• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.411-414
• /
• 2002

The CdTe semiconductor detector has a higher detection efficiency for x-rays and $\square$amma rays and a wider energy band gap compared with Si and Ge semiconductor detectors. Therefore, the size of the detector element can be made small, and can be operated at room temperature. The interaction between a CdTe detector and incident x-rays is mainly photoelectric absorption in the photon energy range of up to 100 keV. In this energy range, Compton effects are almost negligible. We have developed a 256 channel CdTe array detector system for monochromatic x-ray CT using synchrotron radiation. The CdTe array detector system, the element size of which is 1.98 mm (h) x 1.98 mm (w) x 0.5 mm (t), was operated in photon counting mode. In order to improve the spatial resolution, we tilted the CdTe array detector against the incident parallel monochromatic x-ray beam. The experiments were performed at the BL20B2 experimental hutch in SPring-8. The energy of incident monochromatic x-rays was set at 55 keV. Phantom measurements were performed at the detector angle of 0, 30 and 45 degrees against the incident parallel monochromatic x-rays. The linear attenuation coefficients were calculated from the reconstructed CT images. By increasing the detector angle, the spatial resolutions were improved. There was no significant difference between the linear attenuation coefficients which were corrected by the detector angle. It was found that this method was useful for improving the spatial resolution in a parallel monochromatic x-ray CT system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.2
• /
• pp.183-192
• /
• 2004

The effect of eight varieties of grain and forage type whole crop rice (Oryza sativa L Japonica) each harvested at four stages of maturity were investigated for morphology and yield, proportion of botanical fractions, fermentatability and chemical composition in an $8{\times}4$ factorial experiment. All crops were sown in 1997 at Saitama Prefecture, Japan under identical condition and harvested on 10, 22, 34 and 45 days after flowering in 1998. Total DM yield of forage type varieties was similar to that of the highest yield of grain type varieties. However, while yield of forage type varieties was attributed to higher proportion of straw than head, the reverse was in the case of grain type varieties. Yield in line with the proportion of head increased (p<0.001), but in contrast proportion of straw decreased (p<0.001) with the increase in maturity. Silage fermentability of grain type varieties was better than forage type varieties. Fermentability improved with the increase (p<0.001) in maturity suggesting that the moisture content should be reduced to improve fermentation quality. Forage type varieties contained higher (p<0.001) ash, crude fat (EE), organic cell wall (OCW) and acid detergent fiber (ADF), but contained lower crude protein (CP), organic cell content (OCC), CP in OCC and nitrogen-free cell wall extract (NCWFE) than the grain type varieties. The ash, CP, EE, Oa (60% digestible OCW), Ob (40% digestible OCW), OCW, ADF and acid detergent lignin (ADL) decreased (p<0.001), but OCC and NCWFE increased (p<0.001) with the increase in maturity. It is concluded that stage of maturity not only increases yield and proportion of head, but also improved the fermentation quality and increases quality chemical composition (except CP) of whole crop rice. Forage type varieties may be as good as grain type varieties in terms of yield, but fermentation quality and chemical composition may not be as good as that of grain type varieties.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.3
• /
• pp.33-40
• /
• 2010

Multizeros(multiple order zeros) optical beams which belong to the Laguerre-Gaussian beams, have rotational phase and conically-shaped amplitude structures around multizeros points in their phase and amplitude profiles, respectively. Especially, they have their own characteristics that the multizero points do not vanish over free-space propagation. Therefore, they are expected to be adequate for the applications of long-range optical measurement by using their multizero points as optical markers for the deformation sensing. In this paper, fundamental properties of multizeros optical beams for long-range optical measurement applications are investigated and clarified. In particular, the mathematical investigations are described on the characteristics of multizeoros optical beams such as (1) separation of a multizero into isolated single order zeros, (2) topological charge of zeros distribution which are induced by superposing them. And also the outline of a fundamental experiment and its result are explained briefly.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.6
• /
• pp.806-810
• /
• 2006

