• Journal of environmental and Sanitary engineering
• /
• v.24 no.1
• /
• pp.25-32
• /
• 2009

The analyzed results of the heavy metal concentration of air and soil at the D iron-manufacturing company area were as follows; The concentration of $PM_{2.5}$ in the case area exceeded the air standard level in 3 seasons except summer. The $PM_{10}$ level was similar to the standard level, which was similar to the standard level, which was $50{\mu}g/m^3$. The Pb concentration of air in the case area was $0.13{\mu}g/m^3$, which was slightly higher than $0.11{\mu}g/m^3$ in the control area. The concentration of Cd and Cr were higher in the control area. The heavy metal (Pb) concentration of soil in the case area was $10.7{\mu}g/m^3$, which was higher than that of the control area. For these results, it is necessary for the D iron-manufacturing company area to consider a counter plan for dusts and are duction plan for the heavy metal (Pb).

• Journal of Digital Convergence
• /
• v.13 no.6
• /
• pp.297-305
• /
• 2015

Forest area was applied as health promotion place for resident. Korea Forest Service set the term of "forest healing" based on the application of forest area as health promotion, which multidisciplinary approach in forest policy, and construct the "healing forest" for the healing space. Handicapped was excluded from the forest healing service as healing forest was located in the point away from urban area. The standard of healing forest size was difficult to set as urban forest area was fragmented. This study conducted on adequate standard of healing forest size in urban region. This study surveyed the laws related to the outdoor recreation place, and the walking range of the handicapped (elders, disabilities). The results were deduced with interrelationship between two factors(forest policy, human walking range). Healing forest size was not departmentalized for urban area compared with the standard of similar outdoor space (tourism complex, urban parks). Healing forest size was changed from 50ha to 25ha in national forest, from 30ha to 15ha in private forest considered with walking range of handicapped. This study contributes the evidence as the standard of healing forest size for health promotion in urban resident.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.1
• /
• pp.36-42
• /
• 2007

A low-power compact driver for multistandard physical layer is presented. The proposed driver achieves low power and small area through the voltage-mode driver with trans-impedance configuration and the novel hybrid driver,. In the voltage-mode driver, a trans-impedance configuration alleviates the problem of limited common-mode range of error amplifiers and the area and power overhead due to pre-amplifier. For a standard with extended output swing, only current sources are added in parallel with the voltage-mode driver, which is named a 'hybrid driver'. The hybrid architecture not only increases output swing but reduces overall driver area. The overall driver occupies $0.14mm^2$. Power consumptions under 3.3-V supply are 24.5 mW for the voltage-mode driver and 44.5 mW for the hybrid driver.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.348-351
• /
• 2000

In order to enact the technical standard of RF(Radio Frequency) in domestic, this paper analyzes the trends and the technical specifications of high performance radio local area network, for example HIPERLAN(Europe), U-Nll(U.S.A), broadband mobile access system(Japan). The contents of this paper are helpful to make a rule for the desirable national technical standard of high performance radio local area network.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.63-70
• /
• 2019

The subject of the simultaneous measuring system of base pattern and deposition pattern is a new research topic on a defect inspection of OLED. In this paper, we propose a new OLED inspection method that simultaneously measures standard and deposition pattern images. This method reduces unnecessary processes and tac time during OLED inspection. For an additional reduction of the tac time during pattern measurement, the ROI was configured to measure only in the designated ROI area instead of measuring the entire area of an image. During the ROI set-up, the value of effective deposition pattern area is included so that if the deposition pattern is out of the ROI zone, it would be treated as a defect before measuring the size and center point of the pattern. As a result, the tac time and inspection process could be shortened. The proposed method also could be applied to the OLED manufacturing process. Production of OLED could be increased by reducing tac time and inspection process.

• Journal of Navigation and Port Research
• /
• v.36 no.2
• /
• pp.105-112
• /
• 2012

In order to improve the existing S-57 standard, International Hydrographic Organization(IHO) has developed S-100 standard, a Universal Hydrographic Data Model(UHDM) expanded from ISO 19100 series standard to hydrographic area, and is in the process of its implementation. International Maritime Organization(IMO) has established CMDS based on e-Navigation strategy data standard as International Association of Lighthouse Authorities(IALA) established IHDM based on aids to navigation data standard and each data standard is linked with the S-100 standard. Fundamental concept and core principles of S-100 standard is suitable not only for the development of a wide range of hydrographic data and service production standard, including the next generation ENC, but also the development of product specification of non-hydrographic area. This study has examined the operation principle of S-100 standard and analyzed its implementation process as e-Navigation data in relation with ENC. It also noted the utilization of S-100 standard based e-Navigation and its potential effect via examining the development cases of S-100 standard-based product specification, such as nautical publication, ship reporting and pilot request, digital routing guide, tide and water level transmission and other important data cases of e-Navigation field.

