• Journal of Korean Society of Forest Science
• /
• v.61 no.1
• /
• pp.60-68
• /
• 1983

Ever since the day of pre-modernized society where the farming skill had been in the stagnant condition, the common farmwoodlands have been utilized in common (collectivelly) by villagers in order to harvest farmwoodlands and fuelwoods. Later, during the process of modernization, most of the common farmwoodlands were transferred into national or public forests by the administrative enforcement, but there were still various types of village (common) forests such as the common forests owned by joint owners, village block associations, village forest productive societies, Village Forestry Association(V.F.A.), and the national or public forests leased to V.F.A. As Village Forestry Association is organized with a few villages, each of common forests ow nod to the villages is obliged to be diversely controlled by other managers than the chief of V.F.A. Therefore, it is to be desired that the control of common forests should be under Gun Forestry Association Union. While the rate of the use of common forests for fuelwoods and cemetery has been considerably high, villagers wish to promote the timber forest establishment through the collective management by their improved farming skills and economical situations. In these present circumstances the village forest productive societies should be guided to work in closer cooperation with Gun Forestry Association Union. Since the management of common forests is still extensive, it still remains in the semi-management condition under which we can not find any management plan or measure to control forest damage. Especially the small area common forests should have appropriate size for the joint management. This will promote the forest productivity through the lease for reforestation of disposable national forests or public county forests and the contracts for profit sharing. Today owing to increasing forest value, frequent dispute has occurred on the common right telated to the village forests and rationalization of forest management has been disregarded. If a necessary measure were taken to control the dispute such as transferring the registeration right of ownership to the village forest productive society, the confidence of local inhabitants can be regained and the productivity of forests can be naturally increased.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.6
• /
• pp.469-477
• /
• 2009

Purpose: This study was performed to evaluate the effect of various graft materials used with a titanium cap on the ability of new bone formation in the rabbit calvarium. Materials and Methods: A total of 32 sites of artificial bony defects were prepared on the calvaria of sixteen rabbits by using a trephine bur 8 mm in diameter. Each rabbit had two defect sites. 0.2 mm deep grooves were formed on the calvaria of sixteen rabbits by using a trephine bur 8 mm in diameter for the fixation of a titanium cap. The treatments were performed respectively as follows: without any graft for the control group (n=8), autogenous iliac bone graft for experimental group 1 (n=8), alloplastic bone graft ($SynthoGraft^{(R)}$, USA) for experimental group 2 (n=8), and xenogenic bone graft ($NuOss^{(R)}$, USA) for experimental group 3 (n=8). After the treatments, a titanium cap (8 mm in diameter, 4 mm high, and 0.2 mm thick) was fixed into the groove. At the third and sixth postoperative weeks, rabbits in each group were sacrificed for histological analysis. Results: 1. In gross examination, the surgical sites showed no signs of inflammation or wound dehiscence, and semicircular-shaped bone remodeling was shown both in the experimental and control groups. 2. In histological analysis, the control group at the third week showed bone remodeling along the inner surface of the cap and at the contact region of the calvarium without any specific infiltration of inflammation tissue. Also, there was no soft tissue infiltration. Bone remodeling was observed around the grafted bone and along the inner surface of the titanium cap in experimental group 1, 2, and 3. 3. Histologically, all groups at the sixth week showed the increased area of bone remodeling and maturation compared to those at the third week. In experimental group 2, the grafted bone was partially absorbed by multi nucleated giant cells and new bone was formed by osteoblasts. In group 3, however, resorption of the grafted bone was not observed. 4. Autogenous bone at the third and sixth week showed the most powerful ability of new bone formation. The size of newly formed bone was in decreasing order by autogenous, alloplastic, and heterogenous bone graft. There was no statistically significant difference among autogenous, alloplastic, and heterogenous bones(p>0.05). Summary: This result suggests that autogenous bone is the best choice for new bone formation, but when autogenous bone graft is in limited availability, alloplastic and xenogenic bone graft also can be an alternative bone graft material to use with a suitably guided membrane.

