• Journal of Pharmacopuncture
• /
• v.25 no.1
• /
• pp.24-36
• /
• 2022

Objectives: This study is a comparative analysis of the satisfaction and recognition characteristics for traditional Korean medicine (TKM) in people with disabilities and the general population of Korea. Methods: Here, 5,000 subjects were categorized into two groups based on a disability rating using the data from the 2017 National Survey for the Usage of Korean Medicine. The relationships among the sociodemographic characteristics, TKM usage status, recognition of TKM usage, and recognition of the effectiveness of the TKM treatment were analyzed based on the disease. The response reliability was verified using the chi-square test analysis method. Results: Disabilities corresponded with low rates of high school or higher education (44%, 83.5%) and no jobs (56.9%, 33.5%), mostly the status of the low-income class with a monthly household income of < 1,500 USD (50.9%, 10.5%), poor health conditions (55.2%, 9.8%), high chronic disease prevalence rate (69.0%, 19.9%), high medical care rate (11.2%, 0.5%), and low commercial health insurance subscription rate (44%, 74.2%). Furthermore, people with disabilities visited TKM institutions more often (88.8%, 74.1%) with a high frequency TKM usage rate of ≥ 1-2 times a month (26.2%, 15.3%). They also reported that the cost of using the TKM was very high (14.7%, 8.8%) and that primarily the application of insurance benefits should be improved (52.6%, 47.5%). The treatment effectiveness for diseases was high for musculoskeletal disorders for both people with disabilities and the general population. Conclusion: Preferential application of insurance benefits for musculoskeletal diseases must be extended to the TKM treatment as well, as people with disabilities have a high recognition for these conditions with TKM. It is difficult to perform randomized controlled trials on people with disability. Therefore, large-scale observational and cohort studies should be conducted. We hope this study will help establish a suitable TKM policy for people with disabilities.

• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.119-132
• /
• 2016

This study examined the concept and usage moderated mediating model in structural equation modeling. The theoretical model and hypothesis were developed based on the Location-Based application's Expectancy disconfirmation, Location-Based application's satisfaction, Location-Based application's continuous usage intention, service trust. The statistical results of the two model were compared: one was free model(positive/negative) and the other was the Moderated Mediating Model(positive/negative). A structure equation model analysis was carried out to test the research model. Further studies are necessary to Ssupport the research hypotheses.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.3
• /
• pp.95-103
• /
• 2009

Recently the information system introduction and the application which use the computer are increasing. The efficient operation of information system helps corporations to improve productivity, customer service and corporate competitive power. SaaS(Software as a Service), which is the developed type of outsourcing in the area of information technology, is to use standardized and packaged application by hosting from the outside of enterprise. SaaS is not developed yet as much as people's interest about that in the initial stage, but its related technology and service capacity are accumulated after repeated trial and error, and it's ready to activate the industry. In the area of information system, studies on the measurement of service quality were followed. But there is little study on service quality measurement in the field of SaaS(Software as a Service). The purpose of this study was to divides the SaaS with e-SERVQUAL and it consider the relationship with the perceived recognition and the usage intention. According to this, variables of traditional research were rejected because SaaS is not developed yet in Korea. But information had a strong effect on perceived recognition. Therefore, business related with in SaaS must have provided a correct information about various applications.

• International Journal of Contents
• /
• v.18 no.2
• /
• pp.32-46
• /
• 2022

In recent years, large-scale and high-density use of LED on facades has exposed some disadvantages, such as light pollution, high energy consumption, unsustainability, and poor interactivity. Because of the development of smartphones and augmented reality (AR), AR has emerged as a new technology available to users to interact with the media façade. As an augmented reality app for public space, the AR map app can superimpose virtual images on the surface of a building to form an AR media façade, which can be applied in the fields of navigation, advertising, interactive public art, smart retail, etc. This study establishes the variables influencing usage intention and the consequent outcomes of Huawei AR map app and uses the technology acceptance model (TAM) to discuss their relationship. Results show that consumer innovativeness, information quality, and design quality have a strong influence on perceived ease of use. Information quality has a positive impact on perceived usefulness, but design quality has a weak influence. Also, the design quality of Huawei AR map app and consumer innovativeness have a higher effect on perceived enjoyment than information quality. Users' usage attitude and perceived usefulness when using Huawei AR map app are key factors determining their usage intention. This study inspires city planners, architects, developers, and designers of AR apps that augmented reality can partly replace media façade, and that investment in augmented reality will achieve significant sustainable economic and social benefits.

• The Journal of Society for e-Business Studies
• /
• v.21 no.4
• /
• pp.151-159
• /
• 2016

The user interface is an important factor in providing efficient services to application users. In particular, mobile applications that can be executed anytime and anywhere have a higher priority of usability than applications in other domains.Previous studies have used prototype and storyboard methods to improve the usability of applications. However, this approach has limitations in continuously identifying and improving the usability problems of a particular application. Therefore, in this paper, we propose a usability analysis method using touch gesture data. It could identify and improve the UI / UX problem of the application continuously by grasping the intention of the user after the application is distributed.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.1
• /
• pp.72-80
• /
• 2014

