• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.1
• /
• pp.23-28
• /
• 2005

Lactic acid is a green chemical that can be used as a raw material for biodegradable polymer. To produce lactic acid through microbial fermentation, we previously screened a novel lactic acid bacterium. In this work, we optimized lactic acid fermentation using a newly isolated and homofermentative lactic acid bacterium. The optimum medium components were found to be glucose, yeast extract, $(NH_4)_{2}HPO_4,\;and\;MnSO_4$. The optimum pH and temperature for a batch culture of Lactobacillus sp. RKY2 was found to be 6.0 and $36^{\circ}C$, respectively. Under the optimized culture conditions, the maximum lactic acid concentration (153.9 g/L) was obtained from 200 g/L of glucose and 15 g/L of yeast extract, and maximum lactic acid productivity ($6.21\;gL^{-1}h^{-1}$) was obtained from 100 g/L of glucose and 20 g/L of yeast extract. In all cases, the lactic acid yields were found to be above 0.91 g/g. This article provides the optimized conditions for a batch culture of Lactobacillus sp. RKY2, which resulted in highest productivity of lactic acid.

• The Korean Journal of Food & Health Convergence
• /
• v.5 no.6
• /
• pp.17-21
• /
• 2019

This article addresses issues related to environmental pollution.Particular attention is paid to the prevention of environmental pollution by livestock waste, which prompted the creation of closed ecological and biotechnical systems as environmentally closed production structures that can fit into the equilibrium system of the environment with minimal damage to it. An energy-saving and environmental protection technology for the processing and disposal of livestock waste with a maximum coefficient of energy transfer to livestock products has been developed, which consists in a combined treatment of waste in three stages, by transferring waste from one technological module to another, which makes it possible to completely utilize mineral substances in waste. The focus is on vermicultivation, microalgae cultivation and anaerobic fermentation in a bioenergy plant. To increase the productivity of growing microalgae, the authors proposed a deep type cultivator with submerged movable light sources.The technological parameters of the bioenergy installation for waste treatment are determined. An energy-saving and environmental-friendly technology has been developed for processing The main contribution of the study is the development of energy-saving and environmental technology for the processing and disposal of livestock waste with a maximum coefficient of energy transfer to livestock products.

• Journal of Animal Science and Technology
• /
• v.51 no.6
• /
• pp.471-484
• /
• 2009

The peri-implantation period in mammals is critical with respect to survival of the conceptus (embryo/fetus and associated extraembryonic membranes) and establishment of pregnancy. During this period of pregnancy, reciprocal communication between ovary, conceptus, and endometrium is required for successful implantation and placentation. At this time, interferon tau (IFNT) is synthesized and secreted by the mononuclear trophectodermal cells of the conceptus between days 10 and 21~25. The actions of IFNT to signal pregnancy recognition and induce or increase expression of IFNT-stimulated genes (ISGs), such as ISG15 and OAS, are mediated by the Type I IFN signal transduction pathway. This article reviews the history, signaling pathways of IFNT and the uterine expression of several IFNT-stimulated genes during the peri-implantation period. Collectively, these newly identified genes are believed to be critical to unraveling the mechanism(s) of reciprocal fetal-maternal interactions required for successful implantation and pregnancy.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.27 no.4
• /
• pp.16-44
• /
• 2014

Objective : To search the trend of studying thread-embedding therapy in Korean medicine academia up to now and to expand the range of using thread-embedding therapy in the future, this study was designed. Methods : Using search portal sites the following; http://oasis.kiom.re.kr, http://www.riss.re.kr, collected 37 articles and devided those three parts and classificated those into four subsection as follows; total analysis, original article, case report. Results : The number of articles are 8 review articles, 14 original articles, 15 case reports. In the year 2013, 14 articles were published and ranked highest(37.8%). The journal of acupuncture & moxibustion medicine society ranked highest(40.5%). 5 persons ranked highest(32.4%) in number of author. Facial beauty care ranked highest(21.6%) in clssification of disease. Remedy item ranked highest(50.0%) in classification of subjects of 8 review articles. No more than 25 persons ranked highest(66.7%) and 6~12months of treatment period ranked highest(33.3%) in 14 original articles. Conclusions : Thread-embedding therapy is considered very useful on various part of Korean medicine clinic. We need to expand application scope of thread-embedding therapy in the future.

• International Commerce and Information Review
• /
• v.13 no.3
• /
• pp.97-118
• /
• 2011

The Korea-Chile FTA talks began in December 1999 and concluded in October 2002, with official endorsement in April 2004. This FTA of a first for Korea, went into effect on April 1 in 2004. The purpose of this study to measure the Chile product evaluation in the Korean consumer after Korea-Chile FTA signed. The major result of article can be summarized as the follows: This paper investigates the determinants of 'product attitude', 'quality recognition', 'price recognition', 'use safety', 'use convenience', and 'design(appearance)'. There are 500 sended samples and 487 returns, 476 of them are analyzed for a entry competitiveness. In the analysis result of the article, The first, multiple regression result shows that the Chile goods evaluation are positively affected by the 'product attitude', 'price recognition', 'use safety', 'use convenience', and 'design(appearance)'. However, The 'quality recognition' factor do not affect in Chile goods evaluation.

