• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.446-452
• /
• 2020

In this paper, we propose a energy-saving LED module using K-band microwave motion detecting sensor. To oscillate K-band microwave signal, An oscillator using a hairpin-type microstrip resonator was designed to increase stability and make fabrication easier. To radiate the microwave signal, a two-channel(TX/RX) patch antenna arrays was developed. Wilkinson power divider and ring hybrid mixer were developed and applied to obtain Doppler shift from the received signal. Shield cans were installed to protect the stability of the signals and unwanted external noise. The proposed motion detection sensor was mounted on a demonstration LED module and the energy saving performance through pre-test was verified.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.137-142
• /
• 2013

Direction of arrival is estimating for desire signal direction among received signal on antenna in spatial. In this paper, we were an estimation a receiving signal direction of arrival using multi beam forming in radar. We proposed, by signal direction of arrival estimation method, an algorithm which combine spatial correlation matrix weight value and beam steering algorithm in this paper. Through simulation, we were analysis a performance to compare general algorithm and proposal algorithm. In direction of arrival estimation, proposed algorithm is effectivity to decrease processing time because it is not doing an eigen decomposition. We showed that proposal algorithm improve more target estimation than general algorithm.

• ETRI Journal
• /
• v.20 no.2
• /
• pp.133-148
• /
• 1998

The objective of this paper is to present an adaptive algorithm for computing the weight vector which provides a beam pattern having its maximum gain along the direction of the mobile target signal source in the presence of interfering signals within a cell. The conjugate gradient method (CGM) is modified in such a way that the suboptimal weight vector is produced with the computational load of O(16N), which has been found to be small enough for the real-time processing of signals in most land mobile communications with the digital signal processor (DSP) off the shelf, where N denotes the number of antenna elements of the array. The adaptive procedure proposed in this paper is applied to code division multiple access (CDMA) mobile communication system to show its excellent performance in terms of signal to interference plus noise ratio (SINR), bit error rate (BER), and capacity, which are enhanced by about 7 dB, ${\frac{1}{100}}$ times, and 7 times, respectively, when the number of antenna elements is 6 and the processing gain is 20 dB.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.43.1-43.1
• /
• 2010

A novel method to characterize the topology of the early-universe intergalactic medium during the epoch of cosmic reionization is presented. The 21-cm radiation background from high redshift is analyzed through calculation of the 2-dimensional (2D) genus. The radiative transfer of hydrogen-ionizing photons and ionization-rate equations are calculated in a suite of numerical simulations under various input parameters. The 2D genus is calculated from the mock 21-cm images of high-redshift universe. We construct the 2D genus curve by varying the threshold differential brightness temperature, and compare this to the 2D genus curve of the underlying density field. We find that (1) the 2D genus curve reflects the evolutionary track of cosmic reionization and (2) the 2D genus curve can discriminate between certain reionization scenarios and thus indirectly probe the properties of radiation-sources. Choosing the right beam shape of a radio antenna is found crucial for this analysis. Square Kilometer Array (SKA) is found to be a suitable apparatus for this analysis in terms of sensitivity, even though some deterioration of the data for this purpose is unavoidable under the planned size of the antenna core.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.347-350
• /
• 2007

Adaptive arrays have been proposed as an effective means of mitigating Multiple Access Interference (MAI) and improving the performance of existing and future wireless communication systems. In this paper, we apply the analytical method proposed to analyse the theoretical Mean Bit Error Rate (BER) of an uncoded IS-95 based CDMA system with an array antenna at the BS in a Ricean fading environment. We present a modified expression for the Signal to Interference plus Noise (SINR) ratio as a function of the number of users, number of antennas and noise levels. We also verify the analytical results by means of simulations by considering different user and channel scenarios.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.6
• /
• pp.989-1005
• /
• 2010

Cooperative diversity is a technique with which a virtual multiple antenna array is established among the single antenna users of the wireless network to realize space diversity. Signal space diversity (SSD) is a bandwidth-efficient diversity technique, which uses constellation rotation and interleaving techniques to achieve diversity gain. A new cooperative diversity scheme with rotated constellations (RCCD) is proposed in this paper. In this scheme, data are modulated by using a rotated constellation, and the source and the relays transmit different components of the modulated symbols. Since any one of the components contains full information of the symbols, the destination can obtain multiple signals conveying the same information from different users. In this way, space diversity is achieved. The RCCD scheme inherits the advantage of SSD - being bandwidth-efficient but without the delay problem of SSD brought by interleaving. The symbol error rate of the RCCD scheme is analyzed and simulated. The analysis and simulation results show that the RCCD scheme can achieve full diversity order of two when the inter-user channel is good enough, and, with the same bandwidth efficiency, has a better performance than amplify-and-forward and detect-and-forward methods.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.6
• /
• pp.26-34
• /
• 2010

The mutual coupling of a pair of microstrip patch antennas on a finite grounded dielectric substrate is influenced by the diffracted field of surface waves from the edges of a substrate. The effective dielectric constant of a grounded dielectric substrate determines the distance between the antenna center and the edge of a substrate to obtain the minimum mutual coupling between a pair of microstrip patch antennas. The optimum substrate size with the minimum mutual coupling is easily calculated using the image method. The optimum substrate sizes using the linage method are in good agreement with the results obtained by the full wave simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.709-715
• /
• 2002

In this paper, a novel low profile dual feeding microstrip antennas with microstrip and H-shaped aperture feeding are proposed to achieve high isolation and easy feeding, and the validity of the proposed antennas is demonstrated experimentally. In the proposed single and 1$\times$4 array antenna, the measured isolations are less than -49 dB and -48 dB, impedance bandwidths are 4 % at 12.5 GHz and 2.1 % at 14.25 GHz for the VSWR<1.5 in both antennas and maximum gains are 8.25 dBi and 14.2 dBi.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.3
• /
• pp.216-221
• /
• 2013

In this paper, wireless channel characteristics of massive MIMO system is analyzed by comparing angular spread, cross polarization discrimination(XPD) and delay spread of dual polarized 4 and 128 transmit array antenna systems, by using 3D rat-tracing simulator, Wireless Insite in microcell environments. The analysis shows that increasing the number of transmit antennas results in the smaller angular spread and delay spread, and the higher value of XPD.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.945-948
• /
• 2016

Recent premium smartphones commonly employ a metal frame and this trend is currently spreading over mid-range smartphones. However, the metal frame becomes a good coupling path of electromagnetic noises emitted from digital components in smartphones and then increases radio-frequency interference(RFI) to RF antennas located at top and bottom sides of smartphones. This paper proposed a metal frame with EBG(Electromagnetic Band Gap) structure to reduce the noise coupling to antenna by suppressing surface wave on the metal frame. By simulation, it is confirmed that the proposed metal frame with $7{\times}6$ mushroom-type EBG array pattern with multi-via can reduce the noise coupling to RF antenna by about 20 dB.