• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.29-35
• /
• 2011

This research proposes the suitable method for estimating the future probable rainfall based in 2100 on the observed rainfall data from main climate observation stations in Korea and the rainfall data from the A1B climate change scenario in the Korea Meteorological Administration. For all those, the frequency probable rainfall in 2100 was estimated by the relationship between average values of 24-hours annual maximum rainfalls and related parameters. Three methods to estimate it were introduced; First one is the regressive analysis method by parameters of probable distribution estimated by observed rainfall data. In the second method, parameters of probable distribution were estimated with the observed rainfall data. Also the rainfall data till 2100 were estimated by the A1B scenario of the Korea Meteorological Administration. Last method was that parameters of probable distribution and probable rainfall were estimated by the A1B scenario of the Korea Meteorological Administration. The estimated probable rainfall by the A1B scenario was smaller than the observed rainfall data, so it is required that the estimated probable rainfall was calibrated by the quantile mapping method. After that calibration, estimated probable rainfall data was averagely became approximate 2.3 to 3.0 times. When future probable rainfall was the estimated by only observed rainfall, estimated probable rainfall was overestimated. When future probable rainfall was estimated by the A1B scenario, although it was estimated by similar pattern with observed rainfall data, it frequently does not consider the regional characteristics. Comparing with average increased rate of 24-hours annual maximum rainfall and increased rate of probable rainfall estimated by three methods, optimal method of estimated future probable rainfall would be selected for considering climate change.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.107-119
• /
• 2021

Recently, interest in remodeling apartment houses has been increasing due to problems such as a lack of parking spaces for old apartment houses. However, no method was suggested to predict the construction period of the apartment remodeling project. Unlike general apartment new construction, apartment remodeling construction involves demolition or reinforcement work, so a realistic remodeling construction period calculation plan differentiated from the existing construction period should be proposed. Therefore, this study intends to present a model for deriving the construction period of the underground parking lot of the apartment remodeling construction. Each construction period was calculated based on 19 activities of underground parking lot remodeling work through review of previous studies and expert advice. Activity's workload data and productivity data were derived to calculate the construction period, and the number of inputs and equipment inputs by Activity were determined to correct the productivity data. The construction period of Activity was calculated using the derived data, and the criteria for calculating the overlapping period for each Activity were presented to enable realistic construction period and scheduled schedule. As a result of predicting the accuracy of the construction period through the verification of the case complex, it is expected that it will be possible to predict the approximate construction period of the underground parking lot of the apartment remodeling construction in the future.

• The Korea Journal of Herbology
• /
• v.36 no.5
• /
• pp.109-115
• /
• 2021

Objectives : 'Johyun' yulmoo which is a new variety of Coix lacryma-jobi var. ma-yuen Stapf sprout was developed and registered by Rural development administration in 2004. This variety was derived from the cross between single cross of Suwon-6 and Okayama and UCN300-25 as F1. It is characterized by early maturity, short plant height, a strong resistance, and a superior yield and is suitable for the central and northern regions. Accordingly, we were performed and evaluated single oral dose toxicity test of 'Johyun' yulmoo sprout (JYS) in Sprague-Dawley (SD) rats. Methods : Single oral dose toxicity test was performed using with male and female rats. Rats were divided into two groups: Group 1, vehicle-treated rats (Control); Group 2, JYS 5000 mg/kg-treated rats. JYS was orally administered to male and female rats at dose levels of 5000 mg/kg. Animals were monitored on the mortality, clinical signs, body weight changes, and necropsy findings for 14 days. groups : Group 1, vehicle-treated rats (Control); Group 2, JYS 5000 mg/kg-treated rats. JYS was orally administered to male and female rats at dose levels of 5000 mg/kg. Animals were monitored on the mortality, clinical signs, body weight changes, and necropsy findings for 14 days. Results : After oral treatment of JYS, we could not find any mortality at 5000 mg/kg. Compared with the control group, there were also no significant differences in clinical sign, weight changes, weight gain, and gross abnormalities in JYS 5000 mg/kg-treated group. Conclusions : Taken together, these results suggest that approximate lethal dose of JYS was considered as over 5000 mg/kg. Results from this study provide scientific evidence for the safety of JYS. Moreover, this study could be used as a basis for dose-setting data of the repeated dose 13-week oral toxicity test of JYS.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.557-568
• /
• 2018

