• Mass Spectrometry Letters
• /
• v.8 no.4
• /
• pp.69-78
• /
• 2017

Glycosylation, which is one of the most common post-translation modification (PTMs) of proteins, plays a variety of crucial roles in many cellular events and biotherapeutics. Recent advances have led to the development of various analytical methods employing a mass spectrometry for glycomic and glycoproteomic study. However, site-specific glycosylation analysis is still a relatively new area with high potential for technologies and method development. This review will cover current MS-based workflows and technologies for site-specific mapping of glycosylation ranging from glycopeptide preparation to MS analysis. Bioinformatic tools for comprehensive analysis of glycoprotein with high-throughput manner will be also included.

• Journal of KSNVE
• /
• v.2 no.1
• /
• pp.49-59
• /
• 1992

The motion analysis of a translation device driven by a piezoelectric actuator is performed to identify the mechanics of impact drive mechanism and to find the maximum speed waveform. The translation device is modeled as a semidefinite two-degree-of-freedom system. The motion analysis includes effects of friction force between moving mass and contact surface, dynamics of voltage amplifier and piezoelectric elements, and hysteresis of piezoelectric actuator. Base on the model, simulation studies are carried out and then compared with experimental results. It is found that the error between moving distances obtained by analysis and experiment is less than 15% and that the actual motion of moving mass is well predicted by the analytical work, finally, precision positioning experiments are carried out by using a proximity sensor as a feedback sensor. Position control of moving mass is initiated by the maximum speed waveform and finely tuned by the scaled down waveform so that accurate positioning is accomplished within the resolution of the sensor.

• Kyungpook Mathematical Journal
• /
• v.53 no.3
• /
• pp.349-369
• /
• 2013

The present paper envisages the $q$-analogue of the exponential operators, determined by G. Dattoli and his collaborators for translation and diffusive operators which were utilized to establish analytical solutions of difference and integral equations. The generalization of their technique is expected to cover wide range of such utilization.

• Analytical Science and Technology
• /
• v.19 no.5
• /
• pp.407-414
• /
• 2006

An X-ray diffractometer for spatially resolved X-ray diffraction measurements was developed to identify phase in the narrow (micron-scaled) region of high burn-up fuels and some nuclear materials. The micro-XRD was composed of an X-ray microbeam alignment system and a sample micro translation system instead of a normal slit and a fixed sample stage in a commercial XRD. The X-ray microbeam alignment system was fabricated with a microbeam concentrator having two Ni deposited mirrors, a vertical positioner, and a tilt table for the generation of a concentrated microbeam. The sample micro translation system was made with a sample holder and a horizontal translator, allowing movement of a specimen at $5{\mu}m$ steps. The angular intensity profile of the microbeam generated through a concentrator was symmetric and not distorted. The size of the microbeam was $4,000{\times}20{\mu}m$ and the spatial resolution of the beam was $47{\mu}m$ at the sample position. When the diffraction peaks were measured for a $UO_2$ pellet specimen by this system, the reproducibility ($2{\Theta}={\pm}0.01^{\circ}$) of the peaks was as good as a conventional X-ray diffractometer. For the cross section of oxidized titanium metal, not only $TiO_2$ in an outer layer but also TiO near an oxide-metal interface was observed.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.1
• /
• pp.28-35
• /
• 2018

An analytical method for predicting the velocity potential around a pulsating bubble close to a free or rigid wall was established using an image method. Because the velocity potential should satisfy two boundary conditions at the bubble surface and rigid wall, we investigated the velocity in the normal direction at the two boundaries by adding the image bubbles. The potential was analyzed by decomposing the bubble motion as two independent motions, pulsation and translation, and we found that when the number of image bubbles was greater than ten, the two boundary conditions were satisfied for the translation term. By adding many image bubbles after the approximation of the pulsation term, we also confirmed that the boundary condition at the wall was satisfied.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.2
• /
• pp.519-526
• /
• 1995

Experiments have been performed to test the analytical tools developed concurrently for the motion-related unsteady pressure in annular passages. The outer cylindrical body was oscillated by a shaker in either rocking motion about a hinge-point or lateral translation motion. In the equilibrium configuration the two bodies are either concentric or eccentric, in the plane of oscillation or normal to it. The unsteady pressure generated by the oscillatory motion with low amplitudes (displacement/radius) was measured on wall of the fixed inner cylinder at various axial and azimuthal locations. The unsteady pressure were compared with theoretical predictions, and agreement was found to be within 10%. Experiments have been shown that the effect of flow velocity on the unsteady pressure is minimal and the pressure increases more or less with oscillatory motion, for low flow velocities (Re = 2 900).

