• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.63-72
• /
• 2011

Broadcast-based data dissemination has become a widely accepted approach of communication in the mobile computing environment. However, with a large set of data items, the expected delay of receiving a desired data increases due to the sequential nature of the broadcast channel. With the objective of minimizing this wait time, this paper explores the problem of data broadcast over multiple channels. In traditional approaches, data items are partitioned based on their access probabilities and allocated on multiple channels, assuming flat data scheduling per channel. If the data items allocated on the same channel are broadcast in different frequencies based on their access probabilities, the performance will be enhanced further. In this respect, this paper proposes a new broadcast scheduling scheme named two level dynamic programming(TLDP) which can reflect a variation of access probabilities among data items allocated on the same channel.

• Mass Spectrometry Letters
• /
• v.7 no.1
• /
• pp.21-25
• /
• 2016

Dual-channel nano-electrospray has recently become an ionization technique of great promise especially in biological mass spectrometry. This unique approach takes advantage of the mixing processes that occurs during electrospray. Understanding in more detail the fundamental principles influencing spray formation further study of the origins of the mixing processes: (1) in a Taylor cone region, (2) in charged droplets or (3) in both environments. The dual-channel emitters were made from borosilicate theta-shape glass tubes (O.D. 1.2 mm) and had a tip diameters of less than 4 μm. Electrical contact was achived by deposition of a thin film of an appropriate metal onto the surface of the emitter. The experimental investigation of the Taylor cone formation in a dual-channel electrospray emitter has been carried out by injection of polystyrene beads (diameter 3 μm) at very low concentrations into one of the channels of the non-tapered theta-glass tubes. High-speed camera experiments were set up to visualize the mixing processes in Taylor cone regions for dual-channel emitters. Mass spectra from dual nano-electrospray are presented.

• Journal of Distribution Research
• /
• v.8 no.2
• /
• pp.1-18
• /
• 2003

This study has tried an integrated approach toward consumer response difference between the online internet shopping mall and the off-line department store focusing on the moderating role of shopping value according to shopping situation. This study has analyzed consumer behavior differences between online and off-line channel formats in one framework and identified differences in consumer behaviors between the two channel formats. Managerial implications of this paper include measuring the effects of the integration of online and off-line channel and developing multichannel strategy. This paper suggests marketers to develop channel strategies based on customer segmentation criteria reflecting different consumer shopping value between online and off-line channel formats rather than developing strategies based only on the conventional marketing mix.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.89-93
• /
• 2001

In recent years Fiber optic hydrophone systems have been the focus of much attention in the sonar world. For sonar arrays, a fiber optic approach offers the major benefit of passive multiplexing of large numbers of hydrophones without underwater electronics. This paper describes recent development work covering array construction, opto-electronics development, hydrohpone design and sea trials. And the development of an interferometric mult-channel fiber optic hydrophone system which uses time division multiplexing capable of driving in excess of 32 channel is described. For this, a 12 channel time division multiplexing array has been constructed, and the performance of this system is demonstrated by sea trial.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.1
• /
• pp.318-330
• /
• 2015

In wearable sensor systems (WSSs), sensor nodes are deployed around human body parts such as the arms, the legs, the stomach, and the back. These sensors have limited lifetimes because they are battery-operated. Thus, transmission power control (TPC) is needed to save the energy of sensor nodes. The TPC should control the transmission power level (TPL) of sensor nodes based on current channel conditions. However, previous TPC algorithms did not precisely estimate the channel conditions. Therefore, we propose a new TPC algorithm that uses an accelerometer to directly measure the current channel condition. Based on the directly measured channel condition, the proposed algorithm adaptively adjusts the transmission interval of control packets for updating TPL. The proposed algorithm is efficient because the power consumption of the accelerometer is much lower than that of control packet transmissions. To evaluate the effectiveness of our approach, we implemented the proposed algorithm in real sensor devices and compared its performance against diverse TPC algorithms. Through the experimental results, we proved that the proposed TPC algorithm outperformed other TPC algorithms in all channel environments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.73-80
• /
• 2016

We had introduced the backgrounds, history and physical meanings of Jong Nang in "Jeju Jong Nang Channel Code I, II and III". In "Jeju Jong Nang Channel Code II" paper, we have introduced practical the root of digital human binary coded Jong Nang communications as the wooden gate in Korea Jeju Island custom and investigated Jong Nang gatemodels as an approximation of the AWGN model. The objective was to find a deterministic model, which was accessible to analysis the capacity. Jong Nang communications mean the normal 3 rafters placed on two vertical stones with three holes to convey the family's whereabouts that is deterministic signal. In this paper we find the capacity of deterministic signal processing about the linear deterministic signals approximately.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.4
• /
• pp.1884-1903
• /
• 2019

Device-to-Device (D2D) communications can provide proximity based services in the future 5G cellular networks. It allows short range communication in a limited area with the advantages of power saving, high data rate and traffic offloading. However, D2D communications may reuse the licensed channels with cellular communications and potentially result in critical interferences to nearby devices. To control the interference and improve network throughput in overlaid D2D cellular networks, a novel channel assignment approach is proposed in this paper. First, we characterize the performance of devices by using Poisson point process model. Then, we convert the throughput maximization problem into an optimal spectrum allocation problem with signal to interference plus noise ratio constraints and solve it, i.e., assigning appropriate fractions of channels to cellular communications and D2D communications. In order to mitigate the interferences between D2D devices, a cluster-based multi-channel assignment algorithm is proposed. The algorithm first cluster D2D communications into clusters to reduce the problem scale. After that, a multi-channel assignment algorithm is proposed to mitigate critical interferences among nearby devices for each D2D cluster individually. The simulation analysis conforms that the proposed algorithm can greatly increase system throughput.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1047-1050
• /
• 2009

The two approaches to improve the stability of oxide TFTs are described. First approach is the optimization of device architecture including MIS structure and passivation layer using conventional InGaZnO semiconductor channel layer. Second approach is to develop the new kinds of oxide semiconductor materials, which is very robust and stable against the gate bias stress and thermal stress.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.375-381
• /
• 2012

If a mobile station requests a channel allocation in its mobile networks, the switching center assigns a channel to a mobile station that belongs to each base station. There are three kinds of channel allocation schemes; a fixed channel allocation, a dynamic channel allocation and a hybrid combination of these two forms. In assigning a good frequency, it is our intention to provide quality service to our customers as well as to use resources efficiently. This paper proposes methods of assigning frequencies that minimize interference between channels and that also minimize the amount of searching time involved. In this paper, we propose an algorithm to per specific equipment, regardless of the number of channels that can be used as a general-purpose system, such as base stations, control stations, central office model is proposed, the existing operators manner similar to the fixed channel allocation based statistics and assigned when the conventional method and the improved method is proposed. Different ways and compared via simulations to verify the effectiveness of the proposed approach.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.3 s.303
• /
• pp.31-40
• /
• 2005

In this paper, we develop an approach toward JSC(Joint Source-Channel Coding) method for MPEG-4 based FGS(Fine Granular Scalability) video coding and transmission in fixed and mobile receiving environment(Digital Audio Broadcasting, DAB). The source coder used MPEG-4 FGS video codec, the channel coder used RCPC(Rate Compatible Punctured Convolution) code and the modulation method used QPSK modulation. We have considered channel environment of AWGN and mobile receiving environment. This study determined optimum Trade-off point between source bit rate and channel coding rate in variable channel states. We compared FGS-JSC method and general single layer CBR(Constant Bit Rate) transmission. In this results, FGS-JSC was appeared better performance than CBR transmission.