• 제목/요약/키워드: Appropriate technology

검색결과 5,597건 처리시간 0.041초

행정서비스 활용을 위한 디지털 트윈 정책 연구 (Research on the Digital Twin Policy for the Utilization of Administrative Services)

  • 옥진아;유순덕;정효진
    • 한국인터넷방송통신학회논문지
    • /
    • 제23권3호
    • /
    • pp.35-43
    • /
    • 2023
  • 본 연구의 목적은 행정서비스 활용을 위한 디지털 트윈 정책 연구이다. 본 연구는 1,000명의 대상을 기반으로한 모바일 설문조사를 통해 진행되었으며 그 연구 결과는 다음과 같다. 첫쨰, 디지털 트윈을 활용하기 위해 경기도 측면에서 적용할 수 있는 적절한 서비스 발굴이 선행되어야 한다. 경기도의 현장 업무에 적절한 디지털 트윈 서비스 발굴 시도가 우선적으로 선행되고 이를 통한 업무의 효율성 증진이 필요하다. 둘쨰, 경기도 디지털 트윈 행정서비스는 중앙정부 사업과의 중복성은 방지하고 연계 활용 가능한 모델을 구축해야 하며, 도와 시군의 현안 연관성이 높고 수요자 즉 도민이 원하는 행정서비스를 중심으로 추진되어야 한다. 셋쨰, 행정서비스 운영방식은 경기도의 디지털 트윈 행정서비스 개발을위해서 시범사업 참여를 통한 표준모델 구축 방안을 검토해야 한다. 사업 추진 방식으로 경기도가 주관기관이 되어, 협약사업 방식으로 추진하고, 경기도 디지털 트윈 자문위원단을 통해 사업 추진 전반에 대한 지원 체계를 마련하라는 것을 제언하고자 한다. 넷째, 전담부서와 행정서비스 구축, 운영, 관리 등을 위한 관련 제도 마련이 되어야 한다. 경기도에서 디지털 트윈 실현을 위해서는 사업 추진 및 운영과 법·제도적 개선을 위한 다양한 역할을 수행 할 수 있는 전담 조직이 필요하며, 전담 조직 지정을 위해서 기존 부서의 확대 개편 방안과 신설 부서 운영에 대한 검토가 필요하다. 본 연구의 한계 요인은 경기도 중심의 참여자들에 대한 조사로서 향후에는 전국을 기반으로 연구하는 것을 제언한다. 본 연구의 기대효과는 디지털 트윈 서비스를 공적인 업무를 적용시 활용할 수 있는 기초 자료로 이용할 수 있다.

양액의 NO3- 비율이 수경재배 참외의 생육과 수량에 미치는 영향 (Evaluation of Cultivation Characteristics according to NO3- Ratio of Nutrient Solution for Korean Melon in Hydroponic Culture)

  • 원도연;최지혜;백창현;박나윤;강민구;서영진
    • 생물환경조절학회지
    • /
    • 제32권3호
    • /
    • pp.249-255
    • /
    • 2023
  • 참외는 동북아시아 지역에서 대부분 재배되고 있고, 한국에서 주로 생산되는 과일로서 단위면적당 수확량은 지속적으로 향상되고 있지만 재배방식은 토경재배에 국한되어 있기 때문에 규모화, 생력화를 위한 수경재배 기술 개발이 필요하다. 본 연구에서는 보온부직포를 이용한 수경재배로 참외를 재배할때 영양생장기 배양액 내 질산태질소 비율에 따른 참외 생육의 변화를 확인했다. 배양액에서 질산태질소 비율이 증가할수록 초장은 길어지고, 엽장, 엽폭, 절간장도 함께 증가하였다. 생육 30일차의 SPAD값은 질산태질소 비율이 증가할수록 감소하였다. 질산태질소 비율에 낮을수록 암꽃 개화가 빨리 되었고, 과실 성숙에서는 처리 간 차이가 없었다. 질산태질소 비율에 따른 과실의 형태는 차이가 없었고, 경도는 질산태질소의 비율이 낮을수록 높아 과실이 단단하였다. 3월에서 7월까지 총 수확량은 KM3 5,650kg/10a, KM1 4,439kg/10a로 KM3가 27% 높았고 특히, 참외 가격이 높은 3월에서 5월까지 수량은 KM3가 KM1보다 36% 높았다. 따라서 12월 정식되어 봄철부터 생산되는 참외의 수경재배에 적합한 질산태질소는 6.5-10me·L-1 수준으로 공급하는 것이 적당할 것으로 판단되었다.

