• 한국운동역학회지
• /
• 제17권1호
• /
• pp.121-127
• /
• 2007

Muscle force produced by muscle fibers is transmitted to bones via tendinous structures(aponeuroses and tendon), resulting in joint(s) movement. As force-transmitting elements, mechanical behavior of aponeuroses and tendon are closely related with the function of muscle-tendon complex. The purpose of this study was to determine strain characteristics of aponeuroses for in-vivo human soleus muscle during submaximal voluntary contractions using an advanced medical imaging technique, velocity-encoded phase-contrast magnetic resonance imaging (VE-PC MRI). VE-PC MRI of the soleus muscle-tendon complex was acquired during submaximal isometric plantarflexion contraction-relaxation cycle (n = 7), using 3.0T Trio MRI scanner(Siemens AG, Malvern, MA). From the VE-PC MRI containing the tissue velocity in superior-inferior direction, twenty regions of interest(20 ROI; 10 on the anterior aponeurosis and 10 on the posterior aponeurosis) were tracked. During the isometric plantarflexion contraction-relaxation cycle, velocity and displacement profiles were different between the anterior and posterior aponeuroses, indicating heterogeneous strain behavior along the length of the leg. The anterior aponeurosis elongated while the posterior aponeurosis shortened during the initial phase of the contraction. Moreover, strain behavior of the posterior aponeurosis was different from that of the Achilles tendon. Possible explanation for the observed variations in strain behavior of aponeuroses was investigated with morphological assessment of the soleus muscle and it was found that the intramuscular tendinous structures significantly vary among subjects. In conclusion, the heterogeneous mechanical behavior of the soleus aponeuroses and the Achilles tendon suggests that the complexity of skeletal muscle-tendon complex should be taken into consideration when modeling the complex for better understanding of its functions.

• 대한소아치과학회지
• /
• 제27권4호
• /
• pp.479-484
• /
• 2000

III급 부정교합, 특히 전치부 반대 교합은 부모나 주위 사람에 의해 쉽게 인지되기 때문에 비교적 어린 시기에 내원하는 빈도가 높아지고 있다. 이에 따라 치과의사는 치료시기에 대한 결정, 적절한 case의 선택, 장기간에 걸친 치료, 치료후의 재발 등에 대한 심리적 부담감을 안게 되며 보호자 또한 시간적, 경제적인 어려움을 겪게 된다. 그러나, 반대 교합 그 자체는 조기 개선시 상악골의 성장 저해를 막을 수 있으며, 하악 과성장을 억제함으로써 기능성 인 경우에 골격성으로의 발전을 억제 할 수 있다. 그리고 상하악골의 골격 부조화가 매우 크거나 좋은 예후를 기대하기 힘든 골격 구조에 대해서도 정확한 평가가 병행 되어야 한다. 골격성 III급 부정교합으로 내원한 환아를 성장기 동안 치료함으로써 다음과 같은 결론을 얻었다. 1. 상악골의 정상적 인 성장 저해 요소를 제거하고, 하악골의 과성장을 조절해줌으로써 전치부 반대교합을 해소하였다. 2. 상악골과 상악 전치는 전하방으로, 하악골과 하악 전치는 후하방으로 이동하였다. 3. 경조직, 연조직의 변화로 인해 안모의 개선을 나타내었다.