Candida utilis can assimilate fatty acids, so it was hypothesized that the treatment of rice by Candida utilis would improve feed quality by reducing fat content and adding the yeast function that would stimulate rumen microbes. In this study, the oil assimilation ability of Candida utilis IFO1086, 0988, 0626 and the effect of treatment of Candida utilis IFO1086, IFO0626 on the nutrient contents of rice bran were examined. The effect of Candida utilis addition on the in vitro degradability of forage was also investigated. It was found that the oil assimilating ability of IFO1086 and IFO0626 was significantly (p<0.01) higher than that of IFO0988. Candida utilis treatment reduced the EE content and increased the CP, ADF and NDF percentage. The absolute amount of ether extract was decreased by 35.9% in IFO1086 and IFO0626 treatment. The absolute amount of crude protein was not changed by yeast treatment. The ADF and NDF amounts were increased. The addition of Candida utilis increased in vitro forage degradability significantly (p<0.05). Based on these results it can be postulated that treatment of rice bran by Candida utilis may improve feed quality by reducing fat content, increasing the CP content and adding the function of yeast for stimulating rumen microbes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.3
• /
• pp.385-392
• /
• 2016

Seasonal variability in the algal community structure of intertidal zones was examined at six study sites in Marine National Parks, on the western and southern coasts of Korea from March to November 2015. A total of 193 species of algae, comprising 27 green, 40 brown and 126 red algae, were identified. Algal biomass averaged 101.50 g dry wt./m² with a maximal at Tonggae (168.12 g dry wt./m²) and minimum at Haseom (54.49 g dry wt./m²). The dominant seaweeds by biomass were Sargassum thunbergii at five sites (Tonggae, Haseom, Namdongri, Ando amd Sinjeonri), and S. fusiforme at Soando. Community indices measured as follows: dominance index (DI), 0.31–0.69; richness index (R), 7.30–11.43; evenness index (J'), 0.33–0.49; and diversity index (H'), 1.15–1.86. As evaluated using community indices and environmental states, the EEI (Ecological Evaluation Index) of the Marine National Park was “normal”. The present results indicate that seaweed community structures and indices could be used to evaluate the environmental status of coastal ecosystems.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.3
• /
• pp.386-389
• /
• 2006

Silage is a major component of cattle rations, so the improvement of silage quality by the inoculation of lactic acid bacteria is of great interest. In this study, commercially distributed Lactobacillus plantram and Lactobacillus rhamnousas NGRI 0110 were used for ensilaging of guinea grass. The four treatments used were a control silage, a silage with cellulase addition, a silage with cellulose+L. plantram addition, and a silage with cellulose + NGRI 0110 addition. Silage quality, voluntary intake, nutrient digestibility, and the characteristics of ruminal fluid of wethers were investigated. Silage to which lactic acid bacteria were added showed low pH and acetic acid concentration and the highest lactic acid content. Dry matter and organic matter digestibility were significantly (p<0.05) increased by cellulase addition and significantly (p<0.05) higher values were observed in L. plantram- and NGRI 0110-added silage. Voluntary intake of NGRI 0110-added silage was the highest and that of control silage was the lowest. We concluded that the observed ability of NGRI 0110 to tolerate low pH and to continue lactic acid fermentation in high lactic acid concentration had also occurred in actual ensilaging. The results indicate that the addition of lactic acid bacteria might improve silage quality and increase digestibility and voluntary intake. The potential for improvement by NGRI 0110 was higher than that to be gained by the use of commercially available lactic acid bacteria.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.2
• /
• pp.5-14
• /
• 1987

In order to examine the different effects of noise and music on mental tasks, an addition of figures as a left-hemispheric task and a pattern search as a right-hemispheric task were given to elementary school pupils under conditions of jet noise stimulus, music stimulus, and no-sound stimulus, respectively. Results showed that effects of music and noise stimuli during these tasks were significantly different. The subjects under music stimulus tended, when performing additions, to show occasional short periods in which they produced substantially less than their own average rate of work. This is due to interaction between calculation and hearing music in the left hemisphere, whereas there was no detrimental effects on the task of addition under noise stimulus as well as no-sound stimulus because the addition and the noise may be separately processed in different cerebral hemispheres. As effects of noise on performing search task, the subjects tended to show instantaneous agitations in their working curves. Since noise with no-meaning is processed in the right hemisphere, it may be explained as an interacting effect in this hemisphere.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.793-799
• /
• 2002