베트남 람동성의 농업현황 및 한-벳 ODA 농업협력사업 전략 (Agricultural Status of Lam Dong Province in Vietnam and the Strategy for Korea-Vietnam ODA International Cooperation Program in Agriculture)

  • 조준형;장혜리;임종민;이석영;김완석
    • 한국국제농업개발학회지
    • /
    • 제23권5호
    • /
    • pp.465-474
    • /
    • 2011
  • 베트남의 중앙고원 농업생태지역에 속하는 람동성 달랏의 농업환경은 다른 저지대 농업 환경과는 매우 다르다. 산림지대인 람동성은 식물다양성이 풍부한 지역이다. 람동성은 다년생작물의 경작지가 가장 많으나, 일년생작물만을 놓고 보면 신선채소류의 경작지와 생산량이 람동성 전체의 38%(36,552ha)와 72%(993,082MT)로 가장 높다. 특히 행정도시인 달랏의 경우 베트남 경제특구인 호치민과 가까워 비교적 소득이 높은 양배추와 배추 등 신선채소류와 국화, 장미, 거베라, 난 등 화훼류가 주로 생산된다. 달랏의 경우 전체 경작지 면적의 64%인 8,447ha가 일년생작물의 생산에 그리고 36%인 4,777ha가 다년생작물을 재배하는데, 신선채소류의 생산량은 213,478MT으로 람동성 전체 신선채소류 생산량의 약 21.5%에 해당한다. 따라서 한국, 대만, 일본, 프랑스, 네델란드 등 다양한 국가에서 화훼류, 신선채소류, 차 등의 생산과 수출을 목적으로 달랏의 농업 분야에 투자하고 있다. 또한 2009년 달랏의 화훼경작지 면적은 람동성 전체 화훼류 경작지 면적의 55%를 넘으며, 국화, 장미, 백합, 카네이션, 난류, 거베라 등이 주로 생산되는데, 최근 6년 평균 연간 수출액 97억 달러로 화훼류를 제외한 람동성 전체 농업생산액 보다 높다. 따라서 람동성 및 달랏의 농업환경을 고려한 ODA 국제농업협력사업 전략은 다음과 같다. 첫째, 현지 지역의 농업환경 및 여건에 적합한 원예, 화훼, 및 특용작물 생산을 위한 농업기술과 시설지원이 함께 이루어져야 하며, 둘째, 대상지역에 기반을 둔 기업들과 연계한 농업발전체계를 구축해야 한다. 또한 향 후 ODA 국제농업협력사업은 공여국과 수혜국의 상생적 발전을 위한 방향으로 추진되어야 하는데, 최근 한국의 경제 발전에 따른 원예 및 화훼류의 소비가 급증하고 있고, 중국과 대만 등으로부터 수입되는 원예 및 화훼류의 수입단가가 높아지고 있는 점을 고려한다면, 람동성 달랏지역을 원예 및 화훼류의 생산기지로 적극 활용할 필요가 있다.

