• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.57-62
• /
• 1995

The coating condition of reproducible anti-reflective coating film and the light transmittance characteristics of the prepared anti-reflective coating glass were investigated as a study for the preparation of single-layer anti-reflective coating glasss. In case of coating with the sol in which the solvent was substituted with the ethanol with the addition of 0.1 mol HNO3, the coated glass showed the minimum value of the refractive index of 1.464, light transmittance of 94.2% at 550nm standard wavelength which is 3.2% higher than that of the parent glass, and the reflectance in the entire wave range of visible light. The refractive index represented its minimum at the sol concentration of 1.0 mol per 100mols of water and the higher the sol concentration, the higher the refractive index, resulting in the decrease of the light transmitance. The production condition of the reproducible anti-reflective coating on glass with the maximum transmittance of 94.2% was 4cm/min of withdrawal speed, 40$0^{\circ}C$ and 1 hour of heat treatment temperature and time, resulting in the film thickness of 94nm.

• Journal of Plant Biotechnology
• /
• 제43권2호
• /
• pp.248-254
• /
• 2016

본 연구에서는 인천광역시 강화군의 특화작물을 이용한 기능성 소재를 개발하기 위해 순무 캘러스를 배양하고 열수, 초음파 그리고 에탄올 추출하여 생리활성을 평가하였다. 순무 캘러스의 열수, 초음파 그리고 에탄올 추출물에서 DPPH radical소거활성이 대조군에 비해 농도 의존적으로 증가하였다. 순무 캘러스 에탄올 추출물의 수렴효과는 열수 및 초음파 추출물보다 높게 나타났다. 콜라겐 생합성량을 측정한 결과 순무 캘러스 에탄올 추출물의 5 ppm과 10 ppm 농도에서 59%와 78%의 주름개선 효과를 확인하였다. 이러한 결과들은 순무 캘러스의 열수, 초음파 그리고 에탄올 추출물이 천연 항산화 소재로의 활용이 가능할 것으로 사료되며 특히, 에탄올 추출물은 수렴효과와 주름개선 효과가 뛰어나 기능성 화장품 천연소재로서의 활용이 가능할 것으로 기대된다.

• Preventive Nutrition and Food Science
• /
• 제21권3호
• /
• pp.236-244
• /
• 2016

In this study, we compared the anti-inflammatory activity of Pinus koraiensis cone bark extracts prepared by conventional extraction and microwave-assisted extraction (MAE). Water extracts and 50% ethanol extracts prepared using MAE were applied to RAW 264.7 cell at 5, 10, 25, and $50{\mu}g/mL$ of concentrations, and tested for cytoxicity. The group treated with $50{\mu}g/mL$ of 50% ethanol extracts showed toxicity. In order to investigate the inhibition of nitric oxide (NO) production in RAW 264.7 cells, extracts of water and ethanol were treated with 5, 10, and $25{\mu}g/mL$ concentrations. The inhibitory activity of water and 50% ethanol extracts groups were determined as 40% and 60% at $25{\mu}g/mL$ concentration, respectively. We found concentration dependent decreases on inducible NO synthase. The inhibitory effect against forming inflammatory cytokines, prostaglandin $E_2$, tumor necrosis factor-${\alpha}$, interleukin (IL)-6, and IL-$1{\beta}$, was also superior in the $25{\mu}g/mL$ treated group than the control group. According to these results, the water extracts and 50% ethanol extracts both inhibited inflammatory mediators by reducing the inflammatory response. Therefore, The MAE extracts of P. koraiensis cone bark can be developed as a functional ingredient with anti-inflammatory activity.

• 한국항해항만학회지
• /
• 제27권4호
• /
• pp.455-463
• /
• 2003

저질의 부유 현상이 일련의 쇄파라고 하는 파동 현상에 어떠한 형태로 연동하는가를 면밀히 조사하기 위하여 현지해안의 쇄파대내에 주 관측지점을 설치하고 부유사 농도와 유속, 수위변동 등의 관련 파랑 제원을 계측하였다. 분석을 위해 수위변동, 유속변동치의 부유사 농도에 대한 상관관계를 조사하였으며, 상관이 탁월한 주기대에 대한 ensemble 평균 분석으로 유속 및 수위변동의 위상에 따른 부유사 농도의 변화와의 관계를 명백히 하여 다음의 결론을 얻었다. 1) 부유사의 농도 변동은 유속 및 수위변동의 에너지가 가장 큰 장주기 성분(100s)에 있어서 보다 오히려, 관측지점이 절(node)이 되는 1차mode의 장주기중복파(60s) 및 배(anti-node)가 되는 2차 mode의 중복파(30s)의 주기성분에서 상관이 높았으며, 2)또한, 1차 mode의 장주기중복파의 유속 성분이 해안으로 향하여 가속하는 위상 즉, 수면 경사가 상대적으로 해안선측보다 외해측이 높은 위상에서 부유사 농도가 가장 높아짐을 명백히 하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.30-35
• /
• 2004

Several roll motion reduction devices are reviewed and suggested for the application in FPSO. The firstly suggested solution is the shape of the bilge. The next is a bilge keel. The last suggestion is the ART (anti-rolling tank). Typical U-tube type ART is designed for a FPSO and examined extensively by model experiment. The model section was made of transparent acryl. Free decay test, forced oscillation test and wave test were carried out at a two-dimensional wave flume. U-tube type ART is effective only when the natural periods of ART and ship are same. Therefore, the divided U-tube type ART with split plate is suggested for the reduction of the roll motion of a FPSO over the wide range of the roll period.

