• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.82-90
• /
• 2006

Recently the electrostatic 2-axis MEMS stages have been fabricated for the purpose of an application to PSD (Probe-based Storage Device). However, all of the components(platform, comb electrodes, springs, anchors, etc.) in those stages are placed in-plane so that they have low areal efficienceis, which is undesirable as data storage devices. In this paper, we present a novel structure of an electrostatic 2-axis MEMS stage that is characterized by having large area platform. for obtaining large area efficiency, the actuator part consisting of mainly comb electrodes and springs is placed right below the platform. The structure and operational principle of the MEMS stage are described, followed by a design procedure, structural and modal analyses using FEM(Finite Element Method). The areal efficiency of the MEMS stage was designed to be about 25%, which is very large compared with the conventional ones having a few percentage.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.531-532
• /
• 2006

This paper presents our implemented, synthesized and tested on demand and partial reconfiguration approaches for FIR filters using Xilinx Virtex FPGAs. Our scope is to implement a low-power, area-efficient autonomously reconfigurable digital signal processing architecture that is tailored for the realization of arbitrary response FIR filters on Xilinx Virtex4 FPGAs. The implementation of design addresses area efficiency and flexibility allowing dynamically inserting and/or removing the partial modules to implement the partial reconfigurable FIR filters with various taps. This partial reconfigurable FIR filter design shows the configuration time improvement, good area efficiency and flexibility by using the dynamic partial reconfiguration method.

• Korean Journal of Remote Sensing
• /
• v.22 no.5
• /
• pp.439-443
• /
• 2006

Image co-registration is the process of overlaying two images of the same scene. One of which is a reference image, while the other (sensed image) is geometrically transformed to the one. Numerous methods were developed for the automated image co-registration and it is known as a timeconsuming and/or computation-intensive procedure. In order to improve efficiency and effectiveness of the co-registration of satellite imagery, this paper proposes a pre-qualified area matching, which is composed of feature extraction with Laplacian filter and area matching algorithm using correlation coefficient. Moreover, to improve the accuracy of co-registration, the outliers in the initial matching point should be removed. For this, two outlier detection techniques of studentized residual and modified RANSAC algorithm are used in this study. Three pairs of Landsat images were used for performance test, and the results were compared and evaluated in terms of robustness and efficiency.

• Journal of Internet of Things and Convergence
• /
• v.7 no.3
• /
• pp.9-14
• /
• 2021

This paper discovers the energy loss factors through the insulation diagnosis of houses or buildings, and proposes directions for energy efficiency improvement. The energy efficiency factor of a building consists of insulation diagnosis, thermal bridge diagnosis, window diagnosis, airtight diagnosis, and equipment diagnosis. Among the residents and facilities in the energy welfare blind spot, an energy efficiency diagnosis was conducted for one senior citizen building located in Naju-si, Jeollanam-do, and energy efficiency diagnosis was conducted after insulation was installed. Energy measurement, diagnosis and analysis were performed using the IoT-based integrated wired/wireless energy diagnosis platform, Energy Finder. As a result of comparison, an overall energy saving rate of 16.38% was achieved. Annual heating energy consumption per unit area decreased from 333.51kWh before construction to 277.35kWh after construction, and annual cooling energy consumption per unit area decreased from 5.51kWh before construction to 5.22kWh after construction. The annual primary energy consumption per unit area decreased from 464.52kWh before construction to 403.69kWh after construction, and the annual energy cost was reduced from 3,063,307.14 won before construction to 2,641,072.49 won after construction. The additional improvement work is needed on the standards affecting energy efficiency other than insulation.

• Journal of Korean Library and Information Science Society
• /
• v.41 no.4
• /
• pp.35-50
• /
• 2010

The purpose of this study was to analyse the ralative efficiency of 15 public libraries over a time period(2006-2008) by Data Envelopment Analysis(DEA). The selected input variables were total staff, total area and total holdings. And the selected output variables were total circulations and total user. The results are as followed. First, a technical efficiency trend of public libraries has been improved since 2006. Second, a technical efficiency increase can be explained by increase of a pure technical and scale efficiency both.

