• 대한토목학회논문집
• /
• 제28권5C호
• /
• pp.313-320
• /
• 2008

본 연구에서는 Plastic Board Drain(PBD)이 타설된 지반의 압밀거동 특성을 파악하고, 배수재 통수능력을 알아보기 위하여 현장의 타설조건을 실험실에서 모사할 수 있는 관입식 복합 통수능 시험기를 개발하였다. 개발된 시험기는 배수재를 타설하고 교란된 시료를 투기하는 기존 방법과 달리, 예비압밀로 시료를 조성한 후 mandrel과 관입장치를 이용하여 PBD를 지반에 타설하도록 고안하였다. 개발된 관입식 복합 통수능 시험기의 적용성을 평가하기 위하여 기존 복합 통수능 시험을 함께 실시하여 결과를 분석하였다. 실험 결과, 기존 방법은 시료 전체의 교란에 의해 압밀이 지연되는 현상으로 나타났으며, 시료의 불균질성 등에 의해 배수재 변형도 국부적으로 발생하였다. 이로 인하여 기존 시험법에 의한 통수능력은 예상치 보다 다소 크게 산정되는 경향을 보였으며, 관입식 방법에 의해 현장조건과 유사하게 통수능력을 분석할 수 있을 것으로 판단되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.720-728
• /
• 2009

This thesis is results of numerical analyses about test results of discharge capacity apparatus using penetration method. Applicability of numerical approach with FEM technique, using Cam-clay model, was confirmed by analyzing the results of standard consolidation test before analyzing test results of discharge capacity apparatus using penetration method. Thus, input parameters for the model was convinced to be appropriate. For numerical analyses about test results of discharge capacity apparatus using penetration method, identical initial and loading conditions during tests were applied to simulate test results correctly. Effects of ground disturbance resulted from installment of vertical drains on the behaviors of consolidation were also simulated. Applicability of numerical approach was investigated by comparing test results with numerical ones. As results of them, both of consolidation settlement were found to be in good agreements so that its applicability was confirmed. As results of numerical estimation, degree of consolidation with the condition of considering smear zone was found to be delayed, compared with results without smear zone. On the other hands, parametric numerical analyses of changing parameters related to smear zone such as permeability and size of smear zone and permeability of vertical drain were also carried out.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.293-299
• /
• 2008

If a conventional type of Plastic Board Drain (PBD) is installed to the deep clay deposit, it is subjected to a high lateral earth pressure. a flow channel of PBD may be reduced by the collapse of cores and clogged by the intrusion of filter into the space between cores which are made by lateral pressure. It could decrease the ability of initial discharge capacity and the reliability of long term discharge capacity. A cylindrical plastic board drain (C-PBD) considered in this study consists of cylindrical core and several supports so that it can prevent the reduction of area of flow channel from the higher lateral earth pressure effectively. The discharge capacity of C-PBD was compared to that of a conventional PBD through performing experiments using the composite discharge capacity apparatus which can consider in-situ condition such as penetration of drains, ground settlement and discharge capacity. As a result, C-PBD showed much better performance than PBD in the ability of discharge. It was observed that the C-PBD was folded whereas the conventional PBD was folded after the experiment.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.2001-2005
• /
• 2008

This paper presents a design of a simulation apparatus to evaluate an operational control algorithm for the PRT system. PRT systems require very short headways to increase the line capacity and a very reliable vehicle control algorithm for avoidance of the impact between vehicles. Therefore, it can be said that the development of an reliable operational control algorithm for the PRT systems is much more important than that of the hardware configurations. In this paper an apparatus is proposed which is composed of virtual vehicles, a central control system, a man-machine interface and monitoring device, making it possible for the designed operational control algorithm to be implemented and tested. For the test of the proposed apparatus a test operational control algorithm is designed and the experimental results show the effectiveness of the proposed simulation apparatus for test and evaluation of the PRT operational control algorithms.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.512-519
• /
• 2000

The discharge capacity of vertical drains installed in the field is reduced with time elapsed after installation due to deformation of drains and clogging effect. Discharge capacity of two types of vertical drains was analysed about three years after installation in the subsoil. Discharge capacity of two types of vertical drains were measured by small, middle, and large scale test apparatus. The results indicate that the discharge capacity of vertical drains after three years operation dramatically decreased compare to the initial discharge capacity.

