• Journal of The Korea Institute of Healthcare Architecture
• /
• v.4 no.6
• /
• pp.87-94
• /
• 1998

Recently, health care facilities has been rapidly reformed. This reformatioin has been so per vasive that even the newest hospital is rapidly becoming obsolete. Since the health care field is continually evolving, architecture for health must be adapted to the new environments. Today, a society with the emphasis on the broader, interactive scope of grobal markets and grobal communications, pursues the health network as the next step in evolution of health care facilities. Therefore, architectural firms will be forced to develop new skills, services, emphases, and organizational structures in order to respond to the rapidly changing needs and demands. It is our hope to present the possibilities of this healthcare network of the future.

• Journal of the Korean Society of Safety
• /
• v.24 no.4
• /
• pp.59-65
• /
• 2009

This paper presents the safety performance of domestic small-sized construction companies including the characteristic and current status of safety management actions of the firms. Safety performance both at the head office and job sites of each construction companies, which are divided two groups by construction capacity ranking, are investigated. The investigation results on the small-sized construction companies in this study was compared with those of on the large and medium-sized construction companies studied in existing papers. General recognition that there is a wide difference of safety performance among domestic construction companies by construction capacity ranking was companies by this study. Especially, Data analysis shows that the safety performance of the small-sized companies has the larger difference than large and midium-sized companies.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.875-880
• /
• 2005

This paper represents a partial outcome of a doctoral research undertaken at the University of Tokyo, Japan. The doctoral research looked on the phenomenology of innovation and its implications for the construction industry in Japan. This paper focuses on the perception of innovation by major Japanese construction clients and major Japanese construction firms. Among construction researchers innovation is a popular topic and no conference will miss covering the issue. After a period of very critical judgment on the ability of the construction sector to innovate and partially even frustration on the inflexibility of the sector, a much more positive attitude was taken. At present, most construction researchers would agree that the construction sector clearly is very innovative. That stands in contrast with how construction practitioners perceive their own sector. This paper presents the results of and empirical research in how construction clients and contractors in Japan perceive the issue of innovation. In fact the perceptions differ largely and give interesting insights on particularities of the Japanese construction sector and on the mismatch of clients and contractors perceptions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1450-1460
• /
• 2015

This study is to analyze various methods of block design elements applied in the recent apartment housing design competitions for Sejong city. It is expected to find the new design trend and good design characteristics of apartment building forms to use as the basic data of apartment housing design, because it is a case study on the ambitious design competition of the city that many major architectural firms in Korea entered and eager to propose new ideas. The results of this study are following : (1) The forms of slab block are classified into 8 types(the best applying one is ㄱ type). The forms of point block are classified into 9 types(the best applying ones are ㅁ, L and - type). (2) For the shapes of core, the forms of opposite core are classified into 6 types, the forms of parallel core are 3 types. (3) The forms of roof are classified into 4 types. The flat type is applied to 95 percent of the total cases. (4) The shapes of block mass are classified into 5 types(the best applying ones are general and void type), facade forms are 3 types(the best applying one is horizontal division type).

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.6
• /
• pp.31-39
• /
• 2016

This study aims to give suggestions based on survey to improve the quality of Global Construction Engineer Training Program in line with the government goals. The domestic construction industry in Korea has kept shrinking, whereas the global construction market is forecasted to keep expanding in the future. It has become an urgent task to be taken up for construction contractors and engineering firms so as to improve their capacity, in particular, in the fields of planning, management, finance as well as engineering. To deal with the lack of capacity of the domestic engineers and to help them emerge as global players in the competitive overseas construction market, the Ministry of Land, Infrastructure and Transport of the Korean government has designed a program called 'Global Construction Engineer Training Program.' The eligible target of the training program is mid-career professionals who are working for the construction contractors or engineering firms. To draw suggestions for this program, an importance-satisfaction analysis is conducted to evaluate the effectiveness of the training program implemented by the S University. The S University, along with C University, was selected as an implementation organization of the program in 2014 by the government. Through an email survey, the participating students in the program were asked questions on the importance and satisfaction against 17 indicators classified into 5 categories: instruction method, professional knowledge of instructors, contents of program, curriculum, and facility and environment. The survey results show that students are satisfied with the overall quality of the program, but it was also found that they want the program opens more coursework on practical application of knowledge, case studies, and global networking.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.3
• /
• pp.53-61
• /
• 2011