Production and Quality Parameters of Oat Grown in Conventional/Organic Farming

  • Petr Konvalina;Ivana Capouchova
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.19-19
    • /
    • 2022
  • Hulled and naked oat is a perspective crop for the low input production systems due to its low requirements for soil quality and nutrition. Oats have good competitive ability against weeds and can provide appropriate yield in organic farming in comparison with other cereal species such as wheat or barley. It is a perspective crop from the point of view of use in the food industry too. The aim of our study was to compare the production and quality parameters of naked and hulled oat grown in both organic (OF) and conventional fields (CF). Small plot trials were conducted in two locations in the Czech Republic (České Budějovice, Prague) for four years (2018-2021) in two production systems (OF, and CF). We used four varieties of hulled oat (Korok, Kertag, Raven, Seldon) and one variety of naked oat (Patrik). During the vegetation, agronomically important data were recorded. After harvest samples were processed in the laboratory and analyzed selected quality parameters of grain dry matter (the protein content was determined by the Kjeldahl method, starch content in grain according to Ewers, fat content in grain dry matter by the modified method according to Soxhlet, and ash content in grain dry matter). The data were evaluated using the program STATISTICA version 13.2, StatSoft, Inc., California, USA. It is clear from the results that the number of panicles before the harvest was influenced by the location, cultivation system, year, and, to a lesser extent, the influence of the variety. The number of panicles in OF averaged 340 per square meter, which was 90% of the value of CF. For thousand grain weight (TGW), a significantly predominant effect of year was found. The independent effect of location on TGW was statistically not significant. Grain yield was predominantly influenced by cultivation system and location. In OF, it reached an average of 3.97 t.ha-1, which was 75% of the yield of CF. As part of the evaluation of the basic grain quality indicators, the content of protein, starch, fat, and ash in the dry matter of the grain was evaluated. The content of protein in the dry matter of the grain was predominantly influenced by year, followed by the influence of the variety and a fairly comparable influence of the cultivation system and locality. On average, it achieved 16.05% in OF and 17.01% in CF. The starch content was then related to the protein content, where as a result of the lower protein content in the grain of OF oats, the content of starch and fat was on the contrary increased. The year turned out to be the most significant factor, affecting both the starch content in the dry matter of the grain and the fat content. This was followed again by a fairly comparable influence on the cultivation system and locality. The influence of the cultivation system and location was not statistically significantly applied in the case of ash content in dry matter. Based on our results we can propose both types of oat (hulled and naked) as perspective crops for OF. An organic farmer can expect to achieve stable yields which, in less favorable conditions for the production of cereals in the OF, may be close to the level of conventional yields. In the future, it will be important to change agrotechnology in OF and increase oat yield because this crop has a good potential to grow in areas with low nitrogen input or less fertile soil.

  • PDF

주요국 정책을 통한 중소 제조기업의 디지털 전환 추진 방향 모색 (The Study on Improvement of the Digital Transformation of Small and Medium-Sized Manufacturing Industries through Foreign Countries)

  • 안정인
    • 벤처혁신연구
    • /
    • 제5권4호
    • /
    • pp.109-115
    • /
    • 2022
  • 본 연구는 주요국 정책을 토대로 중소 제조기업의 디지털 전환 현황과 문제점을 진단하고, 이에 대응하기 위한 개선방안을 제시하고자 한다. 디지털 전환은 비대면 경제 및 디지털 기술에 대한 요구가 부상하면서 산업 패러다임이 변화하였다. 이에 주요국들은 디지털 전환 관련 정책을 추진중에 있으며, 우리나라도 한국형 뉴딜 정책을 시행중에 있다. 다만, 한편, 우리나라는 주요국의 디지털 전환 정책 전략을 그대로 차용하고 있어 우리의 강점 활용 및 단점 보완을 할 수 있는 한국형 모델이 결핍되어 있다. 따라서 한국의 독자적인 표준화 작업이 시급히 진행되어야 한다. 또한 기존에는 스마트공장 보급 및 확산, 즉 양적 정책에 초점이 맞춰서 진행되었다면, 앞으로는 데이터의 활용 및 성과창출을 지향할 수 있는 질적 정책으로의 전환이 필요하다. 즉, 스마트공장 지원정책의 고도화 정책을 통하여 질적 수준을 제고시킬 수 있는 정책적 보완이 필요하다. 이에 사업의 유기적인 연계와 효율적 지원을 위하여 기관별로 추진하고 있는 정책을 공유할 필요가 있다. 따라서 사업의 유기적인 연계와 효율적 지원을 위하여 기관별로 추진 중인 정책을 공유할 필요가 있다. 중소기업의 디지털 전환에 대한 인식 수준을 제고하고 중장기적으로 기술 및 솔루션 개발을 지원해야 한다. 따라서 향후 중소 제조기업의 디지털 전환 정책은 중소기업의 질적 수준시킬 수 있는 방안을 모색할 필요가 있다는 것을 제시함 점에서 실무적인 의의가 있다.

