• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.10
• /
• pp.543-550
• /
• 2016

Amine-type PP-g-VBC-EDA adsorbent, which possesses anionic exchangeable function, was prepared through photoinduced graft polymerization of vinylbenzyl chloride (VBC) onto polypropylene non-woven fabric and subsequent amination reaction using ethylenediamine (EDA). Adsorption characteristics of anionic nutrients on the PP-g-VBC-EDA adsorbent have been studied by batch adsorption experiments. The equilibrium data well fitted the Langmuir isotherm model, and the maximum monolayer sorption capacity was found to be 59.9 mg/g for $NO_3-N$ and 111.4 mg/g for $PO_4-P$. The adsorption energies were higher than 8 kJ/mol indicating anion-exchange process as the primary adsorption mechanism. The pseudo-second order kinetic model described well the kinetic data and resulted in the activation energy of 9.8-36.7 kJ/mol suggesting that the overall rates of $NO_3-N$ and $PO_4-P$ adsorption are controlled by the chemical process. Thermodynamic parameters such as ${\Delta}G^o$, ${\Delta}H^o$ and ${\Delta}S^o$ indicated that the adsorption nature of PP-g-VBC-EDA for anionic nutrients is spontaneous and exothermic. The PP-g-VBC-EDA could be regenerated by washing with 0.1 N HCl.

• Analytical Science and Technology
• /
• v.13 no.5
• /
• pp.608-615
• /
• 2000

A determination method of trace nickel and cobalt in water samples was studied and developed by adsorbing their complexes on ion exchange resin suspension. The analytical ions were formed as complexes with a ligand of APDC (ammonium pyrrolidinedithiocarbamate) and adsorbed on anion exchange resin of Dowex 2-X8. After the suspension was filtered out with membrane filter, the complexes were dissolved in HCl solution by an ultrasonic vibrator for ET-AAS determination. Several conditions were optimized as followings. pH of sample solution: 5.0, amount of ligand APDC: more than 430 times in mole ratio, the type and concentration of acid: 0.1 M HCl, and vibration time: 7 minutes. The addition of palladium in the HCl solution could improve the reproducibility and sensitivity by a matrix modification in the absorbance measurement. This procedure was applied for the analysis of three kinds of real water samples. The detection limits equivalent to 3 times standard deviation of blank were Co 0.36 ng/mL and Ni 0.27 ng/mL and recoveries in spiked samples were 99-102% for cobalt and 100-105% for nickel.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.4
• /
• pp.407-413
• /
• 1998

The influence of the anion composition of simulated acid rain on cation leaching of two soils with different surface charge properties was examined. Four mixtures of mole ratio of $SO_4:NO_3$(1:0, 2:1, 1:1, 0:1) with pH 2.0 simulated acid rain were applied to an Inceptisols(Gyuam series) and Andisols(Pyeongdae series). The Andisols had higher $SO_4{^{2-}}$ adsorption capacity than the Inceptisols because of its higher point of zero charge(PZC, pH 6.5) than Inceptisols(PZC pH 3.1). Cation leaching in Andisols varied directly with the $NO_3$ content of the leaching input due to higher mobility of $NO_3$ compared with $SO_4$ that was absorbed. The pH of the Andisols was higher with the addition of $Na_2SO_4$ than the addition of $NaNO_3$ indicating that this soil behaves as a base and has a high $SO_4$ adsorption capacity. The relative $NO_3{^-}/SO_4{^{2-}}$ content input had no effect on cation leaching of the Inceptisols. Amounts of leaching on the Andisols by simulated acid rain were higher than Inceptisols. This experiment explained that anion composition of acid rain plays a significant role in the cation leaching of soils which are able to adsorb $SO_4$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.2
• /
• pp.169-175
• /
• 1988

A laboratory experiment was conducted to investigate the effects of pH, organic matters and anion on the adsorption and degradation of surfactant by different soils; Anmi series (limestone region), Gangseo series (alluvial soil). For this study, Alkyl Benzene Sulfonate (ABS ; Sodium Dodecylbenzenesulfonate) was used as a surfactant. The results were as follows: 1. Adsorption of ABS by soils was correlated positively with the equilibrium concentration of ABS in a soil suspension. (Anmi seris : r=0.9855, Gangseo series : r=0.9931). 2. Adsorption rate of ABS by soils was about 70% of the treated concentration ($600{\mu}g$ ABS/g soil) in a range of pH 4 to pH 5, and about 20% for pH 8. 3. Addition of electrolytes increased ABS adsorption by soils in a soil suspension; the higher concentration, the higher adsorption. But the influence among electrolytes was not significant. 4. Adsorption of ABS by soils was not affected by soil organic matter content in this experiment. 5. Degradation rate of ABS in a soil suspension was about 85% at $30^{\circ}C$, and about 10 to 15% at $10^{\circ}C$. Addition of sewage accelerated the degradation rate regardless of temperature and reached about 85% in a week.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.11
• /
• pp.1789-1791
• /
• 2008

