• 한국진공학회지
• /
• 제19권3호
• /
• pp.206-210
• /
• 2010

RF 마그네트론 스퍼터링법을 이용하여 Al 도핑된 ZnO 박막을 Ar 유량에 따라 증착하고 박막의 다양한 특성을 연구하였다. ZnO 박막의 Ar 유량 변화를 통해 고품질 박막을 증착할 수 있었고 Al 도핑된 ZnO 박막에 대한 Ar 유량의 영향을 확인하였다. 모든 Al 도핑된 ZnO에서 80% 이상의 좋은 투과도를 보였다. Hall 측정과 X-ray photoelectron spectrometer 측정 결과, 비저항이 가장 작은 60 sccm에서 가장 작은 Al 도핑 농도를 보였다. Ar 유량에 따른 Al 도핑된 ZnO 박막에서의 전기적인 특성은 Al 도핑 농도보다 산소 공공에 의해 더 영향을 받음을 확인하였다.

• Korean Chemical Engineering Research
• /
• 제51권6호
• /
• pp.755-759
• /
• 2013

Bosch 공정의 식각 단계에서 Ar을 첨가하였을 때 Si의 식각특성을 관찰하기 위하여 식각 단계에서 $SF_6$ 플라즈마만 사용한 경우와 Ar 유속비율이 20%인 $SF_6$/Ar 플라즈마를 각각 사용하여 Si을 Bosch 공정으로 식각하였다. Bosch 공정의 식각 단계에서 $SF_6$ 플라즈마에 Ar 가스를 첨가하면 $Ar^+$ 이온에 의한 이온포격이 증가하였고 이는 Si 입자의 스퍼터링을 초래할 뿐 아니라 F 라디칼과 Si의 화학반응을 가속하였다. 그 결과 식각 단계에서 20%의 Ar이 첨가되어 Bosch 공정으로 수행된 Si의 식각속도는 Ar이 첨가되지 않은 경우보다 10% 이상 빨라졌고 식각프로파일도 더욱 비등방적이었다. 이 연구의 결과는 Bosch 공정으로 Si을 식각할 때 식각속도와 식각프로파일의 비등방성을 개선하는데 필요한 기초자료로 사용될 수 있을 것으로 판단된다.

• Applied Science and Convergence Technology
• /
• 제25권6호
• /
• pp.145-148
• /
• 2016

This paper, Al-doped ZnO(AZO) thin films for application as transparent conducting oxide films were deposited on the Corning glass substrate by using RF magnetron sputtering system. The effects of various Argon gas flow rates on optical and electrical characteristics of AZO films were investigate sputtering method. The Carrier Concentration is enhanced as Ar gas rate increases, and also the oxygen vacancy concentration. The figure of merit obtained in this study means that AZO films which deposited Ar gas rate of 75 sccm have the highest Carrier concentration and Hall mobility, which have the highest photoelectrical performance that it could be used as transparent electrodes.

• 한국표면공학회지
• /
• 제39권3호
• /
• pp.137-141
• /
• 2006

Process window for infinite etch selectivity of silicon nitride $(Si_3N_4)$ layers to ArF photoresist (PR) was investigated in dual frequency superimposed capacitive coupled plasma (DFS-CCP) by varying the process parameters such as low frequency power $(P_{LF})$, $CH_2F_2$ and $H_2$ flow rate in $CH_2F_2/H_2/Ar$ plasma. It was found that infinite etch selectivities of $Si_3N_4$ layers to the ArF PR on both blanket and patterned wafers can be obtained for certain gas flow conditions. The etch selectivity was increased to the infinite values as the $CH_2F_2$ flow rate increases, while it was decreased from the infinite etch selectivity as the $H_2$ flow rate increased. The preferential chemical reaction of the hydrogen with the carbon in the polymer film and the nitrogen on the $Si_3N_4$ surface leading to the formation of HCN etch by-products results in a thinner steady-state polymer and, in turn, to continuous $Si_3N_4$ etching, due to enhanced $SiF_4$ formation, while the polymer was deposited on the ArF photoresist surface.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.139.2-139.2
• /
• 2013

6" Multi-crystal Silicon wafer has etched suing a remote - type RF Dielectric barrier discharge (RF DBD) at atmospheric pressure. DBD source is composed of Al electrode and coated Al2O3 dielectric as function of Ar/NF3 gas combination and input power used 13.56 MHz power supply. Ar gas flow rate is changed from 2 to 10 Slm, and NF3 flow rate is changed from 0.2~1 slm. At the result, NF3 flow rate Si etching rate also increase whit the increasing of NF3 flow rate But at 2 slm etching rate was decrease. In this experience, Max etching rate is 2.3 ${\mu}m/min$ when the scan time is 45 sec.

• 한국표면공학회지
• /
• 제35권2호
• /
• pp.113-121
• /
• 2002

We have investigated insulating properties of $SiO_2$ interlayer for the thin film strain gauge, which were prepared by RF magnetron sputtering method in various deposition conditions, such as Ar pressure, gas flow rates and sputtering gases. SEM, AFM and FT-IR techniques were used to analyze its structures and composition. As the Ar pressure and the flow rate increased, the insulating interlayer showed low insulating resistance due to its porous structure and defects. Oxygen deficiency in $SiO_2$ was decreased as fabricated by hydrogen reactive sputtering. We could enhance the surface mobility of sputtered adatoms by using Ar/$H_2$ sputtering gas and obtain a good surface roughness and insulating property. The optimum insulating resistance of 9.22 G$\Omega$ was obtained in Ar/30% $H_2$ mixed gas, flow rate 10sccm, and 1mTorr.

