• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.1
• /
• pp.1-11
• /
• 2019

This study was conducted to analyze the conservation status by diagnostical methology for the front wall of Jungjeongdang area of Dodong-Seowon. The study was carried out as photogrammetry and mapping - investigation of materials and conservation status - analysis and evaluation of conservation status. The results are as follows. First, in the case of photogrammetry, each photograph was took in superposition, and the distortions of the photographs were corrected and synthesized. Based on this, actual survey drawings of the wall were prepared. Second, in case of material and conservation status, the wall is in the form of Wapyeondam and the material of the head part are tile, mud and lime, and the material of the body part are mud and tile. The mud was mixed with gravel, sand and straw. At the base part, amorphous natural stones and mud were used. The remarkable damage that appears on the wall is erosion of the base part, and some disintegration appears in the body part. There is a biological patina on the head and the base, and vegetation such as lichen is concentrated on the partial body. There was superficial deposit in the head part, and some tiles were broken or lost. Deep fissures are intensively located in some part of the eastern wall. Third, in the case of analysis and evaluation of the conservation status, it is considered that by the erosion of the foundation part and the disintegration of the body part, there is a possibility that physical damage will continue to be applied to the wall, so immediate action is necessary. The distribution of biological patina and vegetation does not appear to cause great problems in the wall, but it is necessary to reduce it in view of aesthetic problems. A cracked or missing tile would need to be replaced, and deep cracks in the eastern wall appear to have been caused by subsidence, and reinforcement of the underground is necessary to prevent further damage.

• Journal of Life Science
• /
• v.29 no.5
• /
• pp.555-563
• /
• 2019

This study was undertaken to investigate the effect of an ethanol extract of Elaeagnus umbellata leaves (EUL-EE) on skin-related biological activities. Previously, we have reported that gallic acid was the major phenolic compound in EUL-EE through quantitative analysis and that EUL-EE had an inhibitory effect against the proliferation of liver cancer HepG2 cells. In the present study, the inhibitory effects of EUL-EE on melanin production and tyrosinase activity in ${\alpha}$-melanocyte-stimulated hormone-stimulated B16-F0 cells were determined to assess the effects of EUL-EE on skin whitening. The anti-wrinkle effect using UVB-irradiated CCD-986sk cells was examined by the expression of type I procollagen and metalloproteinase (MMP)-1 release. The EUL-EE significantly decreased intracellular melanin production (33.0% inhibition at $100{\mu}g/ml$) when compared with untreated B16-F0 cells. Tyrosinase activities in the stimulated B16-F0 cells were also decreased by EUL-EE (47.8% inhibition at $100{\mu}g/ml$). The EUL-EE also dose-dependently increased the production of type I procollagen (up to 1.74-fold at $250{\mu}g/ml$) in CCD-986sk cells when compared with UVB-irradiated controls. EUL-EE showed no cytotoxicity at concentrations up to $500{\mu}g/ml$. In addition, EUL-EE at $10-500{\mu}g/ml$ inhibited the release of MMP-1 to the medium from UVB-irradiated CCD-986sk cells. Taken together, these observations indicate that EUL-EE has high potential for use as inner beauty and cosmetic materials due to its whitening and anti-wrinkle effects.

• Journal of the Korea Convergence Society
• /
• v.10 no.4
• /
• pp.99-106
• /
• 2019

