• 한국분말재료학회지
• /
• 제17권5호
• /
• pp.379-384
• /
• 2010

In the present work, bismuth nanopowders with various particle size distributions were synthesized by controlling argon (Ar) gas flow rate and chamber pressure of a gas condensation (GC) apparatus. From the analyses of transmission electron microscopy (TEM) images and nitrogen gas adsorption results, it was found that as Ar gas flow rate increased, the specific surface area of bismuth increased and the average particles size decreased. On the other hand, as the chamber pressure increased, the specific surface area of bismuth decreased and the average particles size increased. The optimum gas flow rate and chamber pressure for the maximized electrochemical active surface area were determined to be 8 L/min and 50 torr, respectively. The bismuth nanopowders synthesized at the above condition exhibit 13.47 $m^2g^{-1}$ of specific surface area and 45.6 nm of average particles diameter.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.221-229
• /
• 1999

We examined the governing factors of fatigue limit in annealed and austempered ductile iron specimens machined micro hole(dia.<0.4mm) in rotary bending fatigue test. Also, the quantitative relationship between fatigue limit and maximum defect size in specimens was investigated. Artificial defect(micro-pit type, dia.<0.4mm) on specimen surface did not bring about an obvious reduction of fatigue limit in austempered ductile iton(ADI) as compared with annealed ductile iron. According to the investigation of ${\sqrt{area}}_c$ which is the critical defect size to crack initiation at artificial defect, ${\sqrt{area}}_c$ of ADI was larger than that of annealed ductile iron. This shows that the situation of crack initiation at artificial defect in ADI is more difficult in comparison with annealed ductile iron. Maximum defect size is one of the important parameters to predict fatigue limit. And, the quantitative relationship, between the fatigue limit ${\sigma}_{\omega}$ and the maximum defect size ${\sqrt{area}}_{max}$ can be expressed to ${\sigma}_{\omega}^n{\cdot}{\sqrt{area}}_{max}=C_2$ where, $C_2$ are constant. Moreover, it is possible to explain the difference in fatigue limit between, austempered and annealed ductile iron by introducing the parameter ${\delta}(=N_{sg}/N_{total})$in a plain spectimen.

• Journal of Welding and Joining
• /
• 제26권5호
• /
• pp.90-96
• /
• 2008

The objective of this paper is to investigate the effects of the laser power, the material thickness, comer angles, and the loop size on the formation of the comer in the cutting of Inconel 718 super-alloy sheet using high-power CW Nd: YAG laser. In order to investigate the influence of comer angles and loop sizes on the melted area and the formation of comer in the sharp comer, angular cutting tests and loop cutting tests were carried out. The results of the angular cutting tests were shown that the melted area is minimized and the melting mode is changed from nose melting in the thickness direction to the secondary melting induced by the attached dross when the comer angle is $90^{\circ}$. Through the results of loop cutting tests, the variation of the melted area and the comer shape in the sharp comer according to the loop size were examined. In addition, it was shown that a proper loop size is approximately 3 mm. The results of above experiments will be reflected on the knowledge base to generate optimal cutting path of the laser.

• 대한토목학회논문집
• /
• 제29권1A호
• /
• pp.95-100
• /
• 2009

본 연구에서는 신속개방형 포장 콘크리트의 적정배합비를 도출하기 위한 실험을 실시하였다. 콘크리트 타설 후 8시간 후 교통개방을 하기 위해 조강제 및 조강시멘트를 사용하였으며 조강제의 적정 혼입량을 결정하기 위해 예비실험을 실시하였다. 이를 바탕으로 시멘트 및 잔골재율을 변수로 공기량, 슬럼프 경시변화, 응결시험, 압축강도, 휨강도 시험을 실시하였다. 실험 결과 8시간 목표 압축강도 21 MPa, 휨강도 3.8 MPa를 만족하는 신속개방형 교통개방 포장 콘크리트의 적정배합비를 도출하였다.

• 복식
• /
• 제36권
• /
• pp.43-52
• /
• 1998

This study was to analyze properties of the foot form through a development figure of the surface area by factor analysis, cluster analysis, and reglation analysis. This study was performed 71 college women between 19 adn 23 years old residing in Pusan urban area. The result was as follows; 1. There are four factors selected by factor analysis. The 1st factor signifies the surface area of the toe. The 2nd factor signifies the surface area between Metatarsal circumfer-ence and Tarsal circumference. The 3rd factor signifies the surface area between Toe circumference and Metatarsal circumference. The 4th factor signifies the surface area between Heel-ankle circumference. 2. There are three clusters selected by fast cluster. Cluster 1 : The foot size, most parts of foot surface area and total foot surface area are relatively small to other clusters, but the surface area between Metatarsal circumference and Tarsal circumference is relatively large to other clusters. Cluster 2 : The foot size, all parts of foot surface area and total foot surface area are relatively large to other clusters as Cluster 1, but the surface area of the sole of the heel and the ankle is relatively large to other clusters. 3. Total surface area of the foot=-274.94+24.01* Foot lengh+9.28*Metatarsal circumference.

