• 제목/요약/키워드: Architectural Materials

검색결과 1,307건 처리시간 0.03초

지방도시근교 단독주택의 외피구성 현황에 관한 연구 - 광주광역시/전남 소규모 건축설계사무소 실무자를 대상으로 - (A Study on the Current Status of Building Envelope in detached houses of near Local Cities - with Staff of Small-sized Architectural Design Firms in Gwangju and Jeonnam -)

  • 박성진;이창재
    • KIEAE Journal
    • /
    • 제13권2호
    • /
    • pp.53-60
    • /
    • 2013
  • This study examined the building envelope structure used in small housings near urban area which have not good energy source in relation to the application of passive design for energy saving of small-sized architectural design firms in local cities and aimed to provide the basic materials of future design direction of designers and housing owners by analyzing economy of a project in order to know the amount of energy saving and additional expenses depending on the building envelope pattern. As a result of comparing and examining the energy saving cost from the period of use compared to investment by the thickness of insulating materials based on building envelope pattern for energy saving, it was found that the thicker the insulating materials are, the more energy saving amount is. While the current bead-type insulating materials have short payback period due to low initial investment, extruded insulating materials show the difference of five years compared to bead-type insulation because of its high initial investment.

일체형 중공재의 중공부 내부형상에 따른 이방향 중공슬래브의 전단성능 평가 (Shear Performance of Board-type Two-way Voided Slab)

  • 최현민;박태원;백인관;김제섭;한주연
    • 콘크리트학회논문집
    • /
    • 제27권6호
    • /
    • pp.651-659
    • /
    • 2015
  • 최근에 사회적 요구와 경제적인 요구로 인해서 장스팬 건축물이 증가하고 있다. 그러나 장스팬 건축물은 자중이 증가하여 처짐 진동 소음의 문제가 있다. 이러한 문제를 해결하기 위하여 판형중공슬래브가 제안되었는데 이는 슬래브 안에 일체형 중공재를 삽입함으로써 자중이 감소된 슬래브를 만들 수 있다. 이 시스템은 휨성능에는 영향을 받지 않는 단면을 중공재로 대체함으로써 슬래브의 강성은 그대로 유지하면서, 소음 및 처짐을 줄이고 자중을 감소할 수 있는 장점이 있다. 그러나 이 시스템의 경우 부력에 의해 일체화된 중공재가 상승한다는 단점이 있다. 따라서 판형 중공재 고정장치를 개발하였고, 또한 이를 삽입한 판형중공재의 성능을 알아보기 위하여 7개의 실험체를 제작하여 그 성능을 알아보고 그 결과 나타난 수평전단파괴에 대해서 예측을 할 수 있는 식을 제안하였다.

PVC 표면치장재를 적층한 치장목질마루판의 열특성 및 기초 품질성능 분석 (The Analysis of Thermal Conductivity and Basic Quality Performances of Decoration Wood-based Flooring Board Laminated with PVC Surface Decoration Materials)

  • 박철우
    • 대한건축학회논문집:구조계
    • /
    • 제34권1호
    • /
    • pp.53-60
    • /
    • 2018
  • For test on flooring board laminated with PVC decoration materials in order to replace the current surface materials such as HPL in decoration wood-based flooring board. the Results of comparison and analysis are as follows: For thermal conductivity, flooring board decorated with PVC did not show huge differences when temperature was rising and lowering compared to the flooring materials laminated with the existing HPL surface materials. It seems the most meaningful results for using it as indoor flooring materials. That is, in Korea where there is the culture focusing on ondol heating, use amount of heat energy and efficiency of flooring materials are very important and sensitive issues, involving immediately with household economy of final consumers, and it might be a criteria to judge basic performances required as flooring materials. As a result of the analysis on mandatory durability test items such as abrasion resistance, absorption width expansion rate, impact resistance, surface hardness, and impact absorption for flooring materials, compared to flooring board laminated with general HPL surface decoration materials, decoration wood-based flooring board laminated with PVC surface decoration materials which is higher abrasion resistance with smaller transformation and has better durability and impact absorption of the surface, is available for actual application as indoor flooring board, and for replacing surface decoration materials impregnated with heat-hardened resion such as HPL.

20세기 비종교적 스테인드글라스의 전개과정과 건축적 특성 (The Process of Development and Architectural Characteristics of Secular Stained Glass in the 20th century)

