• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.969-972
• /
• 2016

본 논문에서는 고성능 HEVC intra prediction을 위한 Angular 모드 결정 알고리즘을 제안한다. HEVC의 intra prediction은 공간적 중복성을 제거하기 위해 사용된다. Intra prediction은 총 35개의 모드를 가지며, $64{\times}64$에서 $4{\times}4$ 블록 크기까지 35개의 모드를 수행 후 최적의 cost를 갖는 블록 크기 및 모드를 결정한다. Intra prediction은 각 블록 크기마다 35개의 모드를 수행하기 때문에 높은 연산량과 연산시간을 가지고 있다. 제안하는 Angular 모드 결정 알고리즘은 원본영상의 간단한 픽셀차이를 가지고 Angular 모드 1개를 선택한다. 선택된 Angular 모드와 Planar 모드, DC 모드로 intra prediction을 수행하여 최적의 cost를 갖는 모드를 결정한다. 성능 평가 지표는 BD-PSNR과 BD-Bitrate를 사용하였으며, 제안하는 알고리즘과 HM-16.9를 비교한 결과 BD-PSNR은 평균 0.035 증가하였고, BD-Bitrate는 평균 0.623 감소했다. 또한, 인코딩 타임은 약 6.905% 감소하였다.

• 한국정보통신학회논문지
• /
• 제21권4호
• /
• pp.767-773
• /
• 2017

본 논문에서는 HEVC 부호기를 위한 효율적인 Intra Prediction Angular 모드 결정 하드웨어 설계를 제안한다. HEVC의 Intra Prediction은 현재 블록 주변의 재구성된 샘플들을 참조하여 현재 블록을 예측하는 방법이다. Intra Prediction에서는 1개의 DC 모드, 1개의 Planar 모드, 33개의 Angular 모드로 총 35개의 모드를 지원한다. HEVC의 Intra Prediction은 35개의 모드 중에서 최적의 모드를 결정한 후 예측하여 부호화 성능을 향상 시킨다. 그러나 35가지의 모드를 모두 처리하기 위해서는 많은 연산 복잡도와 처리시간이 요구된다. 그러므로 본 논문에서는 원본 영상 픽셀의 차이 값을 비교하여 Angular 모드를 효율적으로 결정하는 알고리즘을 적용한 하드웨어 설계를 제안하였다. 또한 효율적인 알고리즘의 사용을 통해 하드웨어 면적을 감소시켰다. 제안된 하드웨어 구조는 Verilog HDL로 설계하였으며, 65nm 공정으로 합성하였다. 합성 결과 14.9K개의 게이트로 구현되었고, 최대 동작 주파수는 2GHz이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.145-148
• /
• 2016

본 논문에서는 고성능 HEVC 부호기를 위한 효율적인 Intra Prediction Angular 모드 결정 하드웨어 설계를 제안한다. Intra Prediction에서는 35가지 모드 중에서 최적의 모드를 결정한 후 예측하여 부호화 성능을 향상 시킨다. 하지만 35가지의 모드를 모두 처리하기 위해서는 많은 연산 복잡도와 처리시간이 요구된다. 그러므로 본 논문에서는 원본 영상 픽셀의 차이 값을 비교하여 Angular 모드를 효율적으로 결정하는 알고리즘을 적용한 하드웨어 설계를 제안한다. 효율적인 알고리즘의 사용을 통해 하드웨어 면적을 감소시켰다. 제안된 하드웨어 구조는 Verilog HDL로 설계하였으며, 65nm 공정으로 합성하였다. 합성 결과 14.9K개의 게이트로 구현되었고 최대 동작주파수는 2GHz이다.

• 센서학회지
• /
• 제26권6호
• /
• pp.402-407
• /
• 2017

Characteristics of various material surface plasmon resonance (SPR) chips were investigated in angular interrogation mode and intensity interrogation mode. Among five metals, silver (Ag), gold (Au), copper (Cu), chromium (Cr) and titanium (Ti), three metals, Ag, Au and Cu were paid attention to since their characteristics can be easily analyzed in angular interrogation mode by investigating the change of their reflectance curves according to refractive index change from 1.331 to 1.335. Most of SPR chips with various configurations showed the similar property in angular interrogation mode. The application of the SPR chip made of Ag, Au and Cu or their combinations depends on their reflectance properties. In intensity interrogation mode, the operation range may be limited since the variation of the intensity was not linearly related to refractive index change ranging from 1.331 to 1.335. However, the SPR chip containing high ratio of Ag may be applicable to high sensitive detection due to their sharp reflectance curves in intensity interrogation mode.