The purpose of this study is to analyze the effects of the simulation-based professional cardiac resuscitation training on the performance of professional cardiac resuscitation performed by paramedics in the pre-hospital stage and to provide basic data for effective cardiac resuscitation. This study is an experimental study of the design before and after the control of non-equality. The subjects of this study were 16 newly recruited paramedics from K firefighting school. The simulation training program and evaluation papers used as the evaluation tool were reviewed and commented by 6 ACLS simulation experts (2 emergency medical doctor, 2 emergency medical professors, 2 KALS instructors)Respectively. The training consisted of 30 minutes of theory and 150 minutes of practical training. The lecturer first demonstrated for 5 minutes, and after training by individual debriefing after individual training, individual and team education was conducted The evaluation scale was given a 5 - point Likert scale. The SPSS 22.0 program for Windows was used. The general characteristics of the subjects were analyzed for frequency, the examination of homogeneity between the experimental group and the control group wasfulfilled by t test, and the difference test between the groups of the two groups was performed using the paired t-test. The homogeneity test was able to confirm the homogeneity between experimental group and control group. In the evaluation of six ACLS techniques, it was proven that the experimental group that received the simulation training had better performance in all aspects than the non - training control group. The following are the technical items to be performed. 1. Electrocardiogram 2. Specialized instrument 3. Treatment of fluid 4. Leadership and teamwork 5. Medical guidance 6. Evaluation during transfer. It was proved that paramedics who received simulation training were improved on their job performance ability than general lecture and training group. Therefore, if simulation training and education are applied to a student in the synthetic course or an emergency resident who is engaged in clinical practice, he / she will be able to perform his / her duties more proficiently. It is expected that emergency services provided to patients with cardiac arrest will be improved.

• Korean Journal of Remote Sensing
• /
• v.35 no.2
• /
• pp.251-263
• /
• 2019

Sentinel-2 Multi Spectral Instrument(MSI) launched by the European Space Agency (ESA) offered high spatial resolution optical products, enhanced temporal revisit of five days, and 13 spectral bands in the visible, near infrared and shortwave infrared wavelengths similar to Landsat mission. Landsat satellite imagery has been applied to various previous studies, but Sentinel-2 optical satellite imagery has not been widely used. Currently, for global coverage, Sentinel-2 products are systematically processed and distributed to Level-1C (L1C) products which contain the Top-of-Atmosphere (TOA) reflectance. Furthermore, ESA plans a systematic global production of Level-2A(L2A) product including the atmospheric corrected Bottom-of-Atmosphere (BOA) reflectance considered the aerosol optical thickness and the water vapor content. Therefore, the Sentinel-2 L2A products are expected to enhance the reliability of image quality for overall coverage in the Sentinel-2 mission with enhanced spatial,spectral, and temporal resolution. The purpose of this work is a quantitative comparison Sentinel-2 L2A products and fully simulated image to evaluate the applicability of the Sentinel-2 dataset in cultivated land growing various kinds of crops in Korea. Reference image of Sentinel-2 L2A data was simulated by airborne hyperspectral data acquired from AISA Fenix sensor. The simulation imagery was compared with the reflectance of L1C TOA and that of L2A BOA data. The result of quantitative comparison shows that, for the atmospherically corrected L2A reflectance, the decrease in RMSE and the increase in correlation coefficient were found at the visible band and vegetation indices to be significant.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.2
• /
• pp.97-100
• /
• 2018

Purpose The glomerular filtration rate (GFR) test is an important indicator of glomerular filtration and has been used to test renal function and the extent of its function. The GFR test is performed by intravenous injection of radioactive medicines made of $^{51}Cr$-EDTA, and blood concentration is measured by taking blood according to the elapsed time. also, PET-CT, bone scan, transfusion and so on will affect the outcome. Therefore, we will improve the quality of the test by providing guidelines for the GFR test for more accurate testing. Materials and Methods 5 mL of physiological saline solution and 2 mL of $^{51}Cr$-EDTA solution are used to make 5 mL of the radiopharmaceutical solution to be injected into the patient. First, the syringe weight is measured before the injection, and then the radioactive medicine is injected into the patient's vein and the syringe weight is measured after the injection. Blood sampling is performed twice in total. In adults, blood is collected 3 hours / 5 hours after injection and in children 2 hours / 5 hours after injection. The blood sample is centrifuged at 3300 rpm for 5 minutes. Standard solution is prepared by filling diluent water up to the scale indicated in the 200-mL volumetric flask, discarding $500{\mu}L$, injecting $500{\mu}L$ of GFR reagent and mixing well. $500{\mu}L$ each of the standard solution is dispensed into two test tubes, and $500{\mu}L$ of each of the plasma samples collected in time is dispensed into two test tubes and measured with a Cobra Counter. Results At present, the reference range applied in this study is $119.5{\pm}30.3ml/min/1.73m2$ for males and $125.2{\pm}28.2ml/min/1.73m^2$ for females. Conclusion The GFR test is conducted using radioactive medical products. GFR testing is performed as a scheduled test, but PET-CT, dialysis and transfusion, which may affect GFR testing, may be scheduled during GFR testing. Therefore, we could get accurate GFR test results by notifying the ward and department beforehand when booking.

