• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1031-1032
• /
• 2007

Gap servo NF (Near Field) system is one of technologies to reduce beam spot size by increasing NA (Numerical Aperture) of lens. To achieve higher NA, SIL (Solid Immersion Lens) is used. In the case of using a blue LD (405 nm) as the light source the gap distance should be controlled under 100 nm with much tighter margin. Because of very small gap distance between SIL bottom and the surface of media, relative tilt tolerance is limited. In this paper, we presented 2-axis tilt mechanism for skew adjustment within small tilt margin.

• Current Optics and Photonics
• /
• 제4권1호
• /
• pp.16-22
• /
• 2020

In high resolution imaging devices, smaller aperture in the color filter causes cross talk which provides incorrect information. Plasmonic color filters (PCFs) have been reported as an alternative of the conventional color resist based-color filter (CRCF) and many studies on PCFs demonstrated the filtering function by PCFs with a sub-micron size. In this work, we investigated the cross talk performance of PCFs compared to CRCFs. The effect of cross talk over distance from the filter were measured for each filter. Despite poorer spectral filtering characteristics, PCFs were more robust against cross talk than CRCFs. Also, the further away from the filter, the more cross talk appeared. As a result, PCFs showed less cross talk than CRCFs at about 82% of the results measured at a distance of 2~10 ㎛. This study will help to make practical use of PCFs in high-resolution imaging applications.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 춘계종합학술대회
• /
• pp.147-151
• /
• 2000

본 논문은 3차원 유한차분시간영역법(FDTD)을 이용하여 구형도파관 슬랏 안테나를 해석하였다. 해석영역의 반사손실을 최소로 하기위해서 Mur의 2차 흡수경계조건을 사용하였다. 최적 설계를 위해 Time Step, 여진면 크기, 해석영역의 크기, 여진면의 위치 등의 변화에 따른 영향을 살펴보았다 구형도파관 슬랏 안테나 단일 소자에 대한 설계 결과를 기존의 실험결과와 비교하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.874-875
• /
• 2008

Gap servo NFR (Near Field Recording) system is one of technologies to reduce beam spot size by increasing NA (Numerical Aperture) of lens. To achieve high NA, SIL (Solid Immersion Lens) is used. In case of using a blue LD (405 nm) as the light source the gap distance should be controlled under 100 nm with much tighter margin. To develop NFR disc drive with very small gap distance between SIL bottom and the surface of media, we need to research for the vibration characteristics and design considerations. This paper deals with a study on vibration characteristic of NFR disc drive.

• 전자공학회논문지B
• /
• 제32B권7호
• /
• pp.989-1002
• /
• 1995

In this paper, we propose a new algorithm, so called the Signal Decorrelation via Virtual Translation of Array (SDVTA) algorithm, for estimating the directions of arrival(DOA's) of narrowband coherent signals incident on a general array. An effective procedure is composed of transforming the steering matrix of the original array into that of the virtually translated sensor array and taking the average of the transformed covariance matrices in order to decorrelate the coherent signals. The advantage of this approach is in that 1) it can estimate the DOA's of m-1 coherent signals(M : the number of array sensors) since the effective aperture size is never reduced. 2) a geometry of array is unrestricted for solving the narrowband coherency problem. 3) the efficiency of signal decorrelation does not depend on the phase differences between coherent signals unlike the Coherent Signal Subspace Method (CSM). Simulation results are illustrated to demonstrate the superior performance of this new algorithm in comparison with the normal MUSIC and examine the comparative performance with the various choices of the optimal transformation matrix under coherent signal environments.

• 천문학논총
• /
• 제8권1호
• /
• pp.1-15
• /
• 1993

We made a pyramidal horn antenna system for 21cm cosmic radio wave. The antenna system has a rectangular waveguide with $TE_{10}$ mode and a copper probe to detect the electromagnetic wave in waveguide. The parameters of the probe are obtained by experiments using two waveguides. Pyramidal horn antenna is designed to get a gain of 20dB. The size of the aperture of this horn is $94cm{\times}74cm$. The beam width of half power is about $14.7^{\circ}$ for the frequency of 1.4GHz. The horn is made of aluminum plate with a thickness of 2mm. The signal from horn and waveguide is amplified in a receiver system and is converted into DC in the detecter. The intensity of the signal is recorded on a chart recorder. We observed the sun using this simple radio telescope and obtained the brightness temperature of $2.2{\times}10^5K$, which indicates that the sun is quiet at 21cm.

• 대한전자공학회논문지TC
• /
• 제49권2호
• /
• pp.50-55
• /
• 2012

이 논문에서는 스캔 기능을 갖는 패브리 패롯형 공진기 안테나에 대해서 다룬다. 제안하는 배열 안테나는 슈퍼스트레이트/PEC 복합체내에 마이크로스트립 급전 어레이를 이용하는 것으로 급전 위상에 따라서 빔 틸트 각도의 제어가 가능하다. 기존의 배열 안테나와 비교하여 안테나 어퍼쳐 크기의 증가로 높은 디렉티비티와 사이드 로브 억압비의 개선을 가져온다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.487-491
• /
• 2003

Design procedure of corrugated horn antenna for mm-wave frequency range is presented, and hybrid condition in horn is calculated. Balanced hybrid mode should be converted in the horn from TE11 mode by the proper corrugation dimensions which size are available to be fabricated under the mm-wave short wavelength condition. In this paper, corrugate profiles which satisfy both hybrid condition and fabrication possibility are obtained.. By cylindrical mode theory, the electromagnetic fields both inside hem and corrugation are delivered. Propagation characteristics in hem is calculated by the mode impedance matching method with boundary conditions, and radiation fields are obtained by the Kirchhoff-Hyugen principle to the hem aperture fields. A mm-wave corrugated horn operates on 85 - 115GHz is designed and fabricated, and results of measurement are also shown.

• 한국레이저가공학회지
• /
• 제2권2호
• /
• pp.18-26
• /
• 1999

An innovative real-time weld monitoring technique using chromatic filtering of the thermal radiation from a weld pool is developed. The thermal radiation from the weld pool is focused on an aperture and the transmitted thermal radiation is monitored at two wavelengths with high-speed single-element detectors. Due to the chromatic aberration introduced in the focusing optics, the transmittance curve of thermal radiation varies by the wavelength. Owing to this difference in the transmittance, the local variation of thermal radiation from the weld pool can be monitored by processing the two spectroscopic signals from two detectors. In this paper, the algorithms to monitor the laser power on the weld specimen and the focus shift we investigated and the performances of laser power and focus monitoring are shown for a pulsed Nd:YAG laser welding. The monitoring of the weld pool size variation is also discussed.

• 소음진동
• /
• 제5권1호
• /
• pp.37-48
• /
• 1995

The prediction of sound pressure using acoustic holography has been recognized as a useful tool for the visualization of sound field. Cylindrical acoustic holography amongst acoustic holographic methods planar, spherical, and cylindrical ones-has a wide range of application since its rather simple construction and easy implementation for the sources. To utilize the propery of cylindrical holographic method, estimation errors associated with holographic parameters such as aperture size and sampling space must be envisaged. In this these errors have been studied by numerical simulation and the relation between the errors and the spectrum in wavenumber domain is described. The results are also confirmed by simple experiments.