• 한국지반환경공학회 논문집
• /
• 제8권6호
• /
• pp.61-68
• /
• 2007

본 연구에서는 비등방경화 구성모델을 이용하여 반복재하 평판재하시험에 대한 유한요소해석을 수행하였다. 이 때 구성모델은 ABAQUS 코드에서 제공하는 사용자 서브루틴에 적용하였다. 평판재하시험의 해석결과를 이용하여 영계수와 변형률을 역계산 하였으며 입력된 변형계수와 비교한 결과 적절하게 계산할 수 있는 것으로 판단되었다. 이러한 기법을 토대로 평판재하시험 사례에 대한 적용을 수행하였다. 이로부터 변형률에 따른 변형계수의 변화를 반복재하 평판재하시험 결과로부터 실용적으로 획득하는 것이 가능하였다.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.277-286
• /
• 2003

미소변형에서 대변형에 이르는 전변형도 영역의 거동을 모델하기 위하여 비등방 경화규칙과 전응력개념에 의거한 구성관계를 이용하였다. 이러한 구성관계는 ABAQUS 코드에 구현되었으며 대변형해석시 정확도와 수렴속도를 확보하도록 하였다. 이 정식화는 Jaumann 응력속도에 의거한 유한 변형도 소성론, 내재적 응력적분, 일관된 접선계수를 포함한다. ABAQUS를 이용한 대변형해석을 통하여 알고리즘의 정확도 및 수렴도 해석을 할 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.21-27
• /
• 1998

An analysis for the prediction of wrinkling formation in curved sheets during metal froming is presented. We construct "Wrinkling Limit diagram"(WLD) which represent the combinations of the critical principal stresses for wrinkling formation in curved sheet elements subjected to biaxial plane stress. Here the scheme of plastic bifurcation theory for thin shells based on the Donnell-Mushtari-Vlasov shell theory is used. In this study, the effects of the material variables (yield stress, plastic hardening coefficient, plastic anisotropic parameter, and so on) and sheet geometry on the critical conditions for wrinkling is carried out numerically.merically.

• Structural Engineering and Mechanics
• /
• 제5권6호
• /
• pp.679-689
• /
• 1997

The damage of concrete subjected to multiaxial complex loading involves strong anisotropy due to its highly heterogeneous nature and the geometrically anisotropic characteristic of the microcracks. A comprehensive description of concrete damage is proposed by introducing a fourth-order anisotropic damage tenser. The evolution of damage is assumed to be related to the principal components of the current states of stress and damage. The unilateral effect of damage due to the closure and opening of microcracks is taken into account by introducing projection tensors that are also determined by the current state of stress. The proposed damage model considers the different kinds of damage mechanisms that result in different failure modes and different patterns of microdefects that cause different unilateral effects. This damage model is embedded in a thermomechanically consistent constitutive equation in which hardening and the triaxial compression caused shear-enhanced compaction can also be taken into account. The validity of the proposed model is verified by comparing theoretical and experimental results of plain and steel fiber reinforced concrete subjected to complex triaxial stress histories.

• 소성∙가공
• /
• 제7권6호
• /
• pp.594-602
• /
• 1998

The design analysis of axisymmetric, multi-stage deep drawing dies was performed using the rigid-viscoplastic finite element formulation. In the formulation the axisymmetric CFS algorithm was employed. Hill's non-quadratic normal anisotropic yield criterion and isotropic hardening rule were considered. For trial initial displacements and tool contact points. the geometric force equilibrium method was adopted. In order to see the validity of the formulation, the multi-stage deep drawing processes of shell-cylinder front part of hydraulic booster were simulated. The simulation showed good agreements with measurments and PAM-STAMP results.

• 소성∙가공
• /
• 제16권4호
• /
• pp.234-238
• /
• 2007

Magnesium alloy sheets in room temperature have unusual mechanical properties such as high in-plane anisotropy/asymmetry of yield stress and hardening behavior. In this paper, the continuum plasticity models considering the plastic behavior of AZ31B Mg alloy sheet were derived. A new hardening law based on modified two-surface model was developed to consider the general stress-strain response of metals including Bauschinger effect, transient behavior and the unusual asymmetry. Three deformation modes observed during the continuous tension/compression tests were mathematically formulated with simplified relations between the state of deformation and their histories. To include the anisotropy and asymmetry of the initial yield stress, the Drucker-Prager's pressure dependent yield surface was modified by adding anisotropic constants.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.351-356
• /
• 1999

An elasto-plastic constitutive model was Proposed, in which the behavior at small-to-large strain level can be modeled. From a mathematical approach it was proved that the model includes the previous successful models. The experimental results of a series of resonant column tests, torsional shear tests and triaxial tests were verified and as a result the proposed model could predict small-to-large strain behavior more consistently and accurately than the hyperbolic model and the Ramberg-Osgood model for a weathered granitic soil.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.178-184
• /
• 1995

A new combined isotropic/kinematic and orthotropic hardening viscoplastic model is proposed which can account for not only differential orientations but also preferred orientations of grains in n metal at finite plastic deformations with an introduction of multiple spin (rate of rotation) concept within the general framework of the model, the effects of anisotropy and constitutive spins will be discussed in conjunction with a closed-form solution for simple shear in n rigid-plastic material, which will be used to simulate experimental data of Montheillet, et al. (1984) for fixed-end tortion tests at finite plastic deformations.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 제2회 박판성형심포지엄 논문집 박판성형기술의 현재와 미래
• /
• pp.65-73
• /
• 1998

The design analysis of axisymmetric, multi-stage deep drawing dies was performed using the rigid-viscoplastic finite element formulation. In the formulation, the axisymmetric CFS algorithm was employed. Hill's non-quadratic normal anisotropic yield criterion and isotropic hardening rule were considered. For trial initial displacements and tool contact points, the geometric force equilibrium method was adopted. In order to see the validity of the formulation, the multi-stage deep drawing processes of shell-cylinder front part of hydraulic booster were simulated. The simulation showed good agreements with measurements and PAM-STAMP.

• 한국지반공학회지:지반
• /
• 제12권2호
• /
• pp.9-18
• /
• 1996

실험실에서 재 성형한 정규압밀점토에 대하여 실시된 일련의 삼축압축시험 거동결과를 등방단일경화구성모델에 의한 예측치와 비교검토한다. 이 모델사용에 필요한 열한개의 계수는 등방압밀공시체에 대한 비배수삼축압축시험 결과로부터 간단히 결정된다. 이렇게 결정된 계수를 활용한 이 모델로 이방압밀공시체를 대상으로 한 비배수삼축압축시험시의 응력-변형률 및 간극 수압의 거동이 예측된다. 또한 등방압밀공시체 및 이방압밀공시체를 대상으로 실시한 배수삼축 압축시의 응력-변형률 및 체적변형률 거동예측에도 이 모델을 적용하였다. 예측치와 시험치의 비교결과 비배수삼축압축시험의 경우는 등방압밀공시체와 이방압밀공시체 모두에 좋은 일치를 보이고 있다. 그러나 배수삼축압축시험의 경우는 초기 체적변형률의 예측치가 시험치보다 약간 작게 나타나다가 파괴점에 근접함에 따라서는 예측치가 시험치보다 커지는 경향을 보이고 있다. 그러나 전반적인 응력 -변형률거동은 좋은 일치를 보이고 있음을 알 수 있다. 따라서, 본 연구결과 이 모델은 정규압밀점토의 거동예측에 적용성이 충분히 있다고 생각된다.