• Membrane Journal
• /
• v.28 no.6
• /
• pp.432-443
• /
• 2018

In this study, propylene/propane separation behavior of Na-type faujasite zeolite membranes is predicted by observing gravimetric adsorptions of propylene and propane on zeolite 13X. The gravimetric adsorptions were measured by using a magnetic suspension balance (MSB) at temperatures of 323, 343, 363 K and a pressure range of 0.02-1 bar. The pressure was increased at 0.1 bar intervals. As adsorption temperature increased, adsorptions of propylene and propane decreased and propylene/propane adsorption selectivity increased. Also, the diffusion coefficients of propylene and propane were increased as the adsorption temperature increased, following the Arrhenius equation. The maximum propylene/propane diffusion selectivity was 0.9753 at 323 K. The perm-selectivity was calculated from the adsorption data of zeolite 13X and compared with the perm-selectivity measured in the single gas permeation experiment for the Na-type faujasite zeolite membrane. The maximum values for the calculated and measured perm-selectivities were observed at a temperature of 323 K. It could be concluded that the prediction of propylene/propane separation of surface diffusion-based membrane by using gravimetric adsorption data is reasonable. Therefore, it is expected that this prediction method can be applied to the screening of adsorption-based microporous membrane for propylene/propane separation.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.3
• /
• pp.85-105
• /
• 2021

The purpose of this study is to develop and implement cooperative consumption education programs using design thinking in middle school home economics education classes to understand the impact on students' cooperative problem solving competency. Accordingly, a cooperative consumption education program based on design thinking was developed according to the ADDIE model, and the evaluation was conducted on a total of 25 students. The results of the study were as follows. First, based on prior research, we developed a consumption education program based on D. school's design thinking process under the theme of 'Creating a Shared School' for the practice of cooperative consumption. As a result of expert validity verification of the teaching/learning course plan and workbook for the eight sessions, the average question was 4.72 (out of 5 points) and the average CVI was 0.93, indicating that the content validity and field suitability were excellent. Second, to summarize the results achieved from the implementation of the cooperative consumption education program, the pre-/post-test using the revised and supplemented cooperative problem-solving competency tool, and the open-ended survey, It was confirmed that the developed program had a significant effect on improving not only the students' knowledge and perceived necessity for cooperative consumption along with the awareness of practice, but also the cooperative problem-solving competency. As a follow-up study, we propose to expand the research to a wider audience, and to further conduct research and develop programs applied with design thinking in home economics curriculum and in consumer competency development. This study confirmed that cooperative consumption education programs using design thinking are effective in improving youth's cooperative problem-solving competency and is meaningful in that they developed consumption education programs under the theme of 'cooperative consumption' in response to changing consumer education needs.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.5
• /
• pp.97-111
• /
• 2021

