• 소음진동
• /
• 제5권3호
• /
• pp.345-352
• /
• 1995

A very simple and computationally efficient numerical method is developed for the free vibration of arbitrary shape plates. A set of two- dimensional simple series functions is used as an admissible displacement functions in the Rayleigh-Ritz method to obtain the natural frequencies for the arbitrary shape plates. From the prescribed starting function satisfying only the geometric boundary conditions, the higher terms in the series function are constructed with adding order of polynomial. Natural frequencies are obtained for the arbitrary shape plates, with combinational boundary conditions. The obtained numerical results are presented, some cases are verified with other numerical methods in the literature.

• Structural Engineering and Mechanics
• /
• 제6권2호
• /
• pp.173-183
• /
• 1998

In the shape design of flexible structures, it is useful to predict the initial shape from the desirable large deformed shapes under some loading conditions. In this paper, we present a numerical procedure of an initial shape determination problem for hyperelastic materials which enables us to calculate an initial shape corresponding to the prescribed deformed shape and boundary condition. The present procedure is based on an Arbitrary Lagrangian-Eulerian (ALE) finite element method for hyperelasticity, in which arbitrary change of shapes in both the initial and deformed states can be treated by considering the variation of geometric mappings in the equilibrium equation. Then the determination problem of the initial shape can be formulated as a nonlinear problem to solve the unknown initial shape for the specified deformed shape that satisfies the equilibrium equation. The present approach can be implemented easily to the finite element method by employing the isoparametric hypothesis. Some basic numerical results are also given to characterize the present procedure.

• 대한조선학회논문집
• /
• 제53권1호
• /
• pp.45-53
• /
• 2016

The interaction between the hull of ship and free surface of water generates important loads during slamming motion. In the present study, the slamming load applied on the sectional surface of two-dimensional arbitrary bodies has been investigated under several falling velocities. This simulation has been done with the commercial CFD software ANSYS FLUENT^®. Through the conventional MARINTEK experiments for the benchmark of the simulation, we verified the impact pressure values between the experiments and simulation results. Two arbitrary ship bow section models, Panamax-like(with small convex bulb and flare) and Post panamax-like(with large convex bulb and flare) are also investigated. Simulation results show that a maximum impact pressure on the Post panama-like shape is higher than the Panamax-like shape. According to both a lump of water generated by arbitrary shape and various dead-rise angles of the shape, the pressure picks were enhanced in the simulation.

• Structural Engineering and Mechanics
• /
• 제70권6호
• /
• pp.711-722
• /
• 2019

Considering stress singularities at point support locations, buckling solutions for plates with arbitrary number of point supports are hard to obtain. Thus, new Hp-Cloud shape functions with Kronecker delta property (HPCK) were developed in the present paper to examine elastic buckling of point-supported thin plates in various shapes. Having the Kronecker delta property, this specific Hp-Cloud shape functions were constructed through selecting particular quantities for influence radii of nodal points as well as proposing appropriate enrichment functions. Since the given quantities for influence radii of nodal points could bring about poor quality of interpolation for plates with sharp corners, the radii were increased and the method of Lagrange multiplier was used for the purpose of applying boundary conditions. To demonstrate the capability of the new Hp-Cloud shape functions in the domain of analyzing plates in different geometry shapes, various test cases were correspondingly investigated and the obtained findings were compared with those available in the related literature. Such results concerning these new Hp-Cloud shape functions revealed a significant consistency with those reported by other researchers.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.497-506
• /
• 1997

In this paper described is the software developed to calculate the physical properties of arbitrary section shape. The software consists of arbitrary section display module(ASDM) and section property calculation module(SPCM). ASDM defines and displays the shape of arbitrary section and SPCM calculates its properties such as area, centroid, moment of inertia, torsional constant, etc.. In many cases, calculation of section properties is not easy because user has to define the vertex coordinates which are difficult to do so in the case of arbitrary section. In the developed software, however, since user is asked to define only points of central lines and thickness of arbitrary section, the calculattion task of arbitrary section is very effective.