스포츠 분야 사회적기업의 모델 탐색: 조직형태 및 과제 (Exploring the Model of Social Enterprise in Sport: Focused on Organization Form(Type) and Task)

  • 박상현;박주영
    • 산업융합연구
    • /
    • 제22권2호
    • /
    • pp.73-83
    • /
    • 2024
  • 이 연구의 목적은 스포츠 분야 사회적기업을 둘러싸고 발생하는 여러 문제점들을 조직의 관점에서 진단하고 필요한 과제 및 시사점을 도출하는 데 있다. 연구의 목적을 달성하기 위해 크게 세 가지 단계로 구분하여 연구를 진행, 결과를 도출하였다. 첫 번째로는 스포츠 분야 사회적기업의 주요 현황 및 특성 등에 대하여 살펴보았다. 배경 및 기원, 법제 및 정책, 조직목표, 조직구조 및 절차, 조직특성 등의 측면을 중심으로 현황을 분석하였다. 스포츠 분야 사회적기업은 초기단계로서 정부의 사회적기업 정책목표는 재정투입을 통해 단기간 내 사회적기업의 수를 늘리는 것에 초점을 맞추는 경향이 있었다. 그리고 개별 기업들의 수익창출 여력이 미흡하여 정부의 보조금 지원에 의존하는 경우가 대다수인 것으로 파악되었다. 두 번째 단계에서는 스포츠 분야 사회적기업의 기능수행에 영향을 미치는 상황적 요인에 대하여 중점적으로 살펴보았다. 상황적 요인인 조직의 가치와 이념, 기술, 역사 등을 검토한 결과, 스포츠 분야 사회적기업으로 인증 받아 중앙정부나 지방자치단체로부터 지원을 받는 경우 정치적 통제는 어느 정도 강하고 시장에 노출 정도는 심하지 않은 '관청형' 조직의 형태로 나타나는 것을 도출할 수 있었다. 마지막 세 번째 단계에서는 스포츠 분야 사회적기업에 적정한 조직의 형태를 갖추기 위한 과제 및 시사점을 도출하였다. 스포츠 분야 사회적 기업 생태계가 어느 정도 정착된 이후에는 현재의 '관청형' 조직에서 '국민기업' 조직으로 점차 나아갈 필요가 있다. 이는 정부의 제한된 재정 수준을 감안해서도 그러하며, 단기적인 생존이 아니라 장기적으로 스포츠 분야 사회적기업이라는 조직이 살아남을 수 있기 위해서도 그러한 것이다.

인공위성 원격 탐사 정보가 자료 기반 모형의 미계측 유역 하천유출 예측성능에 미치는 영향 분석 (Analysis of the Impact of Satellite Remote Sensing Information on the Prediction Performance of Ungauged Basin Stream Flow Using Data-driven Models)

  • 서지유;정하은;원정은;최시중;김상단
    • 한국습지학회지
    • /
    • 제26권2호
    • /
    • pp.147-159
    • /
    • 2024
  • 부족한 하천유출 관측 데이터는 모델 보정 작업을 어렵게 만들어 모델의 성능 향상을 제한한다. 위성 기반 원격탐사 자료는 수문 관련 데이터의 확보에 적극적으로 활용될 수 있으므로 새로운 대안이 될 수 있다. 최근에는 여러 연구를 통하여 기존의 개념적/물리적 모델보다는 인공지능을 이용한 해법이 더 적절하다는 평가를 받고 있다. 본 연구에서는 다양한 순환 신경망들과 의사결정나무 기반 알고리즘들을 결합한 자료 기반 접근 방식을 제안하였다. 또한 인공지능 학습을 위하여 인공위성 원격탐사 정보의 활용성을 조사하였다. 본 연구에서 위성영상은 MODIS와 SMAP의 자료가 사용된다. 공적으로 공개된 25개 유역의 자료를 사용하여 제안된 접근 방식을 검증하였다. 전통적인 지역화 접근법에서 착안하여 모든 유역의 자료를 통합하여 하나의 자료 기반 모델을 학습하는 전략을 채택하였으며, Leave-one-out cross-validation 지역화 설정을 이용하여 하나의 모델이 다양한 유역의 하천유출을 예측함으로써 제안된 접근 방식의 잠재력을 평가하였다. GRU + Light GBM 모델이 대상 유역에 적합한 모델 조합으로 판명되었으며(25개 미계측 유역 일 하천유량 예측 모형효율계수 평균 0.7187) 하천유출이 매우 작은 시기를 제외하면 우수한 미계측 유역의 하천유출 예측 성능을 보여주었다. 인공위성 원격탐사 정보의 영향력은 최대 10% 정도로 파악되었으며, 위성 정보의 추가 적용이 풍수기 또는 평수기보다는 저수기 또는 갈수기의 하천유출 예측에 더 큰 영향을 미쳤다.