• 한국환경과학회지
• /
• 제22권3호
• /
• pp.347-358
• /
• 2013

The aerosol number concentration have measured with an aerodynamic particle sizer spectrometer(APS) at Gosan in Jeju Island, which is known as background area in Korea, from March 2010 to February 2011. The obtained results of asian dust events and non-asian dust period have been compared. The results show that the entire averaged aerosol number concentration from APS measurement during asian dust events and non-asian dust period are about 341 particles/$cm^3$ and 240 particles/$cm^3$, respectively. During asian dust events, the number concentration in small size ranges(${\leq}0.4{\mu}m$) are similar to non-asian dust period, however, those in large size ranges(${\geq}0.7{\mu}m$) are very higher than non-asian dust period. The contributions of the size resolved number concentration(23 channel in $0.25{\sim}10.0{\mu}m$) to total number concentration in that range are dramatically decreased with increased particle size. The contributions of smaller size ranges(${\leq}0.4{\mu}m$) during asian dust events are very low compared with non-asian dust period, on the other hand, those of larger size ranges(${\geq}0.4{\mu}m$) are higher than non-asian dust period. The number concentration in each size range are strongly correlated with the concentration in adjacent size range. And the total aerosol number concentration are depended on the number concentration in range of smaller than $0.58{\mu}m$ during non-asian dust period and asian dust events. On the other hand, $PM_{10}$ mass concentration has mainly affected with the number concentration in range of smaller than $1.0{\mu}m$ during non-asian dust period, however, during asian dust events, the mass concentration has mainly affected with the number concentration in range of $0.65{\sim}3.0{\mu}m$.

• The Korean Journal of Ecology
• /
• 제21권1호
• /
• pp.27-33
• /
• 1998

Arisaema robustum, which has the ability to change sex, was studied in a temperate broadleaf forest of Sanseong-ri, Joongbu-myeon, Gwangju-gun, Kyonggi Province, Korea. \ulcornerThe study, carried out from 1993 to 1997, focused on population dynamics energy budget among organs, size distribution, mortality, the relationships between sex and size, seed production and germination rate. In terms of energy budget among the organs, the ratio of aboveground to belowground biomass was 36.6 : 63.4 in non-female plants, and 81.4 : 18.6 in female plants. Also, in female plants, the ration of leaf to sexual organ biomass was 39.5 : 41.9. Therefore, the belowground ratio of female plants was lower than that of non-female plants. Plants were classified into 8 levels relative to the amount of leaf area by $100cm^2$. The rates of the smallest and the largest classes were 49% and 1%, respectively, and population distribution by size was relatively stable. The mortality averaged 13.1% per year and decreased in inverse proportion to leaf size (6.6% in the smallest and 0.0% in the largest size classes). Leaf areas were $64.1{\pm}48.5cm^2$ in non-flowering plants, $232.1{\pm}123.9cm^2$ in males and $444.8{\pm}153.9cm^2$ in females. The increase rates of leaf area per year varied from 1.9% in plants changing from female tomale, to 152.4% in plants changing from non-flowering to female. But plants which remained female for 2 years showed a decrease of 34.7%. >From this result, it is thought that the female plants invest more energy to reproduction than to vegetative organs. The correlation coefficient (CC) value between plant size and the number of seeds produced (0.55) was larger than the CC value between plant size and total seed weight (0.73). That is, the larger the plant size, the heavier the seed produced. The germination rate increased along with seed weight, and it was 95% in plants which were over 60mg fresh weight/seed.

• 한국주거학회논문집
• /
• 제13권5호
• /
• pp.89-99
• /
• 2002

The multifamily housing has various advantages in construction cost, land-use intensity. KRIHS(1997) recommended the proper scale of th multifamily housing as 800 households in constructability, 1,000 households in facility compactability, 500 households in social aspect. At the early planning stage of project, the size of the multiftmily housing has, until now, been maximizingly considered under the regulation on which has been emphasized at the building volume ratio, land area, etc., except for the expenditure during the maintenance stage. This paper aimed at providing the proper size of multifamily housing in aspect of area and household number with maintenance cost at the early stage of project. For these, it took 곧 average cost function which is made from the 3-rd quardratic form and analyzes the unit increasing rate of the average cost. It surveyed in nationwide focused on the central heating system using diesel and kerosene. The number of samples is 88 and items of management cost is 11. The results are as follows ; first, 3rd-order quadratic function is proper at explaining the cost variation, considering the multicollinearity and statistics. Second, the proper size of multifamily housing is recommended with 83,000 $m^2$ on management area, 820 or over the 2,630 household number in aspect of total management cost.

• 대한임상전기생리학회지
• /
• 제10권2호
• /
• pp.37-42
• /
• 2012

Purpose : This study is to examine the effect of electrode size during transcranial direct current stimulation on hand function. Methods : By randomly assigning 26 right hand dominant subjects to two groups (I: carbon rubber electrode / II: disposable circular self-adhesive electrodes) with 13 subjects in each group depending on the electrode size, a positive electrodeof transcranial direct current stimulation was placed on the primary motor area (C4) and a negative electrode was placed on the left primary motor area (C3) and the stimulation was applied for 20 minutes.Hand function assessment before and after transcranial direct current stimulation were measured with JTT (Jebsen-Taylor hand function test). Results : According to hand function assessment by JTT, there were no interactions on both hands, and statistically significant differences according to time appeared in the main effect test. Conclusion : Regardless of the electrode size, it appears that transcranial direct current stimulation on the primary motor area activated hand function affected.

• Transactions on Electrical and Electronic Materials
• /
• 제7권4호
• /
• pp.167-172
• /
• 2006

Submicron colloidal silica coated with ceria were prepared by mixing of silica and nano ceria particles and modified by hydrothermal reaction. The polishing efficiency of the ceria coated silica slurry was tested over oxide film on silicon wafer. By changing the polishing pressure in the range of $140{\sim}420g/cm^2$ with the ceria coated silica slurries in $100{\sim}300nm$, rates, WIWNU and friction force were measured. The removal rate was in the order of 200, 100, and 300 nm size silica coated with ceria. It was known that the smaller particle size gives the higher removal rate with higher contact area in Cu slurry. In the case of oxide film, the indentation volume as well as contact area gives effect on the removal rate depending on the size of abrasives. The indentation volume increase with the size of abrasive particles, which results to higher removal rate. The highest removal rate in 200 nm silica core coated with ceria is discussed as proper combination of indentation and contact area effect.