• 한국멀티미디어학회논문지
• /
• 제5권3호
• /
• pp.255-262
• /
• 2002

윤곽선 시퀀스는 임의 형상을 간단하면서도 정확하게 표현할 수 있는 좋은 표현법이 될 수 있다. 그러나, 형상을 구성하는 화소로부터 쉽게 구할 수 있는 면적, 무게중심, 오리엔테이션 방향, 투영 히스토그램 등과 같은 형상 특징들을 윤곽선 시퀀스로부터 직접 구하기는 어렵기 때문에, 윤곽선 시퀀스를 임의 형상에 대한 표현법으로 잘 사용하지 못하였다. 본 논문에서는 형상 내부의 연속된 화소들로 구성된 수직(또는 수평)의 라인 세그먼트를 의미하는 크로스 섹션 개념을 이용하여, 윤곽선 시퀀스로부터 형상 특징들을 쉽게 구할 수 있음을 보인다. 윤곽선 시퀀스를 한번 순차적으로 탐색함으로써 크로스 섹션을 효율적으로 구할 수 있는 방법을 제안한다. 또한, 이진 영상으로부터 여러 형상의 윤곽선 시퀀스를 자동으로 추출할 수 있는 효율적인 방법도 함께 제안한다. 제안된 방법들은 형상 내부에 홀(hole)이 있는 경우에도 적용할 수 있다. 결과적으로, 윤곽선 시퀀스가 임의 형상 영역에 대한 매우 효과적인 표현이 될 수 있음을 밝힌다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.450-455
• /
• 2004

There is few research about contact problem for a rigid surface with an arbitrary shape in SPH. The variational equation based on the virtual work principle is derived and its solution is obtained by the penalty method. It is proposed a new method that can determine the parameters for a penetration and a penetration rate used in the penalty method. The reproducing condition is adopted to correct the deficiency of kernel on the boundary. In order to calculate a penetration of particles, after checking boundary particles for deformable body boundary normal vectors were determined on the rigid surface. Numerical simulations for models which have rigid surface with an arbitrary shape were conducted to validate the proposed method in 2D. The results of those analysis represent that the contact algorithm proposed in this study works properly.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.30-37
• /
• 2005

There is few research about contact problem for a rigid surface with an arbitrary shape in SPH. The variational equation based on the virtual work principle is derived and its solution is obtained by the penalty method. It is proposed a new method that can determine the parameters for a penetration and a penetration rate used in the penalty method. The reproducing condition is adopted to correct the deficiency of kernel on the boundary. In order to calculate a penetration of particles, after checking boundary particles for deformable body, boundary normal vectors were determined on the rigid surface. Numerical simulations for models which have rigid surface with an arbitrary shape were conducted to validate the proposed method in 2D Cartesian and cylindrical coordinate. The results of those analysis represent that the contact algorithm proposed in this study works properly.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.764-771
• /
• 2006

The use of 3-D finite elements for the eigen analysis of beam-like structures with arbitrary section shape may not be practical in certain cases, from the aspect of CPU time. In this connection, this paper presents a systematic algorithm for decomposing an arbitrary section into finite number of basic ones and computing essential sectional quantities required for the eigen analysis using the beam theory. The numerical accuracy of the proposed method is assesed from the comparison with the 3-D finite . element method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1523-1526
• /
• 2002

In this paper, we propose a method fur measuring the dimensions of an arbitrary object using geometric relationship between a perspective projection image and a rectangular parallelepiped model. For recognizing the vertexes of the rectangular parallelepiped surrounding an arbitrary object, the method adopts a strategy that derives the equations for vertex recognition from the geometrical relationships for image formation between 2D image and the rectangular parallelepiped model. extracts from 2D image with vertical view features (or junctions) of minimum quadrangle circumscribing an arbitrary shape object, and then recognizes vertexes from the features with the equations. Finally, the dimensions of the object are calculated from these results of vertex recognition. By the experimental results, it is demonstrated that this method is very effective to recognize the vertexes of the arbitrary objects.