• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.560-563
• /
• 2003

In this paper describes for use Authentication with the WPKI and Kerberos protocol. this paper is the security structure that defined in a WAP forum and security and watches all kinds of password related technology related to the existing authentication system. It looks up weakness point on security with a problem on the design that uses wireless public key-based structure and transmission hierarchical security back of a WAP forum, and a server-client holds for user authentication of an application level all and all, and it provides one counterproposal. Therefore, We offer authentication way solution that connected X.509 with using WIM for complement an authentication protocol Kerberos and its disadvantages.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.214-227
• /
• 2003

Developing an application, it is difficult to catch an exact requirement with the conventional text-based method. It has also problems in verification and analysis at each developing stage. Therefore, if an adjustment is required with an error and change of requirement, a bad effect happen in the whole system. In this case, it also affect adversely on the developing cost and period. Meanwhile, if an analysis or verification is performed, the possibility of an error frequency reduces. Thus, not only is it easier to correct the error but also add an new requirement. This thesis embody a TCP/IP congestion control algorithm with SDL which provides automatically graphic interface, verification and analysis to each developing stage. Using SDL gave a clear representation embodiment in each developing stage and easiness of adjustment due to changing requirements or correcting errors. In addition, the stages of protocol have been certified in a simulation by verification of MSC and the results showed a possibility of developing a better TCP/IP protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.839-844
• /
• 2011

IPTV contents are based on MPEG2-TS(Moving Picture Expert Group-2 Transport Stream). The Created content is delivered to each home's Set-Top box through the Internet service network, which will be visible on television through the decoding process. The using and spending of content expanding were quite limited in the other existing lines' devices. For this end, provided methods are to convert MPEG2-TS to other format and then transmit it. These methods are causing not only an overload to the system but also its increasing the hardware resource requirements. In this paper, the MPEG2-TS of IPTV's content using RTP(Real time Transport Protocol) provided by the applicable variety of devices and environmental system, was designed and implemented. Through this paper, the existing MPEG2-TS is providing other devices for distribution and consumption that can give better content to the consumers which means that the QoS(Quality of Service) was enhanced. And, the increased consumption and use of content will help the IPTV business to get more development and activation.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.1
• /
• pp.95-105
• /
• 1995

An appendix to the MAP 3.0 specification notes that there are primary advantages to use of fiber optics : noise immunity, ability to run in difficult electrical environments, safety and high data rates. All of these may be quite useful in various manufacturing environments. In this paper, we study on construction schmes for a fiber-based 802.4 MAP system including the use of both bus and star topologies. We suggest passive star network and FDDI network for manufacturing environment. And then, we propose the FDDI protocol including the use a dual ring topology running at 100 Mbps to physical and datalink layer of MAT specification and analysis it's protocol and topology for abilities in manufacturing environments, We evaluate about applications service, time-critical processing and topology of two models in manufacturing environment.

• The KIPS Transactions:PartC
• /
• v.11C no.2
• /
• pp.163-170
• /
• 2004

The additional mechanism Is required to set up a secure connection among the communication subjects in the internet environment. Each entity should transfer and receive the encrypted and hashed data to guarantee the data integrity. Also, the mutual authentication procedure should be processed using a secure communication protocol. The SSL/TLS is a protocol which creates the secure communication channel among the communication subjects and sends/receives a data. Although the OpenSSL which implements the TLS is using by many developers and its stability and performance are proved, it has a difficulty in using because of its large size. So, this Paper designs and implements the secure communication which the users can use easily by modification works of OpenSSL library API. We proved the real application results using the DRM client/server case which supports a secure communication using the implemented API.

• The Journal of the Korea Contents Association
• /
• v.7 no.4
• /
• pp.49-55
• /
• 2007

Recently, with the IPTV services, e-learning, real-time broadcasting and e-contents, many application services need the multicasting routing protocol. In this paper, the performance of the algorithm to assign the rendezvous router (RP: rendezvous point) in the center-based multicasting mesh network is analyzed. The estimated distance to select RP in the candidate nodes is calculated, and the node minimizing the distance is selected as the optimal RP. We estimate the distance by using the maximum distance, average distance, and mean of the maximum and average distance between the RP and members. The performance of the algorithm is compared with the optimal algorithm of all enumeration. With the assumptions of mesh network and randomly positioned for sources and members, the simulations for different parameters are studied. From the simulation results, the performance deviation between the algorithm with minimum cost and optimal method is evaluated as 6.2% average.

• Journal of KIISE:Information Networking
• /
• v.36 no.2
• /
• pp.118-129
• /
• 2009

The ISO 18000-7 Active RFID standard, a single channel system operating in the 433Mhz, faces technical difficulties in supporting some recently introduced application demands because of its low transmission rates and radio interference between readers. We propose a new multi-channel active RFID system operating in the 2.4Ghz. The special feature of the proposed system is that a reader makes use of multiple interfaces to improve its performance like a multi-core processor. However if only a small part of interfaces are actually used, the performance improvement would not meet the expectation. To overcome this problem, a new multi-channel multi-interface active RFID protocol, which balances communication loads among all available interfaces, is necessary. 3 protocols, named as "Aggregated", "LP-Combined", "AP-Balanced", are proposed. Through simulation, we compare them for various conditions by changing number of tags, number of interfaces, tag data size. AP-Balanced shows the best performance and its performance increases almost linearly as the number of interface increases, which meets our expectation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1238-1244
• /
• 2001

Earlier efforts on optical access concentrated on the design of PONs for the collection and distribution portion of the access network. In these networks the optical hardware in the RN is very simple, but a multiple access protocol is needed for upstream traffic control. On the other hand, the role of communications is already well established in the office environment. With the advent of cheap, affordable broadband communications and the increasing complexity of consumer electronics, it seems natural to extend the network into the home. As the application of Home Area Network is ever increasing, we therefore consider connectivity between access network and home network which generates various traffic to design MAC protocol over residential network. Global-FIFO is quite simple and allows dynamic upstream bandwidth assignment on the basis of a request-and-permit mechanism. It has good bandwidth efficiency and being cell-based, it does not consider the various traffic from home network. In this paper, we design and analyze the new MAC resource assignment algorithm called MQ-FIFO (Multiple Queue-FIFO) that provides good performance under the environment of ATM-PON and Home Network.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.881-889
• /
• 2004

Using the ETC Service, it is now possible to charge a vehicle for driving pass a specific toll booth electronically, without the vehicle even having to slow down. The smart card and card reader used to collect tolls electronically have a serious problem which it dose not have a standard for the ETC system. In this paper, we suggest the ETC system using mobile phone to collect tolls efficiently instead of existing system which is consist of a Interface Module to connect between a mobile phone and OEE, a mobile phone to send the information of tollgate fees and OEE to communication with RSE of roadway in the vehicle. This primary focus of this system is the IM functions and protocol to assist of the existing mobile phone and OBE.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.699-702
• /
• 2007

As ubiquitous environment rapidly emerges due to the development of network and information communication technology, ubiquitous computing is being noticed as a technology that will take the lead in information technology industry of the future. To the end, the data recognized from each sensors, collected, and processed need be transferred to applied service so that they may be used as data for providing service to users. But to send sensors data has weak points that are absence of applicate data accessibility and inter-operablities against difference platform and protocol, deficiency of meta-data and interface against sensors. In this paper, we designed and implemented sensors data processing system that send sensors data to application service via web service with definition against description language describe sensors service and data.