  • 김정신
    • 한국실내디자인학회논문집
    • /
    • 제17권1호
    • /
    • pp.3-10
    • /
    • 2008
  • This study is concerned with the process of development and architectural characteristics of secular stained glass in the 20th century. Stained glass had been architectural art from the origin. But it had declined since the Renaissance era, and began to revive in the early 20th century. Stained glass work is very flourish in Korea today, but it is still treated as simple decoration or 2-dimensional mosaic. Architect and interior designer even have little understanding of architectural character of stained glass. In order to recover the architectural nature of stained glass, I have considered the process of development of secular stained glass in the 20th century, and analysed the works of Frank Lloyd Wright, the postwar German artists, Georg Meistermann, Ludwig Schaffrath, Johannes Schreiter, and English artist, Brian Clarke. Major findings of the study are as followings : First, stained glass has come to life again from the secular glass painting decoration in the end of the 19th century, through Art-Nouveau, De Stil, Bauhaus in the beginning of the 20th century, and L'Art $Sacr\acute{e}$. Second, Frank Lloyd Wright, the postwar German artists and Brian Clarke have established the architectural concept and potentiality of the modem stained glass in the secular field. Third, They have done by coming back to the basic creative method by traditional lead-came technique in spite of the development of various materials and techniques. Forth, stained glass fundamentally has architectural characteristics as the characters of Space, Time, Place, Context, and they have showed the new possibility of stained glass by recovery of these characters.

조선후기 궁실건축에 사용된 격식기법의 유형과 변천 (The Architectural Crafts as a Code of Manners and Their Historical Changes in Palatial Buildings and Royal Residences in the Late Joseon Dynasty)

  • 안소현;전봉희
    • 건축역사연구
    • /
    • 제28권6호
    • /
    • pp.43-54
    • /
    • 2019
  • The grade of East Asian architecture is generally classified by the size, the shape of the roof, and the type of bracket set. The craftsmanship of columns, beam, purlin, stylobate, column base stone and paintwork is also a contributing factor for such classifications. These classifications can be found not only in historical documents such as 「Oksajo(屋舍條)」 of 『Samguksagi(三國史記)』 but also in 「house details regulations of residential architecture(家舍規制)」 of Joseon Dynasty. However, there are differences in detailed designs among the same grade of architecture regardless of the classification. In this research, the Palace, the Royal Residence(宮家), and the Jaesil(齋室) are considered as the Palatial Buildings and Royal Residences. And the advanced architectural o details which appear only in the Royal Architectures are defined as the 'The Architectural Crafts as a Code of Manners'. The Architectural Crafts as a Code of Manners is detailed design, which can be seen as fabrication of materials and supplementary factors. The Architectural Crafts as a Code of Manners used in the Palatial Buildings and Royal Residences reveal the types and their historical changes. This research will present a basis for the repair and restoration of cultural heritages to be carried out in the future, and also prevent them from further damages, thus help to preserve the cultural heritages.

화력발전소 바텀애쉬와 수산화나트륨 활성화제를 이용해 제작한 지오폴리머의 압축강도 특성 (Compressive Strength Properties of Geopolymer Using Power Plant Bottom Ash and NaOH Activator)

  • 안응모;조성백;이수정;미야우치 히로유키;김규용
    • 한국재료학회지
    • /
    • 제22권2호
    • /
    • pp.71-77
    • /
    • 2012
  • When a new bonding agent using coal ash is utilized as a substitute for cement, it has the advantages of offering a reduction in the generation of carbon dioxide and securing the initial mechanical strength such that the agent has attracted strong interest from recycling and eco-friendly construction industries. This study aims to establish the production conditions of new hardening materials using clean bottom ash and an alkali activation process to evaluate the characteristics of newly manufactured hardening materials. The alkali activator for the compression process uses a NaOH solution. This study concentrated on strength development according to the concentration of the NaOH solution, the curing temperature, and the curing time. The highest compressive strength of a compressed body appeared at 61.24MPa after curing at $60^{\circ}C$ for 28 days. This result indicates that a higher curing temperature is required to obtain a higher strength body. Also, the degree of geopolymerization was examined using a scanning electron microscope, revealing a micro-structure consisting of a glass-like matrix and crystalized grains. The microstructures generated from the activation reaction of sodium hydroxide were widely distributed in terms of the factors that exercise an effect on the compressive strength of the geopolymer hardening bodies. The Si/Al ratio of the geopolymer having the maximum strength was about 2.41.

빌라 사보아의 재료 패턴 및 색채 사용 연구 (A Study on the Usage of the Color and the Pattern of Materials in Villa Savoye)

  • 김소희
    • 한국실내디자인학회논문집
    • /
    • 제17권5호
    • /
    • pp.133-140
    • /
    • 2008
  • This study is purposed to understand the usage of the color and the material pattern in detail and to apply for interior architecture. Many documents have prescribed the color and the pattern at random. While the usage of the color and the materials was ignored rather than architectural form, the importance of the color and the materials stands out in modern interior space. The villa, the weekend home of the Savoye family, was built between 1928 and 1931. Particularly, the villa Savoye was focused for this study. Le Corbusier viewed case pieces for storage and wall partition for division as architecture, and he units furniture and architecture by developing partition that could be painted either the wall color to become part of the wall or in contrasting colors to stand out as wall partition. He loved white and lie believed in using it for interiors, but noted that it should also be balanced with a wall related polychromy. Color became an integral part of white structure of the villa savoye that was raised on stilt with an exterior wall at the base painted green as a visual connection with the lawn. Color was used architecturally in the interior as well, with white walls interrupted by planes of pink, blue and red ocher and it gives the space an unexpected playfulness with tile color of the finishing materials. the various usage of the color and material patterns constitute an element of great architectural richness. They have a unique principle based on emotional order and make the man move to another space and experience the spacial connection.