After several collapse accidents of large structures in the early 1990s in Korea, the government enacted a law that architectural, engineering and construction firms are obliged to have insurance for projects over a certain size. Particularly, with regard to insurance in design and construction supervision works (i.e. engineering insurance), although several operation-based problems were pointed out from practitioners, still little research has been done on analyzing current regnlartory and operational state and suggesting policy alternatives. Hence, this study applies Delphi technique to solicit current operational problems and propose a series of improvements on engineering insurance based on interview surveys targeting major market participants: municipalities, engineering firms, and insurance companies. Key findings culminate in adopting guarantee limits based on credit evaluation, abrogating joint surety, covering a loss of life, increasing insurance entrance fee, extending time covered, and etc. Reaching a consensus on the proposed alternatives between the market participants will form the foundation for sound developments of construction design and engineering industry.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.4
• /
• pp.433-439
• /
• 2015

The aim of this study is to suggest basic data about efficient motivation plans for improving the image of the design and Construction Management (CM) field and enhancing professional consciousness of employees. The major findings and conclusions of this study are as follows. First, the employees in design firms had a relatively high level of dissatisfaction with the 'Reduction of work hours', and those in CM companies had a relatively high level of dissatisfaction with the 'Fringe benefit conditions'. Second, when the effects of the items of job satisfaction on overall job satisfaction were analyzed through factor analysis, job performance satisfaction had the biggest effect on the employees in design firms, and intrinsic reward and opportunity satisfaction had the biggest effect on those in CM companies.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.5
• /
• pp.52-62
• /
• 2023

The objective of this study is to propose an automated algorithm for precise cutting length of slab rebar complying with regulations such as anchorage length, standard hooks, and lapping length. This algorithm aims to improve the traditional manual quantity take-off process typically outsourced by external contractors. By providing accurate rebar quantity data at BBS(Bar Bending Schedule) level from the bidding phase, uncertainty in quantity take-off can be eliminated and reliance on out-sourcing reduced. In addition, the algorithm allows for early determination of precise quantities, enabling construction firms to preapre competitive and optimized bids, leading to increased profit margins during contract negotiations. The proposed algorithm not only streamlines redundant tasks across various processes, including estimating, budgeting, and BBS generation but also offers flexibility in handling post-contract structural drawing changes. In particular, the proposed algorithm, when combined with BIM, can solve the technical problems of using BIM in the early phases of construction, and the algorithm's formulas and shape codes that built as REVIT-based family files, can help saving time and manpower.

• Korean Institute of Interior Design Journal
• /
• no.8
• /
• pp.44-57
• /
• 1996

Now interior designers have to meet this challenge by rising to the occasion and taking advantage of opportunities while strengthening their skills which have not kept pace with the increasing emphasis on design. furthermore, they are hampered by the lack of a general working design methodology. Interior designers in Korea have been slow to recognize the need for developing a specification methodology manual which could be adapted to meet varying requirements and modified to reflect designers experiences. The design process in Korean interior design often involves utilizing drawing document methods based on architectural prototypes rather than upon drawing methods developed by design firms as a result of work experience s and unique needs. However, these unique nees are nearly always limited by traditional working drawing methods. This has led to confusion and inaccuracies due to the lack of a single starndardized and universally acceptable working drawing methodology which is capable of reflecting the needs of all parties involved , partiality those of interior designers. This thesis is an attmepted to establish the necessity for developing a better working drawing methodogoy or technical mans of satisfying the information sorting and processing need s of interior design professionals, a five step suggestion for developing such a methodology follows. First, arrange pertinent design research information by means of a process which can be employed throughout the design process, from inception through to working drawing stage. The end result should be an interior architectural design process culminating in a pattern skillfully blending architecture, vision and product with environment . The design process should be manifested into a series of definable steps and yet sufficiently flexible and variable in order to provide the most apropos design solution. Secondly , motify the design methodology systematically according to site conditions and prevailing construction technology and manifest the design process in a booklet form so that it reflects a desired pattern. Thirdly, this methodology should incorporate a stand-ardized and functional process capable of being utilized to impact clear design concepts and objectives with preci-sion and efficiency in a manual form.

• Journal of KIBIM
• /
• v.9 no.2
• /
• pp.29-44
• /
• 2019

This paper is to explore examples of complementary use of digital and physical models. The reason for this is to suggest a method for commercializing architectural design considering high technology. These cases are the practical and educational environment in which design processes based on digital computation technology are performed. Also, in this environment, analog design media (eg, physical models) still being used in the design process using digital computing. Indeed, in this environment, designers are exploiting digital and physical models to address the types of risks that can be discovered when designs are implemented and these risks. By analyzing these cases, we define the roles of digital and physical models to visualize and resolve risks. This paper focuses on one of method as "prototyping", which is used in the field of machinery and is a difficult method to carry out in the conventional design process. In particular, designers look for benefits that encourage designers in utilizing current digital computation technologies (eg, parametric design, simulation, building information models, and digital fabrication). Among the roles of the physical model, roles that can not be replaced by the digital model are explored. It is clear that this case-based study has difficulty in generalizing the design method. However, it helps the designers of today's practical and educational environment to verify and design the actual details of construction and operation when applying and developing unfamiliar materials and methods in the field of architecture.