• 한국임상수의학회지
• /
• 제39권1호
• /
• pp.28-31
• /
• 2022

A 5-week old Thoroughbred foal was presented with severe left carpal valgus. Radiographs of the dorsopalmar projections confirmed the deviation was 14 degrees. Surgery using a single-position screw traversing the physis of the distal radius was performed. The limb was almost straight (2 degrees) 3 weeks after surgery. Visual/radiograph follow-up 7 months after screw removal revealed no over-correction after removal of the screw. Transphyseal bridging using a single-position screw without lateral periosteal transection of distal radius was successful for the correction of foals with this condition.

• 대한치과교정학회지
• /
• 제21권1호
• /
• pp.131-170
• /
• 1991

This study was designed to analyze morphological characteristics of Korean young adults, norms and standard deviation of variables, sexual differences, correlationship between each area of face and correlationship between hard tissue and soft tissue. The primary sample consisted of 45 males and 57 females who were early and middle twenties and had acceptable profile, no history of previous orthodontic treatment, absence of remarkably large overjet and overbite, full complement of permanent teeth, Class I skeletal and dental relationships and good vertical facial proportions. Their cephalograms were analyzed morphologically with a computer morphometrics. Then the final sample - 25 males and 38 females - were selected within 1 S.D. of E-line, ANB, P/A facial height ratio, Interincisal angle, L1 to A-Pog, ODI and APDI. The results of the study were as follows: 1 In the form and proportion of facial skeleton there were no significant differences between males and females, but in the size males were larger than females. 2. The dental protrusion patterns had no significant sexual difference and no significant correlationship between protrusion of upper lip and inclination of upper incisor. But mentolabial angle had positively correlated with interincisal angle and negatively with inclination of upper and lower incisor. 3. In the relationship between nose and soft-tissue profile, males were larger than females in nasal length, height and angular measurements. 4. In analysis of soft-tissue profile, males were larger than females in the length and thickness. In the angular measurements and proportion of soft-tissue profile, there were no significant differences between males and females.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.135-141
• /
• 2005

Measurement of five DOF motion errors in a ultra precision feed table was attempted in this study. Yaw and pitch error were measured by using a laser interferometer and roll error was measured by using the reversal method. Linear motion errors in the vertical and horizontal directions were measured by using the sequential two point method. In this case, influence of angular motion errors was compensated by using the previously measured ones by the laser interferometer and the reversal method. The capacitive type sensors and an optical straight edge were used in the reversal method and the sequential two point method. Influence of thermal deformation on sensor jig was investgated and minimized by the periodic measurement according to the variation of room temperature. Deviation of gain between sensors was also compensated using the step response data. 5 DOF motion errors of a hydrostatic table driven by the linear motor werer tested using the measurement method. In the horizontal direction, measuring accuracies for the linear and angular motion were within ${\pm}0.02\;{\mu}m$ and ${\pm}0.04$ arcsec, respectively. In the vertical direction, they were within ${\pm}0.02{\mu}m$ and ${\pm}0.05$ arcsec. From these results, it was found that the introduced measurement method was very effective to measure 5 DOF motion errors of the ultra precision feed tables.

• 한국재료학회지
• /
• 제5권7호
• /
• pp.781-785
• /
• 1995

K$_{6}$P$_4$ $O_{13}$ flux로부터 30$\times$40$\times$70㎣ 크기의 inclusion이 없는 KTP 단결성을 성장시켰다 성장된 KTP 결정의 SHG 출력 특성 측정 결과 위상정합각은 $\theta$=90$^{\circ}$, $\Phi$=23.3$^{\circ}$이었고, $\Phi$방향의 angular acceptance는 약 2$^{\circ}$이었다. KTP 결정내 굴절율 변화에 따른 위상정합각 편차는 최대 0.17$^{\circ}$까지 변하였다. 또한 Nd : YAG와 brewster plate를 채용한 내부공진형의 diode pumped SHG module에 KTP 결정을 삽입하여 20mW의 녹색 laser를 얻었다.

