learning method. 2) Cooperative learning method was more effective than traditional learning method. mental attitude toward school. lessons and teachers were more higher than those the traditional learning method. 3) The group of Heterogeneous members was higher than the group of Homogeneous members in their student achievement. 4) It is noticeable that two groups under cooperative learning method. however showed some difference when each of them is placed in different organization. The group of Heterogeneous members was more affirmative attitude toward school. lessons and teachers than the one Homogeneous members.

• International Journal of Railway
• /
• v.9 no.1
• /
• pp.21-26
• /
• 2016

When excavation under existing structure is planned for a new construction project, the underpinning method is one of the most applicable construction methods. This study introduces a new modified underpinning method which is applied to construct a new subway line in Seoul Metropolitan. The new subway line was designed to pass underneath the existing subway line. Existing subway line carries about 2 million passengers daily, which is 33% of total passengers using subway in Seoul, and is the only circulation line in Seoul. Subway trains are passing 540 times through this section in a day. By applying a new underpinning method, the subway box structure of line is exposed 54m in the air supported by bearing piles. The proposed method was carefully monitored using heavy instrumentation system during construction. This study proposed and verified the application of the modified underpinning method, which can reduce construction period by 1.5 times and the construction cost by 1.2 times comparing with conventional method. The importance of considering construction sequence is investigated and verified by analyzed data non-considering construction sequence. The unexpected heaving which can bring up a dangerous situation for train running stability were measured, so this study shows that the upward movement has to be analyzed in designing process. As the use of underground space increases, the proposed method can be a good example of underground development.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.3030-3038
• /
• 2023

Nowadays, mobile robots have been used to search for uncontrolled radioactive source in indoor environments to avoid radiation exposure for technicians. However, in the indoor environments, especially in the presence of obstacles, how to make the robots with limited sensing capabilities automatically search for the radioactive source remains a major challenge. Also, the source search efficiency of robots needs to be further improved to meet practical scenarios such as limited exploration time. This paper proposes an automatic source search strategy, abbreviated as ACA: the location of source is estimated by a convolutional neural network (CNN), and the path is planned by the A-star algorithm. First, the search area is represented as an occupancy grid map. Then, the radiation dose distribution of the radioactive source in the occupancy grid map is obtained by Monte Carlo (MC) method simulation, and multiple sets of radiation data are collected through the eight neighborhood self-avoiding random walk (ENSAW) algorithm as the radiation data set. Further, the radiation data set is fed into the designed CNN architecture to train the network model in advance. When the searcher enters the search area where the radioactive source exists, the location of source is estimated by the network model and the search path is planned by the A-star algorithm, and this process is iterated continuously until the searcher reaches the location of radioactive source. The experimental results show that the average number of radiometric measurements and the average number of moving steps of the ACA algorithm are only 2.1% and 33.2% of those of the gradient search (GS) algorithm in the indoor environment without obstacles. In the indoor environment shielded by concrete walls, the GS algorithm fails to search for the source, while the ACA algorithm successfully searches for the source with fewer moving steps and sparse radiometric data.

• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.80-87
• /
• 2004

During excavation work for the construction of a highway bridge in a limestone area in Korea, several cavities were found, and construction work was stopped temporarily. Cavities under the bridge piers might seriously threaten the safety of the planned bridge, because they could lead to excessive subsidence and differential settlement of the pier foundations. In order to establish a method for reinforcement of the pier foundations, borehole radar reflection and tomography surveys were carried out, to locate cavities under the planned pier locations and to determine their sizes where they exist. Since travel time data from the crosshole radar survey showed anisotropy, we applied an anisotropic tomography inversion algorithm assuming heterogeneous elliptic anisotropy, in order to reconstruct three kinds of tomograms: tomograms of maximum and minimum velocities, and of the direction of the symmetry axis. The distribution of maximum velocity matched core logging results better than that of the minimum velocity. The degree of anisotropy, defined by the normalized difference between maximum and minimum velocities, was helpful in deciding whether an anomalous zone in a tomogram was a cavity or not. By careful examination of borehole radar reflection and tomography images, the spatial distributions of cavities were delineated, and most of them were interpreted as being filled with clay and/or water. All the interpretation results implied that two faults imaged clearly by a DC resistivity survey were among the most important factors controlling the groundwater movement in the survey area, and therefore were closely related to the development of cavities. The method of reinforcement of the pier foundations was based on the interpretation results, and the results were confirmed when construction work was resumed.

• Journal of Convergence for Information Technology
• /
• v.11 no.12
• /
• pp.211-220
• /
• 2021

In this study, we intend to investigate the effect of cosmetic companies' planning actions for green marketing campaigns on their intention to participate and their actions. To this end, a survey was conducted and a total of 186 questionnaires were analyzed. The main results are as follows. The three factors of planned behavior, attitude, subjective norm, and perceived behavior control, all had a significant effect on participation intention and participation behavior, and subjective norm was found to have the greatest influence. In addition, it was found that participation intention had a significant effect on participation behavior. Therefore, in order to activate the green marketing campaign, it is necessary to study the marketing method that can inform the people around the participation method, recommend the participation in the campaign, and recommend it.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.6
• /
• pp.895-906
• /
• 2000

The study planned to testify the accuracy of the 3D scanner through analyzing the human body measurement method and the evaluation of flare skirt with 3D scanner. The results obtained from this study were as follows; First, the results of measurement for the dress form and human body by 3D scanner were more accurate than one or two dimensional measurement method. Second, from the results of the scan for the flare skirts as worn the human body, we could obtain very accurate horizontal section map. Third, in the clothing ergonomics viewpoint, the accuracy of the 3D scanner was very excellent and its utility was higher than that of the moir photography method. Therefore, the 3D scanner is very useful for the human body measurement and the wearing evaluation. In a nutshell, this study illustrates that we have to develop a program of automatic human body measurement system which will enhance the application of the 3D scanner.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1996.11a
• /
• pp.5-9
• /
• 1996

In foreign country such as U.S.A and Japan, considerable research has been done regarding the spread of smoke in room of fire involvement by using computer. But, in our country it has not been. So, this paper presents a detailed qualitative description of phenomena which occures during typical fire scenarios through numerical analysis. This research, in the view of field model, is focused on finding out the smoke movement and temperature distribution. And it is planned to analyze governing equation including smoke diffusion equation by numerical analysis with finite volume method and non-staggered grid system. The SIMPLE method for pressure-velocity couple and power-law scheme for convection terms are used. It shows that a plume is formed, hot plume is formed, hot plume gases impinge on the ceiling and they spread across it. then, it eventually reaches the bounding walls of the enclosure. It takes 60s for smoke to fill the enclosure.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.20-23
• /
• 1996

This paper deals with the flexible manipulator with rotational and translational degrees of freedom, which has an arm of time-varying length with the prismatic joint. The tracking control problem of the flexible manipulator is considered. First we design the controller of the 2-type robust servo system based on the finite horizon optimal control theory for the trajectory planned as a discontinuous velocity. Next, to reduce the tracking error, we use the method of the dynamic programming and of modifying the reference trajectory in time coordinate. The simulation results show that the dynamic modeling is adequate and that the asymptotic stabilization of the flexible manipulator is preserved in spite of nonlinear terms. The PTP control error has been reduced to zero completely, and the trajectory tracking errors are reduced sufficiently by the proposed control method.