PET/CT 영상 획득 시 사전설정법 차이에 따른 영상 질 평가 (Evaluation of the Image Quality According to the Pre-set Method in PET/CT Image)

  • 박선명;이혁;홍건철;정은경;최춘기;석재동
    • 핵의학기술
    • /
    • 제15권2호
    • /
    • pp.41-46
    • /
    • 2011
  • 영상장치를 이용한 검사 시 영상의 질은 검사결과와 밀접하게 연관되어 있으며, 이는 영상획득 조건들과 이에 대한 평가방법으로 인해 달라 질 수 있다. 본 연구에서는 영상획득 시 사전설정법(Pre-set method)차이에 따른 영상의 질을 평가하였다. 장비는 PET/CT Discovery STe16(GE Healthcare, Milwaukee, USA)을 사용하였으며, Chest PET Phantom (실험 1)과 94 NEMA Phantom (실험 2)을 이용하였다. 실험 1의 경우 3.5, 6.0, 8.6 kBq/mL, 실험 2의 경우는 3.3, 5.5, 7.7, 9.9, 12.1, 16.5 kBq/mL의 $^{18}F$-FDG를 채웠고, 열소와 배후방사능과의 방사능 농도는 4:1의 비율을 유지하였다. 각 실험은 CT 투과촬영 후 3D로 2분 30초/프레임으로 시간설정법(Time-set method)과 1억 계수의 계수설정법 (Count-set method)을 적용하여 방출촬영 하였다. 영상의 질에 대한 평가는 잡음 등가 계수율 (Noise Equivalent Count Rate, NECR)과 신호 대 잡음비 (Signal to Noise Ratio, SNR)를 이용하였다. 실험 1에서 NECR과 SNR은 방사능 농도의 증가에 따라 시간설정법에서 53.7, 66.9, 91.4 과 7.9, 10.0, 11.7로 평가 모두에서 증가함을 보였으나, 계수설정법은 53.8, 69.1, 97.8과 14.1, 14.7, 14.4로 SNR은 NECR과 다르게 증감현상을 보이지 않았다. 또 다른 모형실험인 실험 2에서도 NECR과 SNR은 방사능 농도가 증가에 따라 시간설정법에서 45.1, 70.6, 95.3 115.6 134.6 162.2 과 7.1, 8.8, 10.6, 11.5, 12.7, 14.0으로 증가함을 보였으나, 계수설정법에서는 42.1 67.3 92.1 112.2 130.7 158.7 과 15.2, 15.9, 15.6, 15.4, 15.5, 14.9로 실험 1에서와 마찬가지로 SNR에서는 증감현상을 보이지 않았다. 사전설정법 변화와 관계없이 단위 질량당 방사능량 증가는 영상의 질도 비례하여 향상된다. 그러나 동일한 단위 질량당 방사능량에서는 영상획득의 시간을 늘려 총계수값을 증가시켜도 NECR에 영향을 주지는 않는다. 이는 NECR을 이용한 영상 질 평가는 영상획득 시 얻은 총 계수 값보다는 단위 시간당의 계수율이 영향을 준다는 것을 의미한다고 할 수 있다. 실험 모두에서 계수설정법으로 얻은 경우에는 단위 질량당 방사능량의 증가에도 불구하고 거의 비슷한 SNR값을 보이게 된다. 따라서 좋은 질의 영상을 얻기 위해서는 총 계수값의 증가보다는 단위질량당 방사능량을 높여야 하며, SNR만을 이용한 영상의 질에 대한 평가는 적절하지 않을 수 있다는 점을 고려하여야 한다.