The manufacturing techniques were studied by investigating a precise analysis on wall structure, features of materials and the painting layer of the bracket mural paintings at Daeungbojeon Hall in Naesosa temple. The wall frame is a single-branch structure, and The mural paintings are composed of 3 layers which are a support layer, a finishing layer and a painting layer. The support layer and the finishing layer are an earth wall that sand and clay such as Quartz, Feldspar, and etc. are mixed. The support and the finishing layers have a combination of medium particle sand and smaller than fine particle sand in the approximate ratios of 0.8:9.2 and 6:4, respectively. Therefore, the aforementioned ratio of sand with medium or large particles is relatively higher in the finishing layer than the support layer. As a result of a precise analysis on the painting layer, it has a relatively thick ground layer for painting which is maximum $456.15{\mu}m$ by using Celadonite or Glauconite and the paintings were colored by using pigments such as Atacamite, Kaolinite or Halloysite, Oxidized steel, and etc. on it. The manufacturing style and the painting techniques of an earth wall are included in the category of the Joseon Dynasty style that have been studied up to now, but the facts that the finishing layer has a high content of sand and a middle layer and chopped straw have not been identified. These are remarkable points in terms of structure and materials, and can be crucial in the evaluation of the state of conservation of mural paintings or preparation of a conservation plan.

• Journal of Conservation Science
• /
• v.35 no.2
• /
• pp.177-186
• /
• 2019

A Termiticide that is applied to the soil treatment method, one of the methods for preventing termites in Korea's wooden cultural properties, will be subjected to the leaching of the effective ingredient in treated soil by the moisture behavior of rain. As a result, termiticide is deteriorated and needs to be reprocessed, but the standards and evaluation methods are nonexistent in korea. Accordingly, a basic indoor evaluation measure was proposed for the evaluation of the effectiveness of the termiticide chamber and the calculation of the reprocessing period. First, avoidance and contact toxicity were assessed at two concentrations of the same termiticide as a method for assessing termiticide suitability. The evaluation of mortality revealed that the soil termiticide used in this experiment was non-repellent, and that death from contact was confirmed. Afterwards, artificial rainfall and soil penetration tests were conducted to determine efficacy of termiticide in soil and the approximate reprocessing period was calculated by comparing the weather data. Persistence evaluation revealed perforation by termites after continuous water exposure of more than about 160 to 170mm of water injection condition. Based on the results, compared with weather data for the last five years, the termiticide of concentration used in this experiment is expected to remain effective for about one year if treated after September. The purpose of this study was to provide basic data for the establishment of a manual for the selection of termiticide for soil treatment by calculating the efficacy for termite mortality and the duration of the leaching effectiveness by water behavior in soil.

• Korean Journal of Radiology
• /
• v.19 no.6
• /
• pp.1066-1076
• /
• 2018

Objective: The reliability of size measurements of liver metastases from neuroendocrine tumors (NETs) on contrast-enhanced computed tomography (CT) phases made by different readers may be hampered due to transient, variable rim enhancement in arterial phase (AP) or portal venous phase (PVP) images. We aimed to assess the reliability of tumor size measurements in pre- and post-contrast scans. Materials and Methods: The study coordinator selected target lesions according to Response Evaluation Criteria in Solid Tumors 1.1 guidelines in 44 consecutive patients with pathologically confirmed NET liver metastases. Two blinded readers measured the longest diameters of target lesions on pre-contrast, AP, and PVP images twice with a 4-week interval. Inter- and intra-observer agreements were evaluated using Bland-Altman plots and 95% limit of agreement (LOA) calculations. Results: Of the 79 target lesions (approximate mean size of 3 cm), 45 showed rim enhancement. Inter-observer agreement assessed based on LOA was highest in pre-contrast CT images (-6.1-5.7 mm), followed by PVP (-7.9-7.1 mm) and AP (-8.5-7.4 mm) images. Intra-observer agreement showed the same trend: -2.8-2.9 mm and -2.9-2.9 mm for readers 1 and 2, respectively, on pre-contrast CT, -2.8-2.9 mm and -3.0-3.2 mm, respectively, on PVP, and -3.2-4.2 mm and -3.4-3.2 mm, respectively, on AP images. Mean tumor diameters differed significantly among the phases in the following increasing order: pre-contrast CT, PVP, and AP images. Conclusion: There was better inter- and intra-observer agreement in size measurements of NET liver metastases on pre-contrast scans than on AP and PVP scans. Pre-contrast CT may be the optimal for measuring NET liver metastases if its accuracy is proven.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.1
• /
• pp.148-165
• /
• 2015

Iron was one of the most influential factors for formation and development of ancient countries. The diffusion of ironware had increased agricultural productivity and brought about military technical revolution. Needless to say, the rise and fall of the countries depended on the possession of stable iron production. Raw materials and fuels are the key factors for mass production of iron and a transportation route is essential to supply the goods. Jungwon area satisfies the three factors. There are many iron manufacture sites such as Jincheon Seokjang-ri Gusan-ri, and Chunju Chilgeum-dong Tangeumdae earthen ramparts in the Jungwon area. In order to study the ancient iron manufacture technique, reconstitution experiment was carried out using restored furnace which was made based on the Jincheon Seokjang-ri B-23 furnace. Some notable results were identified with the experiment as in the followings. Firstly, a roasting process has a connection with the decrease of hardness of the iron ore. Secondly, melting of the blast pipe as well as the formation of product within the furnace had a crucial effect on the cessation of the experiment. Thirdly, reduced iron in various locations within the furnace prove that there was enough reducing environment during the working. Not only melting point but also properties of iron can vary depending on the carbon contents. For the reason, formation of approximate environment in which iron can react to the chalcoal is the most important factor in terms of iron manufacture.