The purpose of this study was to analyze commemoration characteristics of the United States of America, the Commonwealth, and Germany through representative 14 military cemeteries of World war II in Western Europe. Based on the commemoration characteristics such as spacial characteristic, commemorative elements, and graves and headstone, the commemoration culture among U.S., the Commonwealth. and Germany were studied comparatively. The results are as follows. First, taking geometrical form with mainly square type, rarely circle and spiral patterned, most cemeteries were structured spatial central axis with symmetry, those cemeteries were styled neoclassical, but some of the U.S. cemeteries were modernistic, connecting spaces organically with curved line layout. Second, chapel, the wall of missing, the wall of battle map, and sculpture in the U.S military cemeteries, and 'the cross of sacrifice' and 'the stone of remembrance' as classical monument in the Commonwealth war cemeteries were commonly applied standardized commemorative elements, but commemorative monuments in German military cemeteries were restricted except monumental cross. Third, the symbolic cross of christianism was used all cemeteries to console and cherish the soul of soldiers, specially the Latin crosses in the U.S military cemeteries delivered political message as the american martyr for Western Europe and also the power of the U.S., but the cross in German and the Commonwealth war cemeteries were basically cherish and comfort individual spirit. Fourth, showing the power of victory with national patriotism, the U.S. strongly represented christianism and liberal democracy against communism, the Commonwealth showed imperialistic style, and German military cemeteries were quietly appeared as traditional style forwarding reconciliation and peace. This study suggest the war cemeteries have national identity with typical form and symbolic aesthetics. Further study will be required to materialize sublime commemoration in national cemeteries and to form advanced commemorative culture in Korea.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.3
• /
• pp.228-241
• /
• 2021

Cremated archaeological bones provide crucial information to unravel the details of ancient cremation events and funeral culture. The research on cremated bones to date has been mainly focused on extracting archaeological information in Korea. Recently, the techniques of physical anthropology have been applied to obtain biological information and cremation temperatures for individuals. This study analyzed human remains excavated from Seoul Seokchon-dong Ancient Tombs and determined whether there were human cremations as well as the estimated cremation temperatures. There was no trace of fire in the pits where cremated bones were found; therefore, it is assumed that they were deposited with the artifacts. In this study, four samples were selected according to the surface color of the bones, and X-ray diffraction analysis (XRD) and Fourier-transformed infrared spectroscopy (FT-IR) were used for analysis. All four of the Seokchon-dong cremated bones were found, based on the crystallization index of X-ray diffraction analysis, to have experienced cremation above the temperature of 700℃. Infrared spectroscopy results indicated that the four bones from Seokchon-dong were cremated at temperatures above 700℃ and below 1,000℃. IR peaks were observed at 700℃, whereas no changes were found when bones experienced more than 1000℃. We assume that the cremated people in the Seokchon-dong Tombs were people of high-status because cremation at such a high temperature at that period required much effort. Here we present significant evidence of the cremation status and temperature of archaeological human bones on the basis of XRD and FT-IR, allowing for the restoration of the cremation events and funeral culture in archaeological sites.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.2
• /
• pp.153-163
• /
• 2021

Purpose: The aim of this study was to evaluate the effects of four surface treatment methods to improve zirconia roughness and three types of resin cement on the shear bond strength (SBS). Materials and methods: A total of 120 zirconia blocks were randomly divided into four surface treatments: non-treatment (Control), airborne-particle abrasion (APA) with 50 ㎛ Al2O3 (APA50), APA with 125 ㎛ Al2O3 (APA125), and ZrO2 slurry (ZA). Three resin cements (Panavia F 2.0, Superbond C&B, and Variolink N) were applied to the surface-treated zirconia specimens. All specimens were subjected to SBS testing using a universal testing machine. The surface of the representative specimens of each group was observed by scanning electron microscope (SEM). SBS data were analyzed with oneway ANOVA, two-way ANOVA test and post-hoc Tukey HSD Test (α=.05). Results: In the surface treatment method, APA125, APA50, ZA, and Control showed high shear bond strength in order, but there was no significant difference between APA125 and APA50 (P>.05). Also, ZA showed significantly higher shear bond strength than Control (P<.05). In the resin cement type, Panavia F 2.0, Superbond C&B, and Variolink N showed significantly higher shear bond strength in order (P<.05). In SEM images, the zirconia surfaces of the APA50 and APA125 showed quite rough and irregular shapes, and the zirconia surface of the ZA was observed small irregular porosity and rough surfaces. Conclusion: APA and ZrO2 slurry were enhanced the surface roughness of zirconia, and Panavia F 2.0 containing MDP showed the highest shear bond strength with zirconia.