• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1031-1032
• /
• 2007

Gap servo NF (Near Field) system is one of technologies to reduce beam spot size by increasing NA (Numerical Aperture) of lens. To achieve higher NA, SIL (Solid Immersion Lens) is used. In the case of using a blue LD (405 nm) as the light source the gap distance should be controlled under 100 nm with much tighter margin. Because of very small gap distance between SIL bottom and the surface of media, relative tilt tolerance is limited. In this paper, we presented 2-axis tilt mechanism for skew adjustment within small tilt margin.

• Current Optics and Photonics
• /
• v.4 no.1
• /
• pp.16-22
• /
• 2020

In high resolution imaging devices, smaller aperture in the color filter causes cross talk which provides incorrect information. Plasmonic color filters (PCFs) have been reported as an alternative of the conventional color resist based-color filter (CRCF) and many studies on PCFs demonstrated the filtering function by PCFs with a sub-micron size. In this work, we investigated the cross talk performance of PCFs compared to CRCFs. The effect of cross talk over distance from the filter were measured for each filter. Despite poorer spectral filtering characteristics, PCFs were more robust against cross talk than CRCFs. Also, the further away from the filter, the more cross talk appeared. As a result, PCFs showed less cross talk than CRCFs at about 82% of the results measured at a distance of 2~10 ㎛. This study will help to make practical use of PCFs in high-resolution imaging applications.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.147-151
• /
• 2000

This paper presents an analysis of a slot on the broad wall of a rectangular waveguide using the 3D FDTD method. In order to reduce the reflection loss, Mur's 2nd absorbing boundary condition is used. To realize the optimum design by FDTD, the effects of time step, excitation aperture size, analysis region and excitation position in model are derived. The analysis results are compared with the experimental results and they show a good agreement with each other.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.874-875
• /
• 2008

Gap servo NFR (Near Field Recording) system is one of technologies to reduce beam spot size by increasing NA (Numerical Aperture) of lens. To achieve high NA, SIL (Solid Immersion Lens) is used. In case of using a blue LD (405 nm) as the light source the gap distance should be controlled under 100 nm with much tighter margin. To develop NFR disc drive with very small gap distance between SIL bottom and the surface of media, we need to research for the vibration characteristics and design considerations. This paper deals with a study on vibration characteristic of NFR disc drive.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.7
• /
• pp.989-1002
• /
• 1995

In this paper, we propose a new algorithm, so called the Signal Decorrelation via Virtual Translation of Array (SDVTA) algorithm, for estimating the directions of arrival(DOA's) of narrowband coherent signals incident on a general array. An effective procedure is composed of transforming the steering matrix of the original array into that of the virtually translated sensor array and taking the average of the transformed covariance matrices in order to decorrelate the coherent signals. The advantage of this approach is in that 1) it can estimate the DOA's of m-1 coherent signals(M : the number of array sensors) since the effective aperture size is never reduced. 2) a geometry of array is unrestricted for solving the narrowband coherency problem. 3) the efficiency of signal decorrelation does not depend on the phase differences between coherent signals unlike the Coherent Signal Subspace Method (CSM). Simulation results are illustrated to demonstrate the superior performance of this new algorithm in comparison with the normal MUSIC and examine the comparative performance with the various choices of the optimal transformation matrix under coherent signal environments.

• Publications of The Korean Astronomical Society
• /
• v.8 no.1
• /
• pp.1-15
• /
• 1993

We made a pyramidal horn antenna system for 21cm cosmic radio wave. The antenna system has a rectangular waveguide with $TE_{10}$ mode and a copper probe to detect the electromagnetic wave in waveguide. The parameters of the probe are obtained by experiments using two waveguides. Pyramidal horn antenna is designed to get a gain of 20dB. The size of the aperture of this horn is $94cm{\times}74cm$. The beam width of half power is about $14.7^{\circ}$ for the frequency of 1.4GHz. The horn is made of aluminum plate with a thickness of 2mm. The signal from horn and waveguide is amplified in a receiver system and is converted into DC in the detecter. The intensity of the signal is recorded on a chart recorder. We observed the sun using this simple radio telescope and obtained the brightness temperature of $2.2{\times}10^5K$, which indicates that the sun is quiet at 21cm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.2
• /
• pp.50-55
• /
• 2012

Fabry-Perot (FP) resonator antennas with scan capabilities are described in this paper. The proposed antennas, excited by a thinned array, not only achieve higher directivities but also improve suppression of sidelobes relative to that of the thin array alone. Compared to the conventional microstrip patch array, the directivity enhancement and suppression of sidelobe level were achieved by increase of the aperture size of the proposed Fabry-Perot resonator antenna.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.487-491
• /
• 2003

Design procedure of corrugated horn antenna for mm-wave frequency range is presented, and hybrid condition in horn is calculated. Balanced hybrid mode should be converted in the horn from TE11 mode by the proper corrugation dimensions which size are available to be fabricated under the mm-wave short wavelength condition. In this paper, corrugate profiles which satisfy both hybrid condition and fabrication possibility are obtained.. By cylindrical mode theory, the electromagnetic fields both inside hem and corrugation are delivered. Propagation characteristics in hem is calculated by the mode impedance matching method with boundary conditions, and radiation fields are obtained by the Kirchhoff-Hyugen principle to the hem aperture fields. A mm-wave corrugated horn operates on 85 - 115GHz is designed and fabricated, and results of measurement are also shown.

• Laser Solutions
• /
• v.2 no.2
• /
• pp.18-26
• /
• 1999

An innovative real-time weld monitoring technique using chromatic filtering of the thermal radiation from a weld pool is developed. The thermal radiation from the weld pool is focused on an aperture and the transmitted thermal radiation is monitored at two wavelengths with high-speed single-element detectors. Due to the chromatic aberration introduced in the focusing optics, the transmittance curve of thermal radiation varies by the wavelength. Owing to this difference in the transmittance, the local variation of thermal radiation from the weld pool can be monitored by processing the two spectroscopic signals from two detectors. In this paper, the algorithms to monitor the laser power on the weld specimen and the focus shift we investigated and the performances of laser power and focus monitoring are shown for a pulsed Nd:YAG laser welding. The monitoring of the weld pool size variation is also discussed.

• Journal of KSNVE
• /
• v.5 no.1
• /
• pp.37-48
• /
• 1995

The prediction of sound pressure using acoustic holography has been recognized as a useful tool for the visualization of sound field. Cylindrical acoustic holography amongst acoustic holographic methods planar, spherical, and cylindrical ones-has a wide range of application since its rather simple construction and easy implementation for the sources. To utilize the propery of cylindrical holographic method, estimation errors associated with holographic parameters such as aperture size and sampling space must be envisaged. In this these errors have been studied by numerical simulation and the relation between the errors and the spectrum in wavenumber domain is described. The results are also confirmed by simple experiments.