• Journal of the Korean Geographical Society
• /
• v.40 no.2 s.107
• /
• pp.221-241
• /
• 2005

Land Use and Land Cover Changes (LUCC) occur over a wide range of space and time scales, and involve complex natural, socio-economic, and institutional processes. Therefore, modelling and predicting LUCC demands an understanding of how various measured properties behave when considered at different scales. Understanding spatial and temporal variability of driving forces and constraints on LUCC is central to understanding the scaling issues. This paper aims to 1) assess the heterogeneity of land cover change processes over the landscape in northern Ghana, where intensification of agricultural activities has been the dominant land cover change process during the past 15 years, 2) characterise dominant land cover change mechanisms for various spatial scales, and 3) identify the optimal spatial scale for LUCC modelling in a savanna landscape. A multivariate statistical method was first applied to identify land cover change intensity (LCCI), using four time-sequenced NDVI images derived from LANDSAT scenes. Three proxy land use change predictors: distance from roads, distance from surface water bodies, and a terrain characterisation index, were regressed against the LCCI using a multi-scale hierarchical adaptive model to identify scale dependency and spatial heterogeneity of LUCC processes. High spatial associations between the LCCI and land use change predictors were mostly limited to moving windows smaller than 10$\times$10km. With increasing window size, LUCC processes within the window tend to be too diverse to establish clear trends, because changes in one part of the window are compensated elsewhere. This results in a reduced correlation between LCCI and land use change predictors at a coarser spatial extent. The spatial coverage of 5-l0km is incidentally equivalent to a village or community area in the study region. In order to reduce spatial variability of land use change processes for regional or national level LUCC modelling, we suggest that the village level is the optimal spatial investigation unit in this savanna landscape.

• Journal of Korean Home Economics Education Association
• /
• v.16 no.3
• /
• pp.1-25
• /
• 2004

This study analyzes the external forms of the household textbooks and also the contents of them used at girls' middleㆍhigh schools during the period of Japanese ruling over Korea. To this end, 8 household textbooks published from 1928 to 1937 were analyzed. The results of the study are summarized as follows. 1. The household subject had become the one of the most important subjects to girl students as the practical uses were emphasized in educational area during the period. As a result. the classes of the household were the second in hours, following the class of Japanese (the national language) to girl students. 2. The contents of the household textbooks were intended to contain 'the modern' and 'the newest'. The students were also suggested to apply the contents of the textbooks to real home life. Many pictures, photos and illustrations were included in household textbooks to help students to understand the contents of the subject. 3. The purposes of the household class were the reformation of the living conditions and home economics. 4. The external characteristics of the household textbooks during the period were as follows. - Written in Japanese vertically and the size of the textbook was A5 (150/210) with pulp paper of good quality - The type style of the body of the textbooks was Ming-style type- The sequent order of the textbooks was the outer cover, the title page, pictorial, introduction, table of contents, the body, appendix and the back cover. 5. The household textbooks consisted of the first volume and the second volume. The first volume contained clothing and textiles, food and nutrition and housing. Taking care of the aged. nursing. child care, household economy and home management were included in the second volume. 6. The household textbooks were designed to make women the housewives.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.436-442
• /
• 2017

Fischer-Tropsch synthesis is the technology of converting a syngas (CO+$H_2$) derived from such as coal, natural gas and biomass into a hydrocarbon using a catalyst. The catalyst used in the Fischer-Tropsch synthesis consists of active metal, promoter and support. The types of these components and composition affect the reaction activity and product selectivity. In this study, we manufactured an iron catalyst using ${\gamma}-Al_2O_3/SiO_2$ mixed support (100/0 wt%, 75/25 wt%, 50/50 wt%, 25/75 wt%, 0/100 wt%) by an impregnation method to investigate how the composition of ${\gamma}-Al_2O_3/SiO_2$ mixed support effects on the reaction activity and product selectivity. The physical properties of catalyst were analyzed by $N_2$ physical adsorption and X-Ray diffraction method. The Fischer-Tropsch synthesis was conducted at $300^{\circ}C$, 20bar in a fixed bed reactor for 60h. According to the results of the $N_2$ physical adsorption analysis, the BET surface area decreases as the composition of ${\gamma}-Al_2O_3$ decreases, and the pore volume and pore average diameter increase as the composition of ${\gamma}-Al_2O_3$ decreases except for the composition of ${\gamma}-Al_2O_3/SiO_2$ of 50/50 wt%. By the results of the X-Ray diffraction analysis, the particle size of ${\alpha}-Fe_2O_3$ decreases as the composition of ${\gamma}-Al_2O_3$ decreases. As a result of the Fischer-Tropsch synthesis, the CO conversion decreases as the composition of ${\gamma}-Al_2O_3$ decreases, and the selectivity of C1-C4 decreases until the composition of ${\gamma}-Al_2O_3$ was 25 wt%. In contrast, the selectivity of C5+ increases until the composition of ${\gamma}-Al_2O_3$ is 25 wt%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• Journal of the Korean earth science society
• /
• v.22 no.6
• /
• pp.528-547
• /
• 2001