• Journal of Elementary Mathematics Education in Korea
• /
• v.17 no.1
• /
• pp.129-142
• /
• 2013

The purpose of this study was to investigate the typical characteristics of mathematics education of Japan. In order to achieve this goal, we focused the journal 'Arithmetic Education' from 2007 to 2011. This journal has published by the Japan Society of Mathematical Education and 6 issues each year. A total of 133 articles related with mathematics education were analyzed. The typical characteristics of Japan's research for mathematics education were as follows: The number of single author of article were 98 cases (74%), and those of two co-authors were 21 cases (16%). There are some unusual research topic for mathematics education such as 'combined class'. 'cultural pluralism' and 'mathematics learning disabled children'. The articles 'statistical methods related to educational evaluation', 'statistical analysis for educational evaluation' and 'the relationship between number and quantity on the quaternion number' are very interesting results to the readers who know the basics of statistics and algebra. We may find many researcher who majored pure mathematics in the University of Educations in Korea. So we hope that they may write the paper which combine the pure mathematics and mathematics education. The education survey conducted by the policy is actually very meaningful. If the researcher can connect these surveys to the field of education, then the readers can see a nice paper in the journal of elementary mathematics education in Korea. Finally, it is very difficult to find that counterstatement paper for the results of the other's.

• Toxicological Research
• /
• v.21 no.3
• /
• pp.249-253
• /
• 2005

The present study was carried out to investigate the skin irritation potential of lemon grass essential oil in rabbits. A volume of 0.5 ml of test article was applied to intact and abraded skins, respectively, for 24 h in 6 healthy male New Zealand White rabbits. Parameters measured during 72 h observation period were mortality, clinical signs, body weight changes, and local irritation. All rabbits showed severe edema at both 24 h and 72 h after the application of test article. These animals also showed very slight to severe erythema and/or slight eschar formation at both 24 h and 72 h. The edema and erythema induced by lemon grass essential oil were recovered on day 7 of additional 11-day recovery period, but the eschar formation was not recovered at the end of recovery period. On the other hands, there were no treatment-related adverse effects on clinical sign, body weight and gross finding in rabbits. Based on these results, it was concluded that a single dermal application of the undiluted lemon grass essential oil caused very slight to severe edema, erythema and eschar formation in rabbits and showed a primary irritation index score of 5.63 indicating severe irritation. The results of this study strongly suggest that lemon grass essential oil should be used with care and in highly diluted forms especially when directly applied to the skin.

• Fashion & Textile Research Journal
• /
• v.21 no.6
• /
• pp.697-707
• /
• 2019

This review paper deals with materials, classification, and a current article investigation on smart textile sensors for wearable vital signs monitoring (WVSM). Smart textile sensors can lose electrical conductivity during vital signs monitoring when applying them to clothing. Because they should have to endure severe conditions (bending, folding, and distortion) when wearing. Imparting electrical conductivity for application is a critical consideration when manufacturing smart textile sensors. Smart textile sensors fabricate by utilizing electro-conductive materials such as metals, allotrope of carbon, and intrinsically conductive polymers (ICPs). It classifies as performance level, fabric structure, intrinsic/extrinsic modification, and sensing mechanism. The classification of smart textile sensors by sensing mechanism includes pressure/force sensors, strain sensors, electrodes, optical sensors, biosensors, and temperature/humidity sensors. In the previous study, pressure/force sensors perform well despite the small capacitance changes of 1-2 pF. Strain sensors work reliably at 1 ㏀/cm or lower. Electrodes require an electrical resistance of less than 10 Ω/cm. Optical sensors using plastic optical fibers (POF) coupled with light sources need light in-coupling efficiency values that are over 40%. Biosensors can quantify by wicking rate and/or colorimetry as the reactivity between the bioreceptor and transducer. Temperature/humidity sensors require actuating triggers that show the flap opening of shape memory polymer or with a color-changing time of thermochromic pigment lower than 17 seconds.

• Journal of Society of Preventive Korean Medicine
• /
• v.6 no.1
• /
• pp.36-50
• /
• 2002

Health industry, a knowledge based high value-added industry, is being considered as a strategic area for the 21C and many advanced countries are making every endeavors for the promotion of health industry along with information technology, new materials, and mechatronics. Korean health industry, however, has been excluded from the governmental supports as well as bound by strict regulation so far, and there is a significant gap in technology compared with advanced countries. In 21C, technology is the main factor of national competitiveness and that is why the role of R&D institutes are so important in the high level of competition to cope with the technology protection policies of advanced countries. In this article, with Directory of Korean R&D Institutes published by Korea Industry Technology Association, I reviewed the trends of R&D institute of health industry. Main findings of the research can be summarized as follows. The portion of health industry R&D institute is 3.6% of total R&D institute but the amount of R&D investment is over than 5% This means health industry are knowledge based and R&D intensified industry, meanwhile the variations of same industry R&D institutes of health industry is huge in R&D investments and other activities. Regional distributions of health industry institutes show some kind of different patterns in each industry areas. Medical devices and Medical informatics's preference of metropolitan region are distinguished with other industry areas. Many of the institutes are located in same site of it's company rather than operating separate building for R&D specific uses. It is better for transforming ideas to products and close cooperation of research body with product lines, but it is a handicap for networking and communicating with other research institutions too. It takes 18.4yrs for bearing R&D institute on the average. For a long times 'copy products' or 'me too products' policies were easy way to maintain business entities. But recently, it is recognized that research activities are essential component of sustaining it's own business firms. This means technology itself is leading power of corporation itself in the high level of competition.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.287-296
• /
• 2009

This is written to present basic shot information among iron clubs and information of weight shift, because previous study conducted on all clubs was rut enough. This article is about shot analysis of iron club 3,4,5,6,7,8,9 and weight movement, conducted on four skilled golf players and four students who major in golf and are less than three years. The analysis of long and short irons showed statistically meaningful different results for all the participants but iron clubs of 3,4,5 didn't in head speed and ball speed. The skilled group showed better results in head speed, ball speed and direction, Launch angle than the unskilled group. In weight shift movement analysis, the unskilled group moved, on back swing top, their more weight(65.36%) but the skilled group was on their left foot (70.21%)when clubs were on impact moment. It shows that the skilled group put on power more efficiently by moving weight.