• 한국운동역학회지
• /
• 제13권1호
• /
• pp.155-171
• /
• 2003

The purpose of this study was to analyze the kinematic variables of over head kick(OHK) in soccer with three dimensional analysis technique and show the kinematic characteristics of it. The 7 subjects were university football player who have been playing football more than 7 years. The OHK was filmed on 16mm video camera(30frame/sec.) kinematic variables were temporal, postures, and COG(center of gravity). The mean values and the standard deviation for each variables were obtained and used as basic factors for examining characteristics of OHK. The results of this analysis were as follows : Temporal variables : The total time elapsed(TE) of OHK was $0.95{\sim}1.14sec$, the 1st phase was 0.35sec., 2nd phase was 0.46sec., and 3rd phase was 0.22sec.. Posture variables : When subjects performed OHK at the impact event, the ankle and knee angle of kicking foot were more extend than supporting foot. but the hip angle of supporting foot were more extend than kirking foot. Moving distance of the center of mass of the both foot. When subject performed OHK at the impact event, the range of distance on mediolateral direction aspect into right left shoulder line, anteroposterior direction aspect was $20.9{\pm}10.5cm$, vertical direction aspect was $92.3{\pm}19.9cm$. Angular velocity : the faster angular velocity of knee ankle on the kicking foot pew form jump position to landing position, the faster velocity of ball became. C. O. G. variables. When subject performed OHK at the impact event, upper part of the body was getting lower, lower part of the body was getting higher.

• 한국음향학회지
• /
• 제37권6호
• /
• pp.437-442
• /
• 2018

본 논문에서는 환형배열을 이용하여 단일음원이 코히어런트 분산 분포를 가지는 경우 닫힌 형태로 음원의 위치를 추정하는 기법을 제안한다. 음원이 다중경로를 거쳐 센서에 도달하는 경우 분산음원으로 보이며 이때 음원의 위치는 대표 방위, 대표 고각, 대표 방위의 분포, 대표 고각의 분포 네 가지 변수로 표현될 수 있다. 이러한 경우 DSPE(Distributed Source Parameter Estimator) 기법과 같은 탐색 기법으로 네 변수를 찾기 위해서는 매우 많은 탐색과정을 필요로 한다. 본 논문에서는 빠른 위치 추정을 위해 센서간의 상관함수와 최소자승기법을 이용하여 닫힌 형식으로 대표 방위와 고각을 추정하는 기법을 제안한다. 특히 음원이 대표적인 분포 모델인 가우시안 분포를 따를 경우 방위와 고각의 표준편차 또한 닫힌 형식으로 추정한다. 시뮬레이션에서는 DSPE 기법과 비교하여 제안 기법의 타당성을 확인하였다.

• The Journal of Advanced Prosthodontics
• /
• 제15권5호
• /
• pp.259-270
• /
• 2023

PURPOSE. This study evaluated the reliability of the chair-side CAD-CAM surgical guide (CSG) in the anterior maxilla by comparing its accuracy with the laboratory 3D-printed surgical guide (3DSG) and manual surgical guide (MSG) concerning different levels of dentists' surgical experience. MATERIALS AND METHODS. Ten surgical guides of each type (MSG, 3DSG, and CSG) were fabricated on a control study model with missing right and left central incisors. Sixty implants were placed in 30 study models by two dentists (one inexperienced and one experienced) using three different types of surgical guides. Horizontal deviations at shoulder and at apex, vertical, and angular deviations were measured after superimposing the planned and placed implant positions in the software. Kruskal-Wallis and Mann-Whitney U tests were used to compare the accuracy of three types of surgical guides in each dentist group and the accuracy of each surgical guide between two dentists (α = .05). RESULTS. There were no significant differences in any deviations between CSG and 3DSG, apart from angular deviation, for both dentists' groups. Moreover, both CSG and 3DSG showed no significant differences in accuracy between the two dentists (P > .05). In contrast, MSG demonstrated significant differences from CSG and 3DSG and a significant difference in accuracy between the two dentists (P < .05). CONCLUSION. CSG provides superior accuracy to MSG in implant placement in the maxillary anterior region and is comparable to 3DSG at different levels of surgical experience, while offering the benefits of shorter manufacturing time and reduced patient visits.

