• Journal of Gifted/Talented Education
• /
• v.18 no.1
• /
• pp.139-165
• /
• 2008

This paper is focused on the development of sea wave experimental module for the science gifted students and the potential of its application in high school earth science. Sea wave experimental module for the gifted was characteristics by five phases: Engagement, Exploration, Explanation, Elaboration, and Expansion. Subjects were 16 gifted students, who were 10th graders and have been taught in the adjacent Education Institute for the gifted of Education Districts, Daejeon Metropolitan Office of Education The changes of inquiry ability and knowledge achievement were analyzed according to analysis of experimental report and pre-test and post-test. Experimental module for the gifted was very effective on inquiry skills as follows: control of variables, experimental designing, and selecting tools of experimental process. And also it was positively effective on achievement. The result of this study suggested that experimental module for the science gifted should be very meaningfully to improve scientific ability of them, and the development and application of experimental module for the science gifted be needed for them.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.2
• /
• pp.91-99
• /
• 2014

This paper is about design and implementation of 'SeaMap' importer module which is for map-based application using 'SeaMap' data. 'SeaMap' data importer is a module that reads 'SeaMap' data in consistent form and offers using easily change the format and the internal data structure in the application. Design of data importer module is based on analyzing characteristic of 'SeaMap'. The comparative analysis between the data type of 'SeaMap' and standard S-57 Electronic Navigation Chart (ENC) of the International Hydrographic Organization (IHO), based on this, to be applicable of S-52 standards 'SeaMap' data is defined as a structure of data. The importer module is designed and converted to allow to use distribution type of 'SeaMap' data sets in map application, parsing 'SeaMap' data around the object defining transformation data structure. In addition, we implemented a 'SeaMap' data viewer in order to test our 'SeaMap' data importer module.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.3
• /
• pp.182-187
• /
• 2018

In this study, 20.8% of a p-type Si bifacial solar cell was used to develop a photovoltaic (PV) module to obtain the maximum power under a limited installation area. The transparent back sheet material was replaced during fabrication with a white one, which is opaque in commercial products. This is very beneficial for the generation of more electricity, owing to the additional power generation via absorption of light from the rear side. A new model is suggested herein to predict the power of the bifacial PV module by considering the backside reflections from the roof and/or environment. This model considers not only the frontside reflection, but also the nonuniformity of the backside light sources. Theoretical predictions were compared to experimental data to prove the validity of this model, the error range for which ranged from 0.32% to 8.49%. Especially, under $700W/m^2$, the error rate was as low as 2.25%. This work could provide theoretical and experimental bases for application to a distributed and microgrid network.

• ETRI Journal
• /
• v.38 no.4
• /
• pp.645-653
• /
• 2016

This paper demonstrates the performance of a metal-substrate power module with multiple fabricated chips for a high current electrical application, and evaluates the proposed module using a 1.5-kW sinusoidal brushless direct current (BLDC) motor. Specifically, the power module has a hybrid structure employing a single-layer heat-sink extensible metal board (Al board). A fabricated motor driver IC and trench gate DMOSFET (TDMOSFET) are implemented on the Al board, and the proper heat-sink size was designed under the operating conditions. The fabricated motor driver IC mainly operates as a speed controller under various load conditions, and as a multi-phase gate driver using an N-ch silicon MOSFET high-side drive scheme. A fabricated power TDMOSFET is also included in the fabricated power module for three-phase inverter operation. Using this proposed module, a BLDC motor is operated and evaluated under various pulse load tests, and our module is compared with a commercial MOSFET module in terms of the system efficiency and input current.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.300-302
• /
• 2006

Middleware offers function that user application program can transmit data independently of network device. Connection management about network connection of module is important for normal service of module base personal robot. Unpredictable network disconnection is influenced to whole robot performance in module base personal robot. For this, Middleware must be offer two important function. The first is function of error detection and reporting about abnormal network disconnection. Therefore, middleware need method for network error detection and module management to consider special quality that each network device has. The second is the function recovering that makes the regular service possible. When the module closed from connection reconnects, as this service reports connection state of the corresponding module, the personal robot resumes the existing service. In this paper proposed method of network connection management for to support fault tolerant about network error of network module based personal robot.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.5
• /
• pp.415-425
• /
• 2000

An open architecture manufacturing strategy intends to integrate manufacturing components on a single platform so that a particular component can be easily added and/or replaced. Therefore, the control scheme based upon the open architecture concept is hardware-independent. In this paper, a modular and object oriented approach for a PC-based open robot control system is investigated. A standard reference model for robot systems, which consists of three modules; hardware module, operating system module, and application software module, is first proposed. Then, a PC-based Open Robot Controller(PC-ORC), which can reconfigure robot control systems in various production environments, is developed. The PC-ORC is built upon the object-oriented method, and allows an easy implementation and modification of various modules. The PC-ORC consists of basic softwares, application objects, and additional hardware device on the PC Platform. The application objects are: sequencer, computation unit, servo control, ancillary equipment, external sensor control, and so on. In order to demonstrate the applicability of the PC-ORC, the proposed PC-ORC configuration is applied to an industrial SCARA robot system.

• Journal of the Korean Dietetic Association
• /
• v.22 no.3
• /
• pp.225-231
• /
• 2016

The study suggests the possibility of using internet of things for a dietary intake survey. The development scenario of the dietary intake survey was composed of a weighing sensor for measuring food weight, bluetooth module for communicating through smart-phones, and smart-phone application. The weighing sensor attached to the bottom of utensils was designed to measure the weight of initial food & food eaten, and the results were transmitted to the smart-phone through the bluetooth module. The exclusive application in the smart-phone displayed the results of the amount of food intake, calorie intake, and eating rate. Through this system, subjects could continuously monitor their dietary intake & eating rate and recognize their actual eating environment, which leads to prevent overconsumption of food intake & form balanced eating habits. Based on this system, we need to consolidate and develop a weight control program.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.3
• /
• pp.174-179
• /
• 2007

In this paper, we present a optimal module selection using genetic algorithm under the power, area, delay constraint. The proposed algorithm use the way of optimal module selection it will be able to minimize power consumption. In the comparison and experimental results, The proposed application algorithm reduce maximum power saving up to 26.9% comparing to previous non application algorithm, and reduce minimum power saving up to 9.0%. It also show the average power saving up to 15.525% and proved the power saving efficiency.

• East Asian mathematical journal
• /
• v.19 no.1
• /
• pp.113-120
• /
• 2003

We study how the second homotopy modules of group presentations are transformed by Tietze transformations and discuss some application.

• Journal of Korea Water Resources Association
• /
• v.45 no.1
• /
• pp.53-64
• /
• 2012

In this study (II), the module developed in the previous study (I) has been tested on application and numerical stability. The runoff module was compared the result of analysis with two different models (FFC2Q and $Vflo^{TM}$) considering characteristic of infiltration. To examine the application and stability of developed module, runoff aspect was simulated under the variety case of rainfall intensity, effective soil depth, elapsed time. The development module was presented typical type of infiltration process looking physically, the different of saturation point on soil type, and characteristic of soil type. Also, the module was reflected in the runoff feature about rainfall intensity and time distribution. Finally, this paper drew a conclusion that result of rainfall-runoff analysis as compared with difference models (FFC2Q and $Vflo^{TM}$) has a high accuracy.