• Spatial Information Research
• /
• v.20 no.2
• /
• pp.45-57
• /
• 2012

Recently, local governments in Korea are promoting the rapid development of marine for delineating jurisdictional sea area. The importance of a maritime boundary has being emphasized, as jurisdictional sea area disputes among local governments have been increasing. The absence of the delineating standard of maritime boundary has become a source of contention between neighborhood local governments. So the delineating standard of maritime boundary in Korea will be required. The purpose of this study is to derive an improvement plan for the scientific delimitation standard of maritime boundary by analyzing "A hydrographic survey guideline for confirmation of maritime boundary". The results of this study are as follows. Firstly, we defined the concept of the delimitation standard of maritime boundary. Secondly, we set the boundary, factors and processes of the delineating standard of maritime boundary through classifying them in detail. Lastly, we suggested the makeup of a conflict adjustment committee for preventing jurisdictional sea area disputes among local governments.

• Journal of Navigation and Port Research
• /
• v.43 no.2
• /
• pp.93-100
• /
• 2019

In 2001, about 20 years after the introduction of the standard buoys, the natural environment and maritime traffic flow changes in the waters near Korea and the necessity of improvement of the AtoN (Aids to Navigation) maintenance was suggested. The IALA provides guidelines for maintenance and management of AtoN, and Korea provides guidelines for the management and operation of standard buoys by means of the Enforcement on the AtoN laws. The objective of this study was to investigate the installation status and the repair status of the standard type buoys by sea area in order to improve the management and operation of the steel standard buoys. In addition, a survey was conducted on the improvement of the steel buoy fouling and the improvement of the lifting inspection cycle towards on the AtoN managers and producers of the representative authority by sea area. In the case of LL-26 (M) buoy type, the standard type buoy installation status of Korea in 2017 was 57.1%, and the LL-26 (M) type was 58.9% showing the highest repair rate. According to the results of the survey on buoys fouling, 51.2% were caused by the attachment of shellfish, and 43.2% were caused by bird feces. The results of the survey on the improvement of the regular buoy inspection cycle showed that the measures are to maintain the current inspection period of 2 years regardless of the characteristics of the sea area (water depth, inside and outside port, buoy size, etc.).

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.3 s.51
• /
• pp.726-733
• /
• 1995

This study was carried out to assess the present level of atmospheric metals. Five metals - lead, cadmium, chromium, manganese, vanadium - were checked on the industrial(Sasang) and residental area(Daeshindong) in the city of Pusan. Sampling period was the year of 1986, 1990 and 1994, and the sampling time was 2 days of each site. As the result of comparison with the atmospheric standard of ASHRAE(1980), the average concentrations of lead was above the standard, the average concentrations of chromium was around the standard, and the average concentrations of cadmium and vanadium was below the standard. The average concentrations of manganese was above the standard of industrial environment. And the average concentrations of five metals was higher in the industrial area than the residental area. The average concentrations of lead, cadmium and chromium showed the increase tendency by the year, and the average concentrations of vanadium showed no change, and the average concentrations of manganese showed the decrease tendency. As a result of correlation analysis, lead and cadmium(r=0.31), vanadium and manganese(r=0.24), vanadium and chromium(r=0.19) showed significance.

• Journal of Nutrition and Health
• /
• v.15 no.4
• /
• pp.290-300
• /
• 1982

The study deals with the empirical research on the condition of nutrient intake of low income class which be represented by urban slum and rural area, with the analysis of the factors which might influence on the prevalent condition of nutrient- intake. The method of the research was based on the spot-survey with questionaires. The result is that the levels of nutrient-intake are below the standard requirement level of nutrients in both of urban slum and rural area. The level of nutrient intake in urban slum lies in approximately 50% of the standard requirement level and 80% of the standard requirement level in rural area. The extent of malnutrition was explained in terms of the amount of calorie, protein, calcium and iron. More than half of the population in the community are below the standard requirement level of the nutrient- intake. The problem of malnutrition was serious in urban slum than in rural areas, which made a good contrast with the result of Peru study. Deficiency in calcium was most serious. The factor analysis of the prevalent condition of malnutrition in low class suggests that 1) The function of local market in supplying food is not so effective in the sense that the quality of the foods purchased id the local market is poor. 2) Low level of knowledge, the consequent ignorance and the indifference to the nutrition and the low income led to malnutrition. The level of income and the education were significantly correlated to the nutrient-intake.