• 한국해양공학회지
• /
• 제13권4호통권35호
• /
• pp.132-142
• /
• 1999

A three-dimensional linearised potential theory is presented for the prediction of motions and dynamic structural responses of twin-hull ships travelling with forward speed in regular waves. Comparisons between theoretical and experimental results are shown for the motion responses and lateral wave loads of an ASR(anti-submarine rescue) catamaran. In general, good agreement between theory and experiment is found except for some discrepancies that are believed to be caused by neglect of forward speed effects on free surface.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.117-122
• /
• 2005

This paper proposes an inverter for the grid-connected photovoltaic system based on the transformer-less inverter. This system consists of a high frequency converter bridge, high frequency transformer, diode bridge rectifiers, a DC filter, a low frequency inverter bridge, and an AC filter. The high frequency converter bridge switching at 20kHz is used to generate bipolar PWM pulse, and the high frequency transformer raise its voltage twice, which is subsequently rectified by diode bridge rectifiers to result in a full-wave rectified sine wave. Finally, it is unfolded by a low frequency inverter bridge to result in a 60Hz sine wave power output. Even though the high frequency link system needs more power semiconductors, a reduced size, light weight, and saved parts cost make this system more comparative than the other systems due to elimination of 60Hz transformer.

• 한국의류학회지
• /
• 제36권4호
• /
• pp.382-390
• /
• 2012

This study shows the optimum attachment of Two-Way Shape Memory Alloy (TWSMA) springs onto thermal liner and its sewing method for the mass production of fire fighter's intelligent turnout gear. SMA springs were attached to the fabric by four different methods and stitched by two different shapes (square and wave). The durability of the attached springs was tested by laundering up to 50 cycles. Examined were whether the springs would remain attached to the fabric after repeated laundering, the shape memory effect and reaction of the springs, and the anti-corrosiveness of the springs. A Human-Clothing-Environment simulator evaluated thermal insulation according to attachment methods, air layer volume, and stitch types. The findings showed that silicon attached springs remained intact after repeated laundering; in addition, repeated laundering did not influence the responsiveness and anti-corrosiveness of SMAs. Air volume had positive relations with the insulation. Attachment methods or stitch methods had limited impact on the thermal insulation. As a result, a wave type stitch with silicone attachment was suggested as the optimum method to attach the SMA springs onto the intelligent turnout gear for fire fighters.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2011년도 전기공동학술대회 논문집
• /
• pp.192-192
• /
• 2011

For the safety of vessels sailing Marine Transport Facility announces sea route, reefs or shallow water. Photovoltaic, independent power system, installation in the general Marine Transport Facilities to be used in the marine lantern. Due to install of communications, controls, power consumption inceases. And the weather of cloudy day or rainy, generation of electricity is decrease. Recently, power system of marine facility using a hybrid generation system, photovoltaic generation system and wave power generation system. But increase of adhered shellfish inside the water column, is the cause of the reduction of efficiency. So study was conducted to Single channel AFS(Anti-Fouling system). In this paper we offer the Multi channel AFS for Marine Transport Facility and have simulated. Improve the accuracy of the research, we using the result of anode, in the experiment were actually in the buoy, is based on simulation. The experimental results is shown every anode's, in the Marine Transport Facility, ionization was conducted identically.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.124-130
• /
• 2009

This study presents a finite element simulation of elastic waves for detecting anti-symmetric damages in an adhesively-bonded single lap joint. Plane strain elements were used for modeling adherents (aluminum) and adhesives (epoxy). Three types of damage were introduced: thickness reduction, elasticity deterioration, and voids in the adhesive layers, and two excitation and reception arrangements (ER1 and ER2) were used to investigate the detectability of the damage. The simulation showed that symmetrically located damage, such as a thickness reduction, can be detected by one excitation and one reception arrangement (ER1) and anti-symmetric damages, such as elasticity deterioration and voids, can be detected by modified two-point elastic wave excitation (ER2). Compared with the ER1 arrangement, the ER2 arrangement does not require a baseline signal for damage detection; hence, an efficient method of anti-symmetric damage detection in an adhesively-bonded single lap joint is proposed.