• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.418-421
• /
• 2008

This paper presents the program to analyze an antenna for using the Moment Method. The program contains three different functional steps. In the first stage, the pre-processor is based on the Delaunay Triangulation Algorithm. The next stage, the main-processor, can be considered the core process of the program, which solutions are obtaining the linear matrix for using the Moment Method. The final stages, the name of the post-processor, analyze radiation patterns, which results are same with the S-parameters. The results demonstrate satisfactory agreement with the results for using other numerical packages and measurement data. We can confirm that the results of this program compare with the results of common program to analyze for an antenna.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.811-816
• /
• 2011

In this paper, we propose a optimal design using the Evolution Strategy of a high gain $4\times4$ array antenna that have the resonant frequency of a 19.05GHz with 18.86GHz~19.26GHz bandwidth. The proposed array antenna structure is designed to be allocated equally electric power by microstrip patch power splitter. Thus the optimal array antenna with power splitter are determined by using an optimal design program based on the evolution strategy. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is constructed for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The simulation result of $4\times4$ array antenna is confirmed that the Gain is 19.36 dBi at resonance frequency 19.05GHz.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2293-2298
• /
• 2011

In this paper, A tag antenna structure for RFID application with resonant frequency of 920MHz is proposed using the meander line technique and Evolution Strategy. Miniaturization structure design for a tag antenna is performed by structure combining the half-wave dipole with a meander line. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is made for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The optimized tag antenna size is 63mm ${\times}$ 15mm ${\times}$ 1mm. And the proposed antenna is realized on FR-4 substrate (${\epsilon}_r=4.4$, $tna{\delta}=0.02$).

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.221-224
• /
• 2009

In this paper, we deal with the development of an optimal design program for a dual-band of 0.92 GHz and 2.45 GHz with shorting pin and slot by using evolution strategy. the optimal shorting pin, coaxial feed and H-shaped patch are determined by using an optimal design program based on the evolution strategy. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is constructed for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The resonance frequencies of the dual-band antenna yielded by the optimal design program are 0.92 GHz and 2.45 GHz that show a good agreement to the design target values.

• Composites Research
• /
• v.25 no.6
• /
• pp.224-229
• /
• 2012

The structural performance is degraded in case of embedding the array antenna for reconnaissance and surveillance into the wing skin structures. In this paper, the optimal design for the thickness of composite hat-shaped stiffener which is reinforced embedded array antenna on the simplified composite wing box was conducted. To select the basic shape of hat-shaped stiffener, structural analysis was carry out using the commercial finite element analysis program while changing the web slope and flange length of hat-shaped stiffener. The optimal thickness of the composite hat-shaped stiffeners was determined by using commercial optimization program such as VisualDOC and commercial FEA program with considering stresses and buckling constraints.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.560-564
• /
• 2003

In this paper, we carried out performance analysis of mobile station with built-in antenna for PCS(Personal Communication System) band. The radiation patterns for antenna and mobile phone were simulated by using 3D simulation program, HFSS(High Frequency Structure Simulator) and SEMCAD(Simulation Platform for Electromagnetic Compatibility Antenna Design Dosimetry). We observed radiation pattern variation according to installation of LED(Light Emitting Diode) circuit and ground pattern. The radiation pattern of prototype mobile phone was measured, and the radio sensitivity was measured by using Agilent E5515C and chamber. The measured maximum antenna gain at 1.87GHz was 0.21dBi. The measured radio sensitivity of prototype mobile phone shows proper performances comparable to other models with external antennas.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.185-188
• /
• 2006

본 논문에서는 Moment 법을 이용한 안테나 해석 프로그램에 대해 다룬다. Delaunay 삼각화 알고리즘에 근거하여 pre-processor를 구현한다. Moment법을 이용하여 main-processor를 구현한다. S-parameter를 주파수 영역과 Smith Chart에 표시하고, 방사패턴을 다양한 각도에서 확인 할 수 있도록 post-processor를 구현한다. 해석 결과의 신뢰성을 위해 20GHz 에서 동작하는 고 이득 및 고지향성을 갖는 마이크로스트립 패치 안테나 어레이를 설계하고 이를 제작 및 측정한다. 측정결과와 상용 툴의 결과와 구현한 프로그램의 결과를 비교 및 분석한다.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.2
• /
• pp.91-98
• /
• 2022

In the next generation wireless communication system, the beamforming technique based on a massive antenna is one of core technologies for transmitting and receiving huge amounts of data, efficiently and accurately. For highly performed and highly reliable beamforming, it is required to accurately estimate the Angle of Arrival (AOA) for the desired signal incident to an antenna. Employing the massive antenna with a large number of elements, although the accuracy of the AOA estimation is enhanced, its computational complexity is dramatically increased so much that real-time communication is difficult. In order to improve this problem, AOA estimation algorithms based on the massive antenna with the low computational complexity have been actively studied. In this paper, we compute and analyze the computational complexity of the cascade AOA estimation algorithm based on the Flexible Massive Concentric Circular Array (FMCCA). In addition, its computational complexity is compared to conventional AOA estimation techniques such as the Multiple Signal Classification (MUSIC) algorithm with the high resolution and the Only Beamspace MUSIC (OBM) algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2217-2226
• /
• 2007

In this paper, we propose a microstrip antenna with sufficient impedance bandwidths and gains for the 2.65GHz antenna which can be used in the satellite digital multimedia broadcasting. The prposed 2.65GHz satellite DMB bandwidth microstrip antenna is implemented on a substrate, which is small enough to be installed in practical mobile phones, and described simulation feature using by CST MicroWave Studio program. And also, we measured the antenna performance between the proposed antenna and the commercial antenna. From the analysis, it was found that the radiation pattern of proposed antenna is superior to the commercial antenna and an acceptable frequency band is more wider than the existing products.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1587-1595
• /
• 1996

We obtained the predicted and measured results for the reflection coefficient and radiation pattern of Ka-band (20- GHz) corrugated horn, which is usually used for feeder of reflector antenna for satellite communication, using suface impedance condition. In order to predict the reture losses of corrugated horn, we analyzed propagation constant of hybrid mode in the corrugated waveguide and then obtained the total reflection coefficient using the circuti theory of multi-step transformer. We also got the radiation pattern of corrugated horn with small flare angle, considering the phase deviation and integrate transverse field on aperture. A test model of corrugated horn antenna for Ka-band designed using theory and program displayed performance and the results agree with the theoretical prediction.