• Journal of dental hygiene science
• /
• v.7 no.4
• /
• pp.225-233
• /
• 2007

This study, to investigate the job burnout and coping behaviors that clinical dental hygienists feel in the work process, has collected 322 clinical dental hygienists working in Daegu, Kyungbuk province, and Ulsan and had a conclusion as follows. 1. The average of area job burnout and coping behaviors were as follows; emotional burnout, 3.26, cynical manners, 2.63, the declination of job efficiency, 2.58, the total average, 2.82. 2. The average of area were as follows; active coping, 3.36, passive coping, 2.95, and the total average, 3.19. 3. The difference of job burnout relating to general characteristics was shown that the lower education level and age they were in, the significantly higher the declination of job efficiency and burnout area were. The unmarried had significantly higher points at cynical manners, the declination of job efficiency and burnout. Besides, the introspective had significantly higher points at emotional exhaustion, cynical manners, and burnout area. 4. The difference of job burnout related to working circumstance was shown that those with short working experience and those in charge of the general treatment showed significantly high points at the declination of job efficiency. And the less annual salary, the significantly higher points at cynical manners, the declination of job efficiency and burnout area. 5. In the correlation between job burnout and coping method, burnout area has a significantly normal correlation with active coping and coping area, whereas, it has significantly abnormal correlation with passive coping. 6. As for the difference of area burnout relating to coping behaviors, in coping area A group(under average) had significantly higher points than B group(over average) at the declination of job efficiency and burnout area. From the above results, it was proved that the clinical dental hygienists in younger age, with shorter work experience and less annual salary, no marital spouse had higher points at burnout and passive coping.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1567-1573
• /
• 2010

The purpose of this study is to develop spatial configuration and area calculation method of warehoue. This paper deals with warehouses with palletized cargo since recently pallets are widely used in many warehouses to enhance efficiency. We identify spatial configuration and characteristics of each area. To represent realistic situations, we analyze characteristics of logistics equipment as well as interview results with expert warehouse architects. Through these analysis we suggest guidelines on area calculation of warehouse.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.3
• /
• pp.115-125
• /
• 2018

In order to examine the ways to improve the efficiency of R&D investment, this paper presents analysis on both quantitative and qualitative efficiency of R&D projects. As Korea's R&D investment has significantly increased in recent years, the efficiency of R&D investment has attracted attention. In this paper, a Data Envelopment Analysis(DEA) method is used to construct models for quantitative efficiency and qualitative efficiency analysis. Based on a cases of agricultural R&D projects of Korea, the efficiency of national R&D projects were analyzed and their quantitative and qualitative efficiencies are compared. As a result, statistically significant difference between quantitative and qualitative efficiency was found. Also, characteristics of Decision Making Units(DMUs) which can influence both quantitative and qualitative efficiency were identified. In particular, the stage of a R&D project has significant impact on R&D efficiency. This study suggests that in order to enhance R&D efficiency both quantitative and qualitative nature of outputs should be considered when measuring R&D efficiency.

• Health Policy and Management
• /
• v.33 no.3
• /
• pp.355-362
• /
• 2023

Background: Financial efficiency in monetary units and operational efficiency in non-monetary units are separately classified and evaluated. This is done to prevent the duplication of monetary units and non-monetary units in inputs and outputs. In addition, analyses are conducted to determine the factors that affect each aspect of efficiency. To prevent duplication of monetary and non-monetary units in inputs and outputs, financial efficiency, consisting of monetary units, and operational efficiency, comprising non-monetary units, are separately classified and evaluated. Furthermore, an analysis is conducted to identify the factors that affect each aspect of efficiency. Methods: This study conducted a panel analysis of 34 regional public hospitals and influencing factors on efficiency for 5 years from 2015 to 2019. Financial efficiency and operational efficiency were calculated through data envelopment analysis. Moreover, multiple regression analysis was conducted to identify the factors that influence both financial efficiency and operational efficiency. Results: The factors that affect financial efficiency include the number of medical institutions within the treatment area and the ratio of patients receiving medical care. Additionally, operational efficiency is influenced by the type of medical institution, the number of medical institutions within the treatment area, and the number of nursing positions per 100 beds. Conclusion: In order for regional public hospitals to faithfully fulfill their functions and roles as regional base public hospitals, several measures are necessary. Firstly, continuous monitoring and reasonable support are required to ensure efficient operation and performance. Secondly, a financial support plan tailored to the characteristics of local medical centers is needed. Additionally, local medical centers should strive to enhance their own efficiency.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1295-1296
• /
• 2007

A lot of researches about dye-sensitized solar cell (DSC) are recently being conducted. Because DSC has several advantages to pass the limits of silicon solar cells such as a low manufacturing expense, a simple manufacturing process and its transparency. But most researches on DSC are still conducted about the unit cell and laboratory-centered. That is, present researches on DSC are not practical. Therefore, researches about large area cells and modules have to be prerequisites for DSC to have the practicality. Characteristics of large area DSC are so different from those of small area DSC in aspect of fill factor and efficiency. In this study, we made an experiment on finding suitable size of DSC that has the most effective power according to the variation of active area. In detail, the experiment was conducted about the optimum ratio of length to width and we introduced the ratio of active area to non-active area to find the active area which has the best output. Because small DSC doesn‘t have the best output in comparison with total area of cell although the smaller DSC has the better efficiency. As a result, we achieved the optimum ratio of length to width of 8:3 and active area of $8cm^2$ as the optimum size for upscaling DSC.