• 대한두개안면성형외과학회지
• /
• 제18권4호
• /
• pp.230-237
• /
• 2017

Background: The traditional approach for reduction of frontal sinus fractures is coronal incision. Inherent complications of the coronal approach include long scar, hair loss, and long operation time. We describe a simple approach for the reduction of frontal sinus anterior wall fractures using a suprabrow incision that is commonly used for brow lift. Methods: From March 2007 to October 2016, the authors identified patients with anterior wall frontal sinus fractures treated by open reduction through a suprabrow incision. Only cases with photographic/radiographic documentation and a minimum follow-up of 6 months were included. The incision line was designed to be at the upper margin of the eyebrow. Medical records and radiographic data were retrospectively reviewed. Surgical outcomes, cosmetic results, and complication were assessed. The patient scale of the patient and observer scar assessment scale was used to assess patient satisfaction for incisional scar at the 6-month follow-up. Results: Thirty-one patients underwent fracture reduction through a suprabrow approach during the study period, with a mean follow-up of 41 months. No patients showed any recurrent displacement, eyebrow asymmetry, or infection during follow-up. Thirteen patients reported their forehead paresthesia postoperatively, and 12 of them had preoperative symptom. One patient complained of incisional scar and underwent scar revision. All patients were satisfied with their eyebrow and forehead contour. Conclusion: The suprabrow approach allowed for an accurate reduction of the fractures in the anterior wall frontal sinus by providing direct visualization of the fracture. This transcutaneous approach can effectively restore forehead contour with acceptable postoperative complications and patient satisfaction.

• 대한치과보철학회지
• /
• 제31권3호
• /
• pp.351-384
• /
• 1993

Complete denture occlusion must be developed to function efficiently and with the least amount of trauma to the supporting tissues. For the preservation of supporting tissues, it is imperative to reduce to a minimum the functional stress induced by dentures. The magnitude of the horizontal component of functional stress contributed by various occlusal teeth forms has not been studied. This study was aimed to investigate the influence of different occlusal teeth forms on the mode of distribution of the stresses in the mandibular tissue, and the displacement of lower dentures during the variant functional movement of mandible for this study three dimensional finite element analysis was used. FEM models were created using commercial software Super Sap for IBM 32 bit computer. The model was composed of 3380 brick elements and 4346 nodes. The results were as follows. 1. The magnitude of stress was similar between two models in centric occlusion, in the case of anatomic model, the stress was concentrated on the buccal side of alveolar ridge beneath the bicuspids. 2. During the protrusive movement, the increasing of stress from the posterior to anterior part of mandible was seen in the case of anatomic model. 3. During the lateral movement, the stress of anatomic model was greater than that of nonanatomic model. 4. The stress of anatomic model was concentrated on the anterior region of residual ridge during the lateral movement. 5. In the case of anatomic model the anterior part of denture was displaced severely at the centric and lateral position, but the denture of nonanatomic model was displaced minutely at the protrusive and lateral position.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권3호
• /
• pp.207-217
• /
• 2010

The purpose of this study was to evaluate the effects of the stress distribution and displacement in mandible according to treatment modalities of mandibular angle fractures, using a three dimensional finite element analysis. A mechanical model of an edentulous mandible was generated from 3D scan. A 100-N axial load and four masticatory muscular supporting system were applied to this model. According to the number, location and materials of titanium and biodegradable polymer plates, the experimental groups were divided into five types. Type I had a single titanium plate in the superior border of mandibular angle, type II had two titanium plates in the superior tension border and in the inferior compression border of mandibular angle, type III had a single titanium plate in the ventral area of mandibular angle, type IV had a single biodegradable polymer plate in the superior border of mandibular angle, type V had a single biodegradable polymer plate in the ventral area of mandibular angle. The results obtained from this study were follows: 1. Stress was concentrated on the condylar neck of the fractured side except Type III. 2. The values of von-Mises stress of the screws were the highest in the just-posterior screw of the fracture line, and in the just-anterior screw of Type III. 3. The displacement of mandible in Type III was 0.04 mm, and in Type I, II, IV, and V were 0.10 mm. 4. The plates were the most stable in the ventral area of mandibular angle (Type III, V). In conclusion, the ventral area of mandibular angle is the most stable location in the fixation of mandibular angle fractures, and the just- posterior and/or the just-anterior screws of the fracture line must be longer than the other, and surgeons have to fix accurately these screws, and the biodegradable polymer plate also was suitable for the treatment of mandible angle fracture.