• Journal of Internet Computing and Services
• /
• v.19 no.6
• /
• pp.1-7
• /
• 2018

This paper present an 8kbps ACLMS-MPC(Amplitude Compensation and Least Mean Square - Multi Pulse Coding) coding method integrated with ACFBD-MPC(Amplitude Compensation Frequency Band Division - Multi Pulse Coding) and LMS-MPC(Least Mean Square - Multi Pulse Coding) used V/UV/S(Voiced / Unvoiced / Silence) switching, compensation in a multi-pulses each pitch interval and Unvoiced approximate-synthesis by using specific frequency in order to reduce distortion of synthesis waveform. In integrating several methods, it is important to adjust the bit rate of voiced and unvoiced sound source to 8kbps while reducing the distortion of the speech waveform. In adjusting the bit rate of voiced and unvoiced sound source to 8 kbps, the speech waveform can be synthesized efficiently by restoring the individual pitch intervals using multi pulse in the representative interval. I was implemented that the ACLMS-MPC method and evaluate the SNR of APC-LMS in coding condition in 8kbps. As a result, SNR of ACLMS-MPC was 15.0dB for female voice and 14.3dB for male voice respectively. Therefore, I found that ACLMS-MPC was improved by 0.3dB~1.8dB for male voice and 0.3dB~1.6dB for female voice compared to existing MPC, ACFBD-MPC and LMS-MPC. These methods are expected to be applied to a method of speech coding using sound source in a low bit rate such as a cellular phone or internet phone. In the future, I will study the evaluation of the sound quality of 6.9kbps speech coding method that simultaneously compensation the amplitude and position of multi-pulse source.

• Journal of Korean Society on Water Environment
• /
• v.34 no.6
• /
• pp.632-641
• /
• 2018

Algal dynamics is controlled by multiple environmental factors such as flow dynamics, water temperature, trophic level, and irradiance. Underwater irradiance penetrating from the atmosphere is exponentially decreased in water column due to absorption and scattering by water molecule and suspended particles including phytoplankton. As the exponential decrease in underwater irradiance affects algal photosynthesis, regulating their spatial distribution, it is critical to understand the light extinction characteristics to find out the mechanisms of algal dynamics more systematically. Despite the significance, the recent data have been rarely reported in the main stream areas of large rivers, Korea. In this study, the euphotic depths and light extinction coefficients were determined by monitoring the vertical variation of underwater irradiance and water quality in the main channel of Nakdong River near Dodong Seowon once a week during summer of 2016. The average values of euphotic depth and light extinction coefficient were 4.0 m and $1.3m^{-1}$, respectively. The degree of light extinction increased in turbid water due to flooding, causing an approximate 50 % decrease in euphotic depth. Also, the impact was greater than the self-shading effect during the periods of cyanobacterial bloom. The individual light extinction coefficients for background, total suspended solid and algal levels, frequently used in surface water quality modeling, were determined as $0.305m^{-1}$, $0.090m^{-1}/mg{\cdot}L^{-1}$, $0.013m^{-1}/{\mu}g{\cdot}L^{-1}$, respectively. The values estimated in this study were within or close to the ranges reported in literatures.

• Korean Journal of Food Science and Technology
• /
• v.51 no.3
• /
• pp.214-220
• /
• 2019

Four rice varieties (Boseogchal for waxy, Baegjinju for medium-waxy, and Seolgaeng and Haiami for non-waxy) were milled to 2% degree of milling (DOM), and physicochemical and sensory properties of 2% milled rice (2% MR) were compared to those of brown rice (BR). No significant differences in the approximate compositions of BR and 2% MR were observed, whereas the grain color of 2% MR was slightly brighter than that of BR. For all varieties, water absorption ratio of BR was significantly increased by milling. The pasting properties of rice varied significantly depending on the variety, but there was no significant difference in peak and through viscosities between BR and 2% MR. Analysis of the texture of cooked rice showed that milling to 2% DOM caused a significant decrease in hardness, but an increase in adhesiveness and stickiness. Cooked Seolgaeng 2% MR scored significantly higher in the sensory evaluation than the corresponding BR. These results suggest that 2% DOM would be useful for improving the sensory properties of cooked non-waxy rice.