• 한국진공학회지
• /
• 제20권4호
• /
• pp.243-251
• /
• 2011

국내에서 개발 중인 맥동관형 냉동기 및 일반적인 GM 냉동기 성능평가를 위해 냉각용량 측정 장치를 제작한 후, 측정절차 검토 및 장치 성능확인의 일환으로 상용 냉동기의 냉각용량을 측정했다. 측정된 2차원 냉각용량 차트는 실험에 사용한 냉동기 모델이 가지는 고유 특성을 잘 나타냈다. 이 논문에서는 제작된 냉각용량 평가 장치의 설계사항 및 시운전 결과를 소개한다.

• 한국수소및신에너지학회논문집
• /
• 제27권6호
• /
• pp.628-635
• /
• 2016

Natural gas reformed hydrogen is used as a fuel of fuel cell vehicle, PSA process is used for the purification of reformed hydrogen. In this study, the performance of CO adsorbent in PSA process was evaluated. Zeolite adsorbents used in the commercial PSA process is used. The physical and chemical properties of adsorbents were characterized using BET apparatus, XRD, and FE-SEM. The breakthrough apparatus modified from GC was used for the CO breakthrough experiment, the quantitative analysis of CO adsorption capacity was performed using CO breakthrough curve. Zeolite 10X and 13X showed superior CO adsorption capacity than activated alumina. The CO adsorption capacity of zeolite 10X is more than twice of zeolite 13X even the BET surface area is low. It seems that the presence of $Ca^{2+}$ cation in zeolite 10X is beneficial to the adsorption of CO.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마
• /
• pp.23-28
• /
• 2000

Insulator systems using resin casting apparatus are useful to realize the high capacity, small size, and combined electric power equipments, and are expected to bring various advantages. In Korea, epoxy resin molded apparatus have been restricted to indoor uses till now. On the other hand, in Europe, molded insulators and transformers and so forth have been practically used since the former half of 1960's. Recently, investigation on epoxy resin materials and molded apparatus for outdoor use have ben intensively carried out. Probably, this is because electric power outdoor apparatus such as distribution transformer can be given multi-functions by using outdoor epoxy resin compound This study describes the trend on the development of epoxy mold transformers, and important technologies applied for outdoor use.

• 한국지반공학회지:지반
• /
• 제13권4호
• /
• pp.75-84
• /
• 1997

본 논문은 해안 매립장의 해성점토와 그 기반 풍화토가 갖는 침출수 중의 무기물, 중금속 및 유기물에 대한 오염물 이동성 저감능력을 실내 주상실험에 의하여 조사하였다. 그 결과 무기물 인 칼릅의 경우 해성점토층의 흡착능이 하부 풍화토에 비하여 큰 것으로 나타났으며 중금속인 납과 카드윰의 경우는 매립장 실제 배출 농도보다 큰 농도에서도 완전 흡착되는 것으로 나타났다. 유기성 폐기물에 대한 실험결과 그 흡착능이 무기물이나 중금속에 비하여는 떨어지나 침출수내의 난분해성 유기물질을 기반 점토 및 풍화토가 저감시킬 수 있는 것으로 나타났다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제1권2호
• /
• pp.54-59
• /
• 1999

An experimental study was carried out to improve the cooling capacity and performance of the pulse tube refrigerator. Three buffer pulse tube refrigerator was designed and fabricated, and the experimental apparatus operating process of the therr buffer pulse tube refrigerator and results obtained with the performance test. The cooldown characteristics and load characteristics are described. The lowest temperature measured in the three buffer pulse tube refrigerator was 88K and the cooling capacity at the optimum operating condition was 27 W at 120K.