Four feeds, three concentrates (rice bran, soybean meal and flaked corn) and one forage (corn silage) were incubated in four ruminally fistulated Holstein steers over three one week periods in a 3${\times}$4 incomplete latin square design where steers served as blocks and feeds as treatment. The objectives of the study were to investigate in situ DM, N and P degradability characteristics of feeds in order to assess availability of these nutrients by ruminants. In each period, all feeds were incubated in quadruplets (corn silage in triplicates) in the rumen of each steer in a reverse order for 3, 6, 9, 12, 18, 24 and 48 h. The DM 'a' fraction was higher and lower (p<0.001) in corn silage and rice bran respectively. Although corn silage contained the lowest (p<0.01) DM 'b' fraction, flaked corn contained the highest. Rate of DM degradation of flaked corn and corn silage were half (p<0.05) of the rate of DM degradation of either rice bran or soybean meal. Potential or effective DM degradability (p<0.05 to 0.001) at various passage rates were the lowest for rice bran and the highest for soybean meal. Corn silage N 'a' and 'b' was the highest and lowest, respectively (p<0.01). N 'c' of corn silage and rice bran was higher (p<0.001) than other feeds. Potential N degradability was the lowest in flaked corn (p<0.05). P 'a' was high (p<0.01) for corn silage and rice bran. P 'b' fraction was very high (p<0.001) in soybean meal but was absent in corn silage. Availability of DM (p<0.01 or 0.001), N (p<0.001) and P (p<0.05) differed between feeds at various passage rates except P availability at k=0.02 per h (p>0.05). The results demonstrate that the availability of DM, N and P by ruminants depends on feed as well as categories of animal.

• Journal of Plant Biology
• /
• v.3 no.1
• /
• pp.26-31
• /
• 1960

1. Mt. Soyo is situated in the central part of Korea, approximately 37$^{\circ}$56'W. Latitude, 127$^{\circ}$4'N. Longitude. This mountain is about 530 meters above sea level, and consists mainly of granites. Above 200 meters the area is covered with oak trees (Quercus mongolica, Q. aliena) with a kind of Rhododendron (Rhododendron mucronulatum, R. schlippenbachii) as undergrowth. About 500 packets of bryophytes were collected by the writer in 1959. 2. The mosses collected in this region were of 68 species belonging to 51 genera. Those species may roughly be divided, as follows; 1) 15 species (22.1%) are distributed also in Europe and North America (Holarctic element). 2) 2 species (2.9%) occur also in Kamchatka and the Aleutians (North Pacific element). 3) 14 species (20.6%) are widely distributed every where (Cosmopolitan element). 4) 19 species (27.9%) occur also in the temperature region of the Far East (East Asiatic element). 5) 3 species (4.4%) occur also in Indomalaya and India (Tropical element). 6) 15 species (22.1%) are endemic to Japan and Korea. 3. The Hepaticae collected in this region are of 11 species belonging to 7 genera. Those may roughly be divided, as follows; 1) 4 species (36.4%) are distributed also in Europe and North America (Holarctc element). 2) 5 species (45.5%) occur also in the temperature region of the Far East (Asiatic element). 3) 1 species (9.1%) occur also in Indomlaya. 4) 1 species (9.1%) are endemic in Japan and Korea. 4. The species which are new to the flora of Korea are as follows; 1) Leucobryum glaucum (L.) Schimp. 2) Psedoleskeopsis dicurvata (Mitt.) Broth. 3) Thuidium delicatulum (Hedw.) Mitt. 4) Dolichotheca perrobustum (Broth.) Broth. 5) Brachiolejeunia sandvicensis (Gott). Evans. 6) Porella vernicosa Lindb. ssp. gracillina (Mitt.) Ando.

• Journal of Conservation Science
• /
• v.33 no.1
• /
• pp.11-16
• /
• 2017

This study reviews the structure of wooden printing blocks in Japan, focusing on the blocks as three-dimensional objects. Inspection is more effective three-dimensionally than two-dimensionally, and for the first time in wooden printing block research, the study uses a 3D CT scanner and a high-resolution 3D digitizer. The 3D CT scanner examines cross sections of the blocks and identifies their grain and contents, including insects surviving within them. The 3D digitizer enables observation of objects up to 0.02 mm; this allows detailed collection of block surface information, which is difficult to identify with a conventional microscope.