• 한국의학물리학회지:의학물리
• /
• 제18권1호
• /
• pp.48-54
• /
• 2007

본 연구는 MOSFET (Metal Oxide Semiconductors Fleid Effect Transistors) 선량계의 교정과 특성분석을 위해서, 자체 팬톰을 개발하고 이 팬톰을 적용하여 표준감도와 고감도 두 종류의 MOSFET선량계의 특성을 비교 평가하는 것이다. 본 연구에서 개발한 팬톰은 직경 10cm의 반구형 모양인 팬톰과 1cm 두께 $30{\times}30cm^2$의 평판형의 팬톰으로 아크릴로 제작되었다. 평판형 팬톰은 MOSFET 선량계의 교정과 선량재현성, 선량직선성, 선량률 의존성을 측정하는데 사용하였으며 반구형 팬톰은 빔 입사각도 및 선량계 방향에 대한 MOSFET 선량계 특성을 분석하기 위해서 사용하였다. 모든 측정과정은 선형가속기(CL21EX, Varian, USA)의 6 MV 광자선, SSD 100cm, 조사면 $10{\times}10 cm^2$에서 수행하였다 선량계 교정과 선량재현성 평가에 사용된 5개의 표준감도와 고감도 MOSFET 선량계에 각각 200 cGy로 5번 반복 조사하여 $1.09{\pm}0.01{\sim}1.12{\pm}0.02,\;2.81{\pm}0.03{\sim}2.85{\pm}0.04mV/cGy$. 범위의 평균 교정계수가 결정되었고 선론쌔현성은 두 선량계 모두 2%이내로 거의 동일하였다. $5{\sim}600\;cGy$ 범위에서의 선량직선성은 두 MOSFET 선량계 모두 결정계수 $R^2=0.997$, 0.999인 좋은 선량직선성을 나타내었다. 200 cGy로 $100{\sim}600\;MU/min$ 범위의 선량률 의존성도 1%이내로 두 선량계가 동일하게 나타났다. 그러나 빔 입사각도와 선량계 방향의 의존성 평가에서, 표준감도와 고감도 MOSFET선량계는 평균적으로 빔 입사각도에 대해 13%, 10%의 변동폭과 ${\pm}4.4%$와 ${\pm}2.1%$의 표준편차가 있었으며, 선량계 방향에 대해 5%, 2%의 변동폭, ${\pm}2.1%$와 ${\pm}1.5%$의 표준편차로 두 선량계 간 현저한 차이를 나타났다 그러므로 여러 방향의 치료빔을 사용하는 방사선 치료의 선량검증을 위해서는 빔 입사각도와 선량계 방향의 의존성이 적은 고감도 MOSFET 선량계를 사용하는 것이 표준감도 WOSFET 선량계를 사용하는 것보다는 더 정확한 선량검증을 수행할 수 있을 것으로 사료된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권6호
• /
• pp.381-389
• /
• 2013

Two patients with partial edentulous maxilla were scheduled to undergo installation of implant fixtures using a tooth-supported surgical template based on computer assisted treatment planning. After 3-dimensional (3D) computed tomographic scanning was transferred to the OnDemand3D (Cybermed Co., Seoul, Korea) software program for virtual planning, fixtures of MK III Groovy RP implant of the Br${\aa}$nemark System (Nobel Biocare AB Co., G$\ddot{o}$teborg, Sweden) was installed using the In2Guide (CyberMed Co., Seoul, Korea) tooth-supported surgical template with a Quick Guide Kit (Osstem Implant Co., Seoul, Korea) system in the posterior maxilla of each patient. Sinus floor elevation with a xenogenic bone graft procedure was also performed simultaneously in one patient. Fixture installations were completed successfully without complications, such as sinus mucosa perforation, bony bleedings, fenestrations, or others. During the last two-year follow-up period after prosthetics delivery, each implant was found to be fine with no other minor complications. The entire procedures are reported and the literatures on use of tooth-supported surgical template was reviewed.

• 한국지반공학회지:지반
• /
• 제4권3호
• /
• pp.5-18
• /
• 1988

3종의 입상체시료를 대상으로 공극비의 빈도분포, 상대밀도 전단강도 등에 대한 시험연구결과 (1) 유리알의 경우 공극비의 빈도분포는 Shahinpoorl가 제안한 음의 지수분포에 접근하며 입자의 모양은 구형에서 각형의 순으로 변화되는 반면에 조밀한 공극의 빈도는 감소하며 Beta분포로서 잘 나타냈다. (2) 전 시료에서 공극비의 표준편차는 시료의 상대밀도와 입자의 구형성이 감소함에 따라 증가하였다. (3) 전단강도는 평균공극비와 표준편차의 함수일 뿐만 아니라 공극비 분포의 확율밀도함수이다. (4) 공극비는 정도분포가 조밀한 공극쪽으로 기울수록 시료의 전단강도는 더 크며 이의 역도 또한 같다.