• Transactions on Electrical and Electronic Materials
• /
• 제10권6호
• /
• pp.203-207
• /
• 2009

We have investigated the effect of ambient gases on the structural, electrical, and optical characteristics of ITO thin films intended for use as anode contacts in OLED (organic light emitting diodes) devices. These ITO thin films are deposited by radio frequency (RF) magnetron sputtering under different ambient gases (Ar, Ar+$O_2$, and Ar+$H_2$) at $300{^{\circ}C}$. In order to investigate the influences of the oxygen and hydrogen, the flow rate of oxygen and hydrogen in argon mixing gas has been changed from 0.5 sccm to 5 sccm and from 0.01 sccm to 0.25 sccm, respectively. The intensity of the (400) peak in the ITO thin films increased with increasing $O_2$, flow rate whilst the (400) peak was nearly invisible in an atmosphere of Ar+$H_2$. The electrical resistivity of the ITO thin films increased with increasing $O_2$ flow rate, whereas the electrical resistivity decreased sharply under an Ar+$H_2$ atmosphere and was nearly similar regardless of the $H_2$ flow rate. The change of electrical resistivity with changes in the ambient gas composition was mainly interpreted in terms of the charge carrier mobility rather than the charge carrier concentration. All the films showed an average transmittance of over 80% in the visible range. The OLED device was fabricated with different ITO substrates made with the configuration of ITO/$\alpha$-NPD/DPVB/$Alq_3$/LiF/Al in order to elucidate the performance of the ITO substrate. Current density and luminance of OLED devices with ITO thin films deposited in Ar+$H_2$ ambient gas is the highest among all the ITO thin films.

• 한국세라믹학회지
• /
• 제40권12호
• /
• pp.1165-1169
• /
• 2003

이중 이온빔 스퍼터링(Dual ion-beam sputtering)을 사용하여 보조이온건의 Ar/O$_2$가스유량 변화에 따라 Si-(III) 기판과 glass에 Ta$_2$O$_{5}$ 박막을 증착시켰다. 보조 이온총의 산소 가스량의 비가 감소함에 따라서 증착되는 Ta$_2$O$_{5}$ 박막의 성장속도는 감소하였으며, 굴절률은 $O_2$ 가스의 양이 0∼12sccm인 범위에서 2.09(at 1550nm)로 일정한 값을 나타내었다. Ar:O$_2$가 3: 12인 조건에서 화학양론 조성인 Ta$_2$O$_{5}$를 형성하였으며, 표면 거칠기도 가장 작은 값을 나타내었다.나타내었다.

• 한국주조공학회지
• /
• 제32권6호
• /
• pp.276-283
• /
• 2012

This study presents the results on the changes of crucible thermal conductivity and inflow of Ar, and constructed the mathematical model about heat transfer into furnace. As process variables, simulation model was designated thermal conductivity of crucible to $0.5W{\cdot}m^{-1}{\cdot}K^{-1}$, $1W{\cdot}m^{-1}{\cdot}K^{-1}$, $2W{\cdot}m^{-1}{\cdot}K^{-1}$, $4W{\cdot}m^{-1}{\cdot}K^{-1}$, and inflow rate of Ar to 15 L/min, 30 L/min, 60 L/min. Initial condition and boundary condition were set respectively in two terms of process. Each initial conditions were set up by the preceding simulation of heat and fluid flow. The primary goal is the application of unidirectional growth of Si ingot using the result. In the result of the change of heat conductivity of crucible, the higher thermal conductivity of crucible shows the shorter solidification time and the bigger temperature difference. And the flow patterns are changed with the inflow rate of Ar. Finally, we found that the lower crucible's thermal conductivity, the better crucible is at polycrystalline Si ingot growth. But in case of Ar inflow, it is hard to say about good condition. This data will be evaluated as useful reference used in allied study or process variable control of production facilities.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 춘계학술발표대회
• /
• pp.717-720
• /
• 2011

고속 네트워크 환경에서 AR UDT(Adaptive Rate control UDT)는 표준 전송 프로토콜인 TCP에 비해 뛰어난 성능을 보인다. UDT(UDP-based Data Transfer)를 기반으로 하는 AR UDT의 혼잡제어는 네트워크 상태를 예측하여 패킷 간 전송시간을 변화시킴으로써 기존 UDT보다 향상된 성능을 보인다. 그러나 AR UDT는 네트워크 상태 예측의 오차가 클 뿐만 아니라 rate control만을 공격적으로 조절하기 때문에 수신 버퍼의 초과로 인해 안정적인 성능을 기대하기 어렵다. 본 논문에서는 AR UDT환경에서 네트워크 상태에 따라 적응적으로 혼잡제어를 하는 기법을 제안한다. RTT(Round Trip Time)의 변화량에 따라 네트워크 상태를 예측하여 flow control과 rate control을 적응적으로 조절한다. 네트워크 시뮬레이션 결과를 통하여 AR UDT에 비해 전송속도와 안정성이 향상되었음을 보였다.