• 대한치과교정학회지
• /
• 제35권5호
• /
• pp.398-407
• /
• 2005

본 연구는 안면비대칭이 있는 환자의 측두하악관절원반 형태와 위치를 평가하고 악관절내장증과 안면비대칭 간의 관계를 규명하기 위하여 시행되었다. 남자 10명 및 여자 27명으로 구성된 안면비대칭 환자 37명의 74개의 TMJ MRI를 사용하였으며, 대상 집단의 연령은 12세에서 44세까지의 범위로 평균 21.4세였다. 시상 및 두정 TMJ MRI를 최대감합위 및 최대개구위에서 채득한 후 부분전방변위, 전방변위, 회전 또는 측방원반변위 등 원반변위의 종류를 기록하였으며, 원반의 모양위치, 그리고 원반의 변위 및 회전을 MRI tracing 상에서 판독하였다. 악관절내장증의 증상은 정상, 정복성 전방원반변위(ADDR), 그리고 비정복성 전방원반변위 (ADDNR) 집단으로 분류하였으며, 환자는 양측성 정상. 편측 혹은 양측 내장증 집단으로 분류하였다. 약$70\%$의 환자에서 편측성 또는 양측성 내장증을 보였으며. 통계분석 결과 ADD, 특히 회전성 ADD가 변위측에서 더 높은 빈도로 나타났으나 반대측에서는 원반의 위치가 정상인 경우가 많았다. (p<0.01). 변위측의 원반은 모양의 변형 및 하전방 변위를 유의하게 더 나타냈다. 그러나 반대쪽은 개구시 원반이 수직방향으로 과운동성이 관찰되었다. 이 연구는 안면비대칭 환자에서 ADD의 종류가 원반의 모양, 경사 변위 각도, 변위의 수직거리 및 회전각도와 연관이 있다는 것을 제시한다

• 대한치과보철학회지
• /
• 제18권1호
• /
• pp.73-86
• /
• 1980

Recently, the controversy continues as to whether maximum intercuspation of teeth should occur at the terminal hinge position(the condylar theory) or at the myo-co(the neuromuscular theory). There is also much controversy regarding the antero-posterior position of myo-co. The object of this study was to measure and compare with the positional relations of centric relation, centric occlusion and myo-co, and free-way space using Mandibular Kinesiograph and Myo-monitor in the 40 subjects without stomatognathic problems. Mandibular Kinesiograph(M.K.G.) was originally conceived as a research instrument to track mandibular movement and position. As its use in research progressed, its great diagnostic value became apparent in case by case. And Myo-monitor was developed as a means of applying the neuromuscular approach to occlusion. Thus the Myo-monitor technique is an intra-systemic approach to occlusal positioning using patient's own musculature, and Myo-monitor is used to relax the musculature by a light myopulse induced electronically. From this experiment, the following results were obtained. 1. The adaptive free-way space before muscle relaxation was an average of $1.6{\pm}60mm$, and the true free-way space after muscle relaxation using Myo-monitor was an average of $2.4{\pm}0.74mm$. 2. It took an average of $25{\pm}3.11$ minutes to relax the mandibular musculature by Myo-monitor and administration of 5mg. Diazepam and an average of $38{\pm}4.73$ minutes by Myo-monitor without administration of Diazepam. 3. Myo-co existed anterior to centric occlusion, with an average of $0.53{\pm}0.31$ mm, and centric relation existed posterior to centric occlusion, with an average of $0.57{\pm}0.58mm$ before muscle relaxation and with an average of $0.57{\pm}0.43mm$ after muscle relaxation. 4. Centric relation coincided with centric occlusion in 5 of 40 subjects(12.5%), and posterior to centric occlusion in the rest of cases (87.5%). 5. Myo-co existed anterior to centric occlusion in 38 of 40 subjects(95%), except 1 subject that coincided with centric occlusion and 1 subject that existed posterior to centric occlusion. 6. Myo-co and centric relation existed inferior to centric occlusion and the lateral displacement was various with individual difference. 7. The total displacement from centric occlusion to centric relation was an average of $0.74{\pm}0.64mm$ before muscle relaxation, and an average of $0.68{\pm}0.53mm$ after muscle relaxation, and the total displacement from centric occlusion to myo-co was an average of $1.07{\pm}0.58mm$.