• Journal of Science and Technology Studies
• /
• v.13 no.2
• /
• pp.137-172
• /
• 2013

Globally, awareness about obesity is increasing rapidly. In Korea, obesity is recognized as a disease and steps are being taken to treat it. From the health governance point of view, such standardized measures amplify the risk of obesity and thus play an important part in the prevention of the disease. In this context, various obesity treatments act as a medium for the problem-solving process. In recent years, obesity surgery has been viewed as a rational solution to the problem of obesity. In the context of standardization of treatment, Callon's "Process of Translation" in STS theories highlights the importance of the central actor (Obligatory Passage Point; OPP). However, in the case of obesity, it is difficult to identify a single OPP to project different perspectives of an actor's needs. "Lapband surgery" often acts as a "boundary object" in this context. This article assesses this absence of central actors in the process of problem solving through a case study of adoption of Lapband surgery in Korea. Further, we attempt to suggest an analytical framework with a boundary object and multiple translation concepts to aid solving the problem of obesity.

• Steel and Composite Structures
• /
• v.3 no.6
• /
• pp.439-450
• /
• 2003

The finite strip transition matrix technique, a semi analytical method, is employed to obtain the buckling loads and the natural frequencies of symmetric cross-ply laminated composite plates with edges elastically restrained against both translation and rotation. To illustrate the accuracy and the validation of the method several example of cross play laminated composite plates were analyzed. The buckling loads and the frequency parameters are presented and compared with available results in the literature. The convergence study and the excellent agreement with known results show the reliability of the purposed technique.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.135-137
• /
• 2005

The body of the work covers FSW welding of Al6061 and its thermal distribution based on an analytical model for the heat input at the probe/matrix boundary of Al plates and FSW tool due to the effect of combined translation and rotational motion of the tool pin and shoulder. Finally the 2D- finite element heat transfer analysis program has been used to plot the heat distribution at the Friction Stir Welded joint in Al 6061 plate. The work concludes that the heat distribution result obtained from FE analysis has a reasonable agreement with the experimentally measured values.

• Cross-Cultural Studies
• /
• v.22
• /
• pp.223-277
• /
• 2011

Tan Yuanjie(譚元杰) of CHINA COSTUME ART OF PEKING OPERA("中國京劇服裝圖譜") is 'Foreword' attention from the bar 'Formalism'. A note is makeup system from ever performances here, 'what kind of adaptation must be a corresponding type of costume should be worn.' This stance to 'type of person's identity and faced the scene correlated' with the actual performance tradition plays out is going and, while here the rules to capture the opera's on the character of 'identity and the circumstances under clothing' is defined. This position discussed previously 'Formalism' in line with the will he perform, and looks to meet the elements of production. This basic stance is clean up, while 'Old Beijing Opera costumes costumes taxonomy largely' literary costume' and 'militant outfit' into two groups divided over throughout steamroll surgery, because surely need to have a more systematic classification. The classification system was established as 'Part 1. Mang, Part 2. Pi, Part 3. Xi, Part 4. Kao, Part 5. YI'. In addition to these classification systems, as well as the aforementioned 'object theory' Given the symbolic significance of the capacity to keep in mind is necessary. Costumes conduct, character, situation, atmosphere and so the transport of charged symbols here, a target symbol of the system is the projection of water. This costume is detrimental to the mall for the positionsay, but I kept in mind damwongeolyi internationalization of Chinese culture. when you see the view from the perspective of semiotic systems for the sign, that the theater is necessary to complement. In this paper, 'Yi(衣)' costume on the corresponding point of the target compared to the China Culture Department of Theatre and Folklore methodology ran off and sprinting was to lay the groundwork for research.