This study was aimed (i) to develop an effective method for the purification of ginsenosides for industrial use and (ii) to compare the distribution of ginsenosides in cultured wild ginseng roots (adventitious root culture of Panax ginseng) with those of red ginseng (steamed ginseng) and white ginseng (air-dried ginseng). The crude extracts of cultured wild ginseng roots, red ginseng, and white ginseng were obtained by using a 75% ethanol extraction combined with ultrasonication. This was followed sequentially by AB-8 macroporous adsorption chromatography, Amberlite IRA 900 Cl anion-exchange chromatography, and Amberlite XAD16 adsorption chromatography for further purification. The contents of total ginsenosides were increased from 4.1%, 12.1%, and 11.3% in the crude extracts of cultured wild ginseng roots, red ginseng, and white ginseng to 79.4%, 71.7%, and 72.5% in the final products, respectively. HPLC analysis demonstrated that ginsenosides in cultured wild ginseng roots were distributed in a different ratio compared with red ginseng and white ginseng.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.3
• /
• pp.354-361
• /
• 2022

In a direct methanol fuel cell system (DMFC), one of the drawbacks is methanol crossover. Methanol from the anode passes through the membrane and enters the cathode, causing mixed potential in the cell. Only Pt-based catalysts are capable of operating as cathode for oxygen reduction reaction (ORR) in a harsh acidic condition of DMFC. However, it causes mixed potential due to high activity toward methanol oxidation reaction of Pt. To overcome this situation, developing Pt-based catalyst that has methanol tolerance is significant, by controlling reactant adsorption or reaction kinetics. Pt/C decorated with phosphate ion was prepared by modified polyol method as cathode catalyst in DMFC. Phosphate ions, bonded to the carbon of Pt/C, surround free Pt surface and block only methanol adsorption on Pt, not oxygen. It leads to the suppression of methanol oxidation in an oxygen atmosphere, resulting in high DMFC performance compared to pristine Pt/C.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.6
• /
• pp.427-436
• /
• 2023

In the industry, it is recognized that human activities significantly lead to a large amount of wastewater, mainly due to the increased use of water and energy. As a result, the growing field of wastewater resource technology is getting more attention. The common technology for hydrogen production, water electrolysis, requires purified water, leading to the need for desalination and reprocessing. However, producing hydrogen directly from wastewater could be a more cost-effective option compared to traditional methods. To achieve this, a series of first-principle computational simulations were conducted to assess how waste nutrient ions affect standard electrolysis catalysts. This study focused on understanding the adsorption mechanisms of byproducts related to the oxygen evolution reaction (OER) in anion exchange membrane (AEM) electrolysis, using Co₃O₄ as a typical non-precious metal catalyst. At the same time, efforts were made to develop a comprehensive free energy prediction model for more accurate predictions of OER results.

• Journal of the Korean Chemical Society
• /
• v.47 no.5
• /
• pp.439-446
• /
• 2003

Surface-enhanced Raman(SER) spectroscopy was utilized to investigate the adorption orientation of the 4-biphenylcarboxylic acid(BPCA) derivatives, such as 4'-cyano-BPCA(c-BPCA), 4'-mercapto-BPCA(m-BPCA), and 4'-amino-BPCA(a-BPCA), which were adsorbed on Au and Ag colloid monolayers. For the systematic approach, information regarding the adsorption behavior of benzoic acid, biphenyl, and BPCA was applied to the target molecules. From the spectral behaviors of benzene ring, C-H stretching, carboxylate anion, and the other finger printing vibrational modes, it was concluded that only the m-BPCA was adsorbed tilt with thiol group being adsorbed on Au surface, whereas the other molecules were adsorbed flat on both Au and Ag surfaces.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.49-54
• /
• 2013

We fabricated a composite carbon electrode to remove nitrate ions selectively from a mixed solution of anions. The electrode was fabricated by coating the surface of a carbon electrode with the nitrate-selective anion exchange resin (BHP55, Bonlite Co.) powder. We performed capacitive deionization (CDI) experiments on a mixed solution containing chloride, nitrate, and sulfate ions using a BHP55 cell constructed with the fabricated electrode. The removal of nitrate ions in the BHP55 cell was compared to that of a membrane capacitive deionization (MCDI) cell constructed with ion exchange membranes. The total quantity of ions adsorbed in BHP55 cell was $38.3meq/m^2$, which is 31% greater than that of MCDI cell. In addition, the number of nitrate adsorption in the BHP55 cell was $15.9meq/m^2$ (42% of total adsorption), 2.1 times greater than the adsorption in the MCDI cell. The results showed that the fabricated composite carbon electrode is very effective in the selective removal of nitrate ions from a mixed solution of anions.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.668-671
• /
• 2013

This paper describes activated carbon block filters prepared by extrusion for water purifier. The specific surface area of the activated carbon blocks affecting the properties of a polymer binder were investigated. Polyethylene (PE) particles were used as a binder polymer and the effect of particle sizes on changes in the specific surface area of activated carbon blocks in addition to the adsorption properties of chloride anion in the aqueous solution were investigated. The sizes and shapes of PE particles were measured using SEM. The specific surface area of activated carbon was $1186m^2/g$. The specific surface area of PE binder was $444m^2/g$ and $940m^2/g$ with the particle sizes of $200{\mu}m$ and $20{\mu}m$, respectively. In order to verify the performance of the filter, chlorine adsorption experiments were conducted.