  • PDF

여름 파프리카 수경재배에서 근권 냉방 시간이 근권 온도와 생리적 반응에 미치는 영향 (Effect of Cooling Timing in the Root Zone on Substrate Temperature and Physiological Response of Sweet Pepper in Summer Cultivation)

  • 최기영;고지연;유형주;최은영;이한철;이용범
    • 원예과학기술지
    • /
    • 제32권1호
    • /
    • pp.53-59
    • /
    • 2014
  • 본 실험은 고온기 근권 냉방 시간에 따른 배지 온도 하강과 파프리카(Capsicum annum L.) 'Orange glory'의 생리적 반응을 알아보고자 7월 16일부터 10월 15일까지 코이어 배지에서 수경 재배하였다. 배지의 일평균, 최고 및 최저 온도변화와 파프리카의 뿌리 활력, 수분 포텐셜, 개화시기 및 착과수 등을 측정하였다. $20{\pm}2^{\circ}C$의 냉수를 순환시키는 XL 파이프 근권부 냉방시간 처리는 전일(전일, 24시간), 야간(야간, 오후 5시-오전 3시), 및 냉방 무처리(대조구)로 7월 23일부터 9월 23일까지 처리하였다. 고온기(7월 23일-8월 31일) 동안 일평균 배지 온도가 전일 처리구에서는 $25.6^{\circ}C(22.7-28.2^{\circ}C)$, 야간 처리구에서는 $26.1^{\circ}C(22.9-29.2^{\circ}C)$로 대조구의 $29.1^{\circ}C(24.7-33.2^{\circ}C)$에 비해 $1.8-5^{\circ}C$ 낮아졌다. 하루 중(맑은 날, 8월 1일) 배지의 최고온도 도달 시간이 전일과 야간 처리구에서는 오후 4-5시였으며, 대조구는 오후 7-8시였다. 주간(오전 6시-오후 8시)과 야간(오후 8시-오전 6시) 시간의 배지 온도는 처리에 따라 차이를 보였다. 주간/야간의 배지 평균온도는 대조구보다 전일 처리구에서 $3.3^{\circ}C/4^{\circ}C$, 야간 처리구에서 $2.1^{\circ}C/3.4^{\circ}C$ 낮아졌다. 배지 깊이별 배지 온도 차(대조구 배지 온도 - 처리구 배지 온도)는 하부에서 가장 컸다. 전일 처리구의 배지 온도차 변화는 배지 상/중/하부에서 완만하였으나, 야간 처리구는 주간과 야간 시간대 배지 온도 차가 배지 중간, 하부에서 커졌다. 배지 평균 온도가 $25^{\circ}C$ 이상 계측된 날이 대조구에서는 40일, 전일 처리구에서는 23일, 야간 처리구에서는 27일로 대조구에 비해 각각 42.5%, 32.5% 배지온도 하강효과를 보였다. 전일 처리구의 파프리카 뿌리 활력과 수분 포텐셜은 야간 처리구보다 유의하게 높았다. 근권 냉방 처리의 첫 개화시기는 4-5일 앞당겨지고 착과수도 유의하게 증가하였다. 그러나 고온기 지상부가 고온(${\geq}30^{\circ}C$)으로 파프리카 착과는 늦어졌다. 이는 근권 냉방으로 배지 온도가 $1.8-5.0^{\circ}C$ 낮아졌으나, 고온기 파프리카 생육과 착과를 위해서는 근권 냉방뿐 아니라 지상부 온도를 낮추는 방식이 병행되어야 한다.

참여자관점에서 공급사슬관리 시스템의 성공에 영향을 미치는 요인에 관한 실증연구 (An Empirical Study on the Determinants of Supply Chain Management Systems Success from Vendor's Perspective)