• 한국소음진동공학회논문집
• /
• 제13권1호
• /
• pp.26-32
• /
• 2003

The vibrational system of this study is consisted of a rotating cantilever pipe and the flow in the pipe. The equation of motion is derived by using Lagrange equation. The influences of the rotating angular velocity and the velocities of fluid flow in the pipe have been studied on the dynamic characteristics of a rotating cantilever pipe by numerical method. The tip-amplitude of axial vibration and maximum tip-deflection of axial direction of cantilever pipe are directly proportional to the velocity of fluid and rotating angular velocity of pipe In the steady state. respectively The bending tip-amplitude of cantilever pipe is inversely proportional to the velocity of fluid in the steady state. When the rotating angular velocity is 5 rad/s, the velocity of fluid increase with increasing the natural frequency of axial vibration at second mode and third mode, but the natural frequency axial direction of first mode is decreased. The natural frequency of lateral direction is decreased due to increase of the rotating angular velocity. It identifies that the Influence of velocity of fluid give much variation lower mode of vibration in lateral direction. And the Influence of velocity of fluid give much variation higher mode of vibration in axial direction.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.156-160
• /
• 1996

A vibrating angular rate sensor with tuning fork type resonator of microstructure (940*820 .mu. m$^{2}$) was designed and will be fabricated by polysilicon surface micromaching. The angular rate sensor is driven in a lateral direction by electrostatic force of comb drive electrodes, and vertical vibrations of the sensor, thich is detected capacitively, are produced by Coriolis forces due to an external angular rate. Mechanical Q factors and a difference between the frequencies of the two resonant modes, the driving mode and detecting mode, play a great role in increasing the sensitivity of the sensor. To be a highly sensitive sensor, it was designed to have as small frequency discrepancy of the two resonant modes as possible. Finite element method was used for the modal analysis. Several design parameters were selected and their contributions to the modal frequencies were investigated. A method was presented for tuning the detecting mode frequency by DC bias on the drive electrodes.

• Current Optics and Photonics
• /
• 제3권4호
• /
• pp.298-303
• /
• 2019

We propose a photonic quasi-crystal fiber (PQF) for supporting up to 14 orbital angular momentum (OAM) modes with low and ultra-flat dispersion characteristics over the C+L bands. The designed PQF which consists of a large hollow center and quasi structural small air holes in the clad region exhibits low confinement losses and a large effective index separation (>$10^{-4}$) between the vector modes. This proposed fiber could potentially be exploited for mode division multiplexing and other OAM mode applications in fibers.

• ETRI Journal
• /
• 제39권3호
• /
• pp.336-344
• /
• 2017

In this paper, we propose a convenient microwave orbital angular momentum (OAM) mode generation and multiplexing method operating in the 18 GHz frequency band, based on a $2{\times}2$ uniform circular array and a $4{\times}4$ Butler matrix. The three OAM modes -1, 0, and +1 were generated and verified using spatial S-parameter measurements; the measured back-to-back mode isolation was greater than 17 dB in the full 17 GHz to 19 GHz range. However, the radiated OAM beam centers were slightly dislocated and varied with both frequency and the mode index, because of the non-ideal characteristics of the Butler matrix. This resulted in mode isolation degradation and transmission distance limitations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.39.2-39
• /
• 2002

This paper presents adaptive add-on control algorithms for theconventional mode of operation of MEMS z-axis gyroscopes. This scheme is realized by adding an outer loop to a conventional force-balancing scheme that includes a parameter estimation algorithm. The parameter adaptation algorithm estimates the angular rate, identifies and compensates the quadrature error, and may permit on-line automatic mode tuning. The convergence and resolution analysis show that the proposed adaptive add-on control scheme prevents the angular rate estimate from being contaminated by the quadrature error, while keeping ideal resolution performance of a conventional force-balancing scheme.

• 대한설비공학회지:설비저널
• /
• 제16권3호
• /
• pp.285-294
• /
• 1987

Parametric study on the efficiency of Rotary Solid Dehumidifer are reported. Experi-ments have been performed by varying regeneration temperature, regeneration humidity, flow rate of regeneration air, angular velocity of dehumidifer rotor and regeneration angle. To improve the energy efficiency, MODE 2,3 where coding zone is constructed and MODE 4, 5 where recirculating zone is constructed, were studied through experimental method $\ldots$. These results show that economical operating ranges exist in regeneration temperature, flow rate of regeneration air, angular velocity of dehumidifier rotor and regeneration angle. MODE 2,3 where cooling zone is constructed between regeneration Bone and process zone, is far better than MODE 1 in view of energy effiency, and optimum cooling angle and flow rate of cooling air exist. But MODE 4 and MODE 5, where recirculating zone is constructed, are similar to MODE 1.