The blastoporphyritic granite gneiss (BPGN) including much alkali-feldspar megacrysts occurs in Jiri mountains area, southwestern part of Sobaegsan massif, Korea. The BPGN is formed gneiss complexes with other gneisses in Precambrian. The BPGN was named as porphyroblastic gneiss with porphyroblasts of alkali-feldspar megacrysts by other researchers, but the BPGN includes of euhedral alkali-feldspars (microcline), and the boundary with the granitic gneiss represents sharp contact as intrusive relationship. The BPGN mainly composes of alkali-feldspar megacrysts, quartz, plagioclase, K-feldspar and biotite some almandine and accessary minerals are muscovite, chlorite, apatite, zircon and opaques. The alkali-feldspar is microcline with perthitic texture. An content of plagioclases show 30 to 40. Biotites occur two type, one is Brown biotite which shows compositional ranges of Mg/Fe+Mg ratios from 0.38 to 0.52, the other is Green Bt. which is retrograde product. Camels to be various sizes and shapes have composition of almandine with 73 to 80 mole percent, but represent retrogressive zoning from core (X$_{pyr}$: 15.9${\sim}$20.8) to rim (X$_{pyr}$:13.7${\sim}$15.9) to be evidence of retrograde metamorphism. Megacrysts of alkali-feldspar in the BPGN show rectangular shape of euhedral and some become ellipsoidal or spheroidal in shape and the average size up to 20 cm long. The megacryst includes of biotite, plagioclase and quartz, and rarely euhedral apatite as inclusions. In petrochemistry the BPGN represents granodiorite composition, characteristics of peraluminous S-type granitoid and calc-alkaline features.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.29-37
• /
• 2011

Purpose: In cases when implant supported overdenture is made by using standard size implant, additional procedure such as bone surgery and bone grafting can be required. And it gives burden to doctor and patient in terms of cost. Therefore, it is necessary to find the implant therapy for the edentulous patients in making denture with accordable cost and simple procedure. Materials and methods: Edentulous patients with upper and lower dentures participated in this study. Before the operation, survey about patient's satisfaction to the existing dentures was carried out. Surgical procedures included four small diameter implants installation anterior area and immediate loading. One and three month after the procedure, the same survey about patient's satisfaction was carried out, and radiography was taken. Results: We are doing research to the nine patients. Survival rate is 97.2 percent. The comparison of patient's satisfaction before and after surgery is performed based on oral health impact profile 49. We analyze mainly with masticatory discomfort, retention, aesthetics, social problem, psychological discomfort problems. As a result, satisfaction level is increased at all factors. Retention is the most increased satisfactory factor followed by mastication difficulty, pronunciation, psychological discomfort, social discomfort, aesthetics in order. Marginal bone loss is 0.21 mm at 12 weeks after implant placement. Conclusion: This research reveals that the denture supported by mini dental implant increases patient's satisfaction. This study will be continued with more patients for a long time and we are scheduled for taking additional radiography to check whether peri-implant bone resorption occurs or not.