  • 강성배;문태수;정윤
    • Asia pacific journal of information systems
    • /
    • 제20권3호
    • /
    • pp.139-166
    • /
    • 2010
  • The supply chain management (SCM) systems have emerged as strong managerial tools for manufacturing firms in enhancing competitive strength. Despite of large investments in the SCM systems, many companies are not fully realizing the promised benefits from the systems. A review of literature on adoption, implementation and success factor of IOS (inter-organization systems), EDI (electronic data interchange) systems, shows that this issue has been examined from multiple theoretic perspectives. And many researchers have attempted to identify the factors which influence the success of system implementation. However, the existing studies have two drawbacks in revealing the determinants of systems implementation success. First, previous researches raise questions as to the appropriateness of research subjects selected. Most SCM systems are operating in the form of private industrial networks, where the participants of the systems consist of two distinct groups: focus companies and vendors. The focus companies are the primary actors in developing and operating the systems, while vendors are passive participants which are connected to the system in order to supply raw materials and parts to the focus companies. Under the circumstance, there are three ways in selecting the research subjects; focus companies only, vendors only, or two parties grouped together. It is hard to find researches that use the focus companies exclusively as the subjects probably due to the insufficient sample size for statistic analysis. Most researches have been conducted using the data collected from both groups. We argue that the SCM success factors cannot be correctly indentified in this case. The focus companies and the vendors are in different positions in many areas regarding the system implementation: firm size, managerial resources, bargaining power, organizational maturity, and etc. There are no obvious reasons to believe that the success factors of the two groups are identical. Grouping the two groups also raises questions on measuring the system success. The benefits from utilizing the systems may not be commonly distributed to the two groups. One group's benefits might be realized at the expenses of the other group considering the situation where vendors participating in SCM systems are under continuous pressures from the focus companies with respect to prices, quality, and delivery time. Therefore, by combining the system outcomes of both groups we cannot measure the system benefits obtained by each group correctly. Second, the measures of system success adopted in the previous researches have shortcoming in measuring the SCM success. User satisfaction, system utilization, and user attitudes toward the systems are most commonly used success measures in the existing studies. These measures have been developed as proxy variables in the studies of decision support systems (DSS) where the contribution of the systems to the organization performance is very difficult to measure. Unlike the DSS, the SCM systems have more specific goals, such as cost saving, inventory reduction, quality improvement, rapid time, and higher customer service. We maintain that more specific measures can be developed instead of proxy variables in order to measure the system benefits correctly. The purpose of this study is to find the determinants of SCM systems success in the perspective of vendor companies. In developing the research model, we have focused on selecting the success factors appropriate for the vendors through reviewing past researches and on developing more accurate success measures. The variables can be classified into following: technological, organizational, and environmental factors on the basis of TOE (Technology-Organization-Environment) framework. The model consists of three independent variables (competition intensity, top management support, and information system maturity), one mediating variable (collaboration), one moderating variable (government support), and a dependent variable (system success). The systems success measures have been developed to reflect the operational benefits of the SCM systems; improvement in planning and analysis capabilities, faster throughput, cost reduction, task integration, and improved product and customer service. The model has been validated using the survey data collected from 122 vendors participating in the SCM systems in Korea. To test for mediation, one should estimate the hierarchical regression analysis on the collaboration. And moderating effect analysis should estimate the moderated multiple regression, examines the effect of the government support. The result shows that information system maturity and top management support are the most important determinants of SCM system success. Supply chain technologies that standardize data formats and enhance information sharing may be adopted by supply chain leader organization because of the influence of focal company in the private industrial networks in order to streamline transactions and improve inter-organization communication. Specially, the need to develop and sustain an information system maturity will provide the focus and purpose to successfully overcome information system obstacles and resistance to innovation diffusion within the supply chain network organization. The support of top management will help focus efforts toward the realization of inter-organizational benefits and lend credibility to functional managers responsible for its implementation. The active involvement, vision, and direction of high level executives provide the impetus needed to sustain the implementation of SCM. The quality of collaboration relationships also is positively related to outcome variable. Collaboration variable is found to have a mediation effect between on influencing factors and implementation success. Higher levels of inter-organizational collaboration behaviors such as shared planning and flexibility in coordinating activities were found to be strongly linked to the vendors trust in the supply chain network. Government support moderates the effect of the IS maturity, competitive intensity, top management support on collaboration and implementation success of SCM. In general, the vendor companies face substantially greater risks in SCM implementation than the larger companies do because of severe constraints on financial and human resources and limited education on SCM systems. Besides resources, Vendors generally lack computer experience and do not have sufficient internal SCM expertise. For these reasons, government supports may establish requirements for firms doing business with the government or provide incentives to adopt, implementation SCM or practices. Government support provides significant improvements in implementation success of SCM when IS maturity, competitive intensity, top management support and collaboration are low. The environmental characteristic of competition intensity has no direct effect on vendor perspective of SCM system success. But, vendors facing above average competition intensity will have a greater need for changing technology. This suggests that companies trying to implement SCM systems should set up compatible supply chain networks and a high-quality collaboration relationship for implementation and performance.