This study proposed a wind power generation system utilizing outdoor air on the rooftop and indoor ventilation, which would increase according to the building height, as a way to help to save energy consumption in a building by using wind power energy of the new renewable energy sources. The study measured the distribution of air currents and power generation according to the usage factor of exhaust pipes in the kitchen and bathroom and identified the elements to consider when applying a wind power generation system to buildings in order to use outdoor air on the rooftop increasing according to the height and the indoor ventilation produced in the facility vertical shafts inside the buildings by installing a wind power generation system on the rooftop. (1) The study measured the ventilation velocity of the kitchen hood and bathroom ventilation fan by changing the zone areas by the households according to the usage factor of [${\alpha}$]=33~100%. As a result, the kitchen ventilation pipe generated the ventilation wind of 3.0m/s or more at the usage factor of [${\alpha}$] 66% or higher, and the bathroom ventilation pipe generated ventilation velocity lower than 3.0m/s, the blade velocity of the wind power generator, even after the usage factor rose to [${\alpha}$]=100%. (2) As the old bathroom ventilation pipe generated the ventilation velocity of 3.0m/s, the blade velocity of the wind power generator, even with the rising usage factor [${\alpha}$], the application of an outdoor air induction module increased the ventilation velocity by 2.9m/s at the usage factor of [${\alpha}$]=33%, 3.8m/s at the usage factor of [${\alpha}$]=66%, and 3.6m/s at the usage factor of [${\alpha}$]=100%. Thus the ventilation velocity of 3.0m/s, the blade velocity of the wind power generator, or higher was secured. (3) The findings prove that the applicability of a wind power generation system using outdoor air on the rooftop and indoor ventilation is excellent, which raises a need for various efforts to increase the possibility of its commercialization such as securing its structural stability according to momentary gusts on the rooftop and typhoons in summer and making the structure light to react to the wind directions of outdoor air on the rooftop according to the seasons.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.2
• /
• pp.37-46
• /
• 2016

Due to increased demand for remodeling and repair in construction market in recent year, the usage of horse scaffold is increasing in the indoor finish works. Injuries related horse scaffold are mainly caused by poor installation or of careless handling of scaffold. Approximately 300 workers are injuried at construction site every year, it is accounting for about 1.5% of the total construction sector and has increased on a year-to-year trends. But the main contents between national standards and speccifications related to the manufacture and usage of horse scaffolds are mutually inconsistent, In particular, the rules on occupational safety and health standards are the basis for the prevention of industrial injuries, there is no explicit application being made to the horse scaffold commonly used on construction sites. The purpose of this study was to analye the manufacture and usage situations in order to reduce construction injuries that occur at the horse scaffolds. It will be utilized the results of the analysis as the basis data for unifying the major domestic standards and specifications associated with the manufacture and usage of horse scaffold.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.3
• /
• pp.127-141
• /
• 2009

While the ever-increasing complexity of automotive software systems can be effectively managed through the adoption of a reliable real-time operating system (RTOS), it may incur additional resource usage to a resultant system. Due to the mass production nature of the automotive industry, reducing physical resources used by automotive software is of the utmost importance for cost reduction. OSEK OS is an automotive real-time kernel standard specifically defined to address this issue. Thus, it is very important to develop and exploit kernel mechanisms such that they can achieve minimal resource usage in the OSEK OS implementation. In this paper, we analyze the task subsystem, resource subsystem, application mode and conformance classes of OSEK OS as well as the OSEK Implementation Language (OIL). Based on our analysis, we in turn devise and implement kernel mechanisms to minimize the dynamic memory usage of the OSEK OS implementation. Finally, we show that our mechanisms effectively reduce the memory usage of OSEK OS and applications.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.5
• /
• pp.385-389
• /
• 2003

There are four main components of the CMP process: polishing pad, slurry, elastic supporter, and pad conditioner. The polishing pad is an essential component to the reproducibility of polishing uniformity in CMP process. However, the polishing pad in recently using metal CMP raised the several points of high cost caused by the increase of cycle time and the many usage of slurry. It is necessary to develop the novel polishing pad which would lead the cost reduction by the higher pad life-cycle, minimized cycle time and lower slurry usage. The characteristics of polishing pad were studied on the effects of different sets of the Polishing pad, which can be applied to metal chemical mechanical polishing process for global planarization of multilevel interconnection structure. The main purpose of this experiment is cost reduction by the increase of pad life-time, the decrease of cycle time and the lower usage of slurry through the specific hard porous structured pad design. It is confirmed that the novel polishing pad made the slurry usage decrease to 60% as well as the pad life-time increase twice with the 25% improvement of removal rate. The polishing time could be decreased and it also helped the cycle time to diminish. It can be expected that this results will help both the process throughput and the device yield to be improved.

• Asia pacific journal of information systems
• /
• v.33 no.2
• /
• pp.298-317
• /
• 2023

This study is about the attitudes and intentions of consumers considering the usage of O2O application (app) under the COVID-19 situation. By integrating TAM and TPB as a theoretical background, we selected VPC (various product choice) and PII (product information intensity) as new functional external variables that have a positive effect on new system called O2O commerce. We also applied the transaction cost theory to investigate the obstacle of O2O business. We conducted a survey of consumers in large cities in the Korean market. As a result of this study, it was found that the more O2O app users recognized the influence of SN (subject norms), the more useful O2O app was, the more it led to a change in attitude and usage intention was positively significant. In addition, as the O2O app was easy to use and useful, and the SN was recognized, the user's attitude was positive. On the other hand, it was also found that the transaction cost that consumers have to pay had a negative effect on usage intention. Additionally, VPC and PII have been shown to positively influence on usefulness of O2O apps.