• Korean Journal of Ecology and Environment
• /
• v.45 no.1
• /
• pp.72-81
• /
• 2012

We investigated the effects of acid mine drainage (AMD) from abandoned coal mines on benthic macroinvertebrate communities in the upper reaches of the Nakdong River from May to October in 2009. Qualitative and quantitative sampling (Surber sampler: $50{\times}50$ cm; mesh size, 0.2 mm) was conducted at 7 study sites and 3 control sites in the study area. We thus sampled 117 species belonging to 53 families, 15 orders, 6 classes, and 5 phyla; the Ephemeroptera, Plecoptera, and Trichoptera group (EPT-group) represented the majority of the benthic macroinvertebrate community (71 species; 64.5%). In the quantitative sampling, a total of 11,575 individuals belonging to 58 species of benthic maroinvertebrates were sampled from the study sites (Sites 1-7), whereas 2,844 individuals belonging to 79 species were sampled from the control sites (Sites A-C). Tolerant species such as oligochaetes, $Epeorus$ $pellucidus$, $Baetis$ $fuscatus$, Hydropsychidae species, and Chironomidae species were predominant in the study sites. The community indices for the study sites, such as MacNaughton's dominance index (DI) (mean${\pm}$SD, $0.52{\pm}0.21$; range, 0.33-0.85) and the Shannon diversity index ($H^{\prime}$) ($2.06{\pm}0.60$; 1.06-2.57), were different from those for the control sites (DI: $0.29{\pm}0.07$, 0.22-0.35; $H^{\prime}$: $3.13{\pm}0.14$; 3.03-3.30). In the study sites, shredders and scrapers were scarce, whereas gathering-collectors (mainly Chironomidae species) were relatively abundant, as were clingers and burrowers. The detrended correspondence analysis (DCA) and similarity analyses showed that benthic macroinvertebrate communities in the study sites were clearly separated from those of the control sites, with the greatest dissimilarity being noted at the uppermost study site (Site 1), which is located close to an abandoned coal mine. The Korean saprobic index (KSI) and the ecological score using benthic macroinvertebrates (ESB) showed that the uppermost study site (Site 1) was ${\alpha}$-mesosaprobic or heavily polluted, whereas other study sites were in a fair or relatively good condition.

• Journal of agricultural medicine and community health
• /
• v.10 no.1
• /
• pp.42-48
• /
• 1985

This study was carried out to obtain the basic data for epdemiological survey of hypertension in old population (60 years or more). From May, 1983 to April, 1984, 365 males and 335 females who inhabit in Ko-Chang Gun, Chonbuk Province were investigated for several factors as their socio-econmic status and laboratory examinations with blood pressure, and which factors were analysed by simple correlation and multiple regression analysis. The results are summarized as follows; 1) Sample size of this study is equivalent to 5.2%(male;6.7%, female;4.3%) of population in 60 years or more age group, and the mean age of samples is 70.6${\pm}$5.3 (yr.) in males and 71.4${\pm}$5.3 (yr.) in female (P>0.05). 2) Mean blood pressure of males are 135.9${\pm}$21.3mm Hg in systolic and 85.3${\pm}$13.4mm Hg in diastolic phase and in female, 131.0${\pm}$23.6 mm Hg and 84.1${\pm}$19.9 mm Hg (P < 0.01). Their prevalence rates of hypertension (${\geq}$ 140 mm Hg in systolic, ${\geq}$ 95 mm Hg in diastolic phases) are 33.7% in males, 40.6% in females (P < 0.01). 3) Serum cholesterol levels and other independent variables are revealed in normal ranges, and except to Vervaeck index (89.4${\pm}$5.6 in males, 87.5${\pm}$6.7 in females, p<0.01), other are not significant sexual differences (P>0.05). 4) In the simple correlation analysis, the main factors that affect to blood pressure are serum cholesterol levels (P < 0.05) and Vervaeck index (P < 0.01) in males, age (P <0.05) and Vervaeck index (P <0.01) in females. 5) In multiple regression analysis, prediction equations for blood pressure are calculated as follows; Ysm=-64.55+0.161(X1)+0.124(X2)-0.047(X3)+1.953(X4) Ydm=18.61-0.125(X1)+0.060(X2)+0.032(X3)+0.720(X4) Ysf=-0.22+0.536(X1)+0.134(X2)+0.068(X3+0.788(X4) Yaf=-14.46+0.685(X1)+0.033(X2)+0.176(X3)+0.362(X4) Ysm : Systolic blood pressure in male, Ydm : Diastolic blood pressure in male, Ysf : Systolic blood pressure in female, Ydf : Diastolic blood pressure in female. X1 : Age(year), X2 : Serum cholesterol level (mg%), X3 : Fastin blood sugar (mg% ), X4 : Vervaeck index.