• 대한의용생체공학회:의공학회지
• /
• 제21권3호
• /
• pp.295-301
• /
• 2000

뼈의 성장에 미치는 많은 요소들 중에서 implant의 상대적인 미세운동(relative micromotion)은 뼈의 implant와의 접합을 방해하는 것으로 알려져 왔다. 그런데 이러한 상대적인 운동 및 spinal stability에 직접적으로 영향을 주는 하중조건, spinal material의 물성치, spinal geometry 및 뼈와 implant의 접촉면에서의 마찰계수를 고려하기 위하여, 하나의 titanium interbody cage 가 삽입된 human lumbar segments (L4-L5)의 유한요소 모델이 개발되었다. 이러한 유한요소 모델의 해석을 통하여 상대적인 미세운동, Posterior의 수직적인 변위, von Mises 응력 및 마찰력이 예측되었다. Cancellous bone. annulus fibers 및 ligaments의 기계적인 물성치의 감소 또는 접촉면에서의 마찰계수의 감소는 상대적인 미세운동 (relative micromotion or slip distance)을 증가 시켰다. 접촉면에서의 normal force는 뼈의 밀도 (cancellous bone density) 가 감소하거나 접촉마찰계수가 증가하면 감소했다. 특히 하중조건에 있어서, compressive preload에 대한 torsion의 추가는 접촉면의 anterior부위에서 상대적인 미세운동을 증가 시켰다. 하지만 디스크면적이 증가할수록 상대적인 미세운동은 감소했다. 결론적으로, 접촉면의 기계공학적 거동 (Relative micromotion, stress response, posterior axial displacement and contact normal force)은 접촉면의 마찰계수 뼈의 밀도, 하중조건 및 노화에 따른 형상/물성의 변화에 매우 민감함을 보이고있다.

• 대한치과교정학회지
• /
• 제18권2호
• /
• pp.367-385
• /
• 1988

In case of skeletal Class III malocclusion with underdeveloped maxilla, the extraoral orthopedic force for the stimulation of maxillary growth or anterior reposition of the maxilla has been used clinically for the improvement of facial skeletal relationship. The purpose of this investigation was to examine the initial reaction of maxillofacial complex to the maxillary protraction by using extraoral orthopedic force. The dried human skull was used and this investigation was done by means of double exposure holographic interferometry. The protraction forces placed on the canine or the first molar were parallel, $10^{\circ}$ downward, $20^{\circ}$ downward to the occlusal plane. Fringe pattern of each protraction condition was compared and analized. The results were as follows: 1. Each maxillofacial bone displaced saparately. 2. More displacement was shown at the area of the teeth and the alveolar bone. 3. A counterclockwise rotation of the maxilla wa decreased by downward protraction and especially 20 degree downward protraction from the canine showed least rotation. 4. On the zygomatic arch, outward bend was observed and this effect was decreased by downward protraction. 5. On the zygomatic bone, the counter clockwise rotation was increased by the downward protraction. 6. When maxillary expansion was applied at the same time, outward and upward displacement with counterclockwise rotation was observed on the maxilla. 7. The lateral pterygoid plate of sphenoid bone was affected by maxillary protraction.

• 대한치과교정학회지
• /
• 제43권2호
• /
• pp.74-82
• /
• 2013

Objective: The purpose of this study was to evaluate displacement of the mandibular condyle after orthognathic surgery using a condylar-repositioning device. Methods: The patient group comprised 20 adults who underwent bimaxillary surgery between August 2008 and July 2011. The degree of condylar displacement was measured by pre- and postoperative tomographic analysis using centric relation bite and a wire during surgery. A sur vey assessing temporomandibular joint (TMJ) sound, pain, and locking was performed. The 20 tomographs and surveys were analyzed using the Wilcoxon signed-rank test and McNemar's test, respectively. Results: No significant changes were observed in the anterior, superior, or posterior joint space of the TMJ (p > 0.05). In addition, no significant change was observed in TMJ sound (p > 0.05). However, TMJ pain and locking both decreased significantly after surgery (p < 0.05). Conclusions: Due to its simplicity, this method may be fea sible and useful for repositioning condyles.