축산시설의 지역경관적 이미지에 관한 연구 (A Study on Local Landscape Image of Barn Architecture)

  • 정건채;김갑득
    • 한국농촌건축학회논문집
    • /
    • 제18권2호
    • /
    • pp.55-62
    • /
    • 2016
  • The goal of this study is to recreate the identification of landscape image through the Agricultural Architecture in rural area. Most of them are not kept with houses in traditional village and the other structures in garden area of Korea, because they are located in the isolated field or placed near along the local street, are designed as a very heavily designed building, and are covered by different materials and color against village architecture. I researched cattle barns in both Korea and Germany of what they have had images in a distance-view points of local area, so that I might find a suitable image of Barn Architecture with topography of rural areas. I surveyed rural agricultural buildings with different point of views on landscape structure, architectural form and materials, and conditions animal welfare. There are three results from this paper as follows: First, the placement of animal barn in garden area is isolated to village so that it may keep a clean environment of village, which it makes non appropriate to land using and village view. Second, the architectural form makes a different image to the village building, because it has an oversize against houses in village or has no rhythm and dividing form of simple gable barm. Third, the barn architecture is better to consider of eco-friendly materials with animal welfare concept design, when it starts to design the barn in the field.

안트라사이트를 활용한 산화마그네슘 보드의 실내 공기질 중 라돈가스 농도 저감 평가 (Evaluation of Decreasing Concentration of Radon Gas for Indoor Air Quality with Magnesium Oxide Board using Anthracite)

  • 편수정;임현웅;이상수
    • 한국건축시공학회지
    • /
    • 제18권1호
    • /
    • pp.9-15
    • /
    • 2018
  • 지구상에 존재하는 라돈가스는 바위, 토양, 건축자재 등에서 방출되는 1급 발암물질로 유일한 기체상으로 존재하고 있다. 공기에 비해 무겁고 분자량이 커 하부에 가라앉아 있지만 이동성이 크다. 라돈가스는 특성상 실외에서 대기에 확산되지만 밀폐되고 환기가 어려운 실내공간의 농도는 수천 배까지 증가할 수 있다. 이러한 라돈가스의 위해성을 해결하기 위해 안트라사이트를 활용한 경화체의 라돈가스 저감 특성과 더불어 실내 마감재로 사용할 수 있는 기초 성능평가를 진행하였다. 기존 여과재로 사용된 안트라사이트를 사용하여 경화체를 제작하였으며, 기존 실내에서 사용된 건축자재 중 라돈을 방출하는 석고보드를 대체할 수 있는 시험을 진행하였다. 결합재로는 경소 마그네시아를 사용하였고, 경소마그네시아의 경화를 위해 염화마그네슘을 사용하였다. 흡착재로 사용된 안트라사이트의 치환율은 0, 10, 20, 30, 40, 50 (%)로 총 6수준으로 진행하였으며,W/B는 40%로 고정하였다. 시험항목은 휨파괴 하중, 열전도율, 라돈가스 농도를 진행하였으며, 양생조건은 항온항습 양생(습도 $80{\pm}5%$, 온도 $20{\pm}2^{\circ}C$)으로 진행하였다.

페로브스카이트 할로겐화물 박막의 발광 측정 조건에 따른 특성 분석 (Photoluminescence Characterization of Halide Perovskite Films according to Measuring Conditions)

  • 조현아;이승민;노준홍
    • 한국재료학회지
    • /
    • 제32권10호
    • /
    • pp.419-424
    • /
    • 2022
  • Halide perovskite solar cells (PSCs) have improved rapidly over the past few years, and research on the optoelectrical properties of halide perovskite thin films has grown as well. Among the characterization techniques, photoluminescence (PL), a method of collecting emitted photons to evaluate the properties of materials, is widely applied to evaluate improvements in the performance of PSCs. However, since only photons emitted from the film in the escape cone are included, the photons collected in PL are a small fraction of the total photons emitted from the film. Unlike PSCs power conversion efficiency, PL measuring methods have not been standardized, and have been evaluated in a variety of ways. Thus, an in-depth study is needed of the methods used to evaluate materials using PL spectra. In this study, we examined the PL spectra of the perovskite light harvesting layer with different measurement protocols and analyzed the features. As the incident angle changed, different spectra were observed, indicating that the PL emission spectrum can depend on the measuring method, not the material. We found the intensity and energy of the PL spectra changes were due to the path of the emitted photons. Also, we found that the PL of halide perovskite thin films generally contains limited information. To solve this problem, the emitted photons should be collected using an integrating sphere. The results of this study suggest that the emission spectrum of halide perovskite films should be carefully interpreted in accordance with PL measuring method, since PL data is mostly affected by the method.