• 한국대기환경학회지
• /
• 제16권5호
• /
• pp.539-544
• /
• 2000

A simple analytic model is proposed here to analyze the concentration deficit field caused by a large area of vegetated area. With non-dimensional deposition velocity chosen as small parameter, the regular perturbation method is exploited to derive the mass balance equation and the dynamic equations for the concentration deficit field, Analytic solutions to those equations are obtained in a closed form for several cases of interest, assuming that the concentration field is stationary and the plume can be nicely approximated as Gaussian for a point source. The results suggest that quite a negligible fraction (less than 1%) of the gaseous air pollutants emitted into the air is removed by the vegetated area of which width is 4 km in wind-wise direction, the typical dimension of the Restricted Development Zones around the metropolitan regions in South Korea.

• Journal of Multimedia Information System
• /
• 제6권4호
• /
• pp.283-292
• /
• 2019

This paper introduces the development and current prosperity of the branch discipline of visual anthropology and describes the status and current situation of modern visual anthropology and analyzes the rationality that the achievements of visual anthropology is viewed as texts and enjoy the same achievements, making it more basis and scientific in the selection of visual anthropology in subsequent research. This article comprehensively uses Delphi method and analytic hierarchy process to construct an evaluation system of visual anthropology, as well as put forward the basic principles of screening films using this evaluation system in subsequent studies and a simple outlook for future expansion.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.176-183
• /
• 2000

The performance of gas turbines decreases as their operating hours increase. Compressor fouling is the main reason for this time-dependent performance degradation. Airborne particles adhere to the blade surface and results in the change in the blade shape. It is difficult to exactly analyze the mechanism of the compressor fouling because the growing process of the fouling is very slow and the dimension of the fouled depth is very small compared with blade dimensions. In this study, an analytic method to predict the motion of particles and their deposition inside axial flow compressors is proposed. The analytic model takes into account the blade shape and the flow within the blade passage. Comparison of simulation result with field data shows the feasibility of the model. Influence of the particle distribution on the compressor fouling is also examined.

• 한국안전학회지
• /
• 제19권3호
• /
• pp.108-117
• /
• 2004

Dynamic analysis method is Presented for analyzing rectangular liquid storage structures excited by horizontal and vertical ground motions. The irrotational motion of invicid and incompressible ideal fluid in rigid rectangular liquid storage structures subjected to horizontal and vertical ground motions and the motion of fluid induced by structural deformation are expressed by analytic solutions. Analysis methods are obtained by applying analytic solutions of the fluid motion to finite element equation of the structural motion. The fluid-structure interaction effect is reflected into the coupled equation as added fluid mass matrix. The free surface sloshing motion, hydrodynamic pressure acting on the wall and structural behavior due to horizontal and vertical ground motions are obtained by the presented method.

• 한국시뮬레이션학회논문지
• /
• 제14권3호
• /
• pp.43-54
• /
• 2005

For the effective design of automated distribution center composed of Automated Storage/Retrieval System, Automated Guided Vehicle System, and Conveyor System, we proposed an analysis method to determining. design and control parameters with multiple performance objectives using Compromise Programming, which can resolve the dilemma of conflicting objectives. The Evolution Strategy generates the optimal solutions for each objectives. The Analytic Hierarchy Process selects the best solution among the alternatives generated from Evolution Strategy. The Regression Analysis formulates the objective functions for each objectives. By reducing deviations between goal values and target values generated from Analytic Hierarchy Process, Compromise Programming determines design and control parameters by compromising the multiple objectives formulated using Regression Analysis. When the parameters of system are changed, this proposed analysis method has a benefit of reducing costs and time without repeating whole simulation run.

• 한국철도학회논문집
• /
• 제14권6호
• /
• pp.569-574
• /
• 2011

정된 예산으로 철도선로시설을 개선하고자 할 때 사용할 수 있는 효과적인 예산배분 방법 중 하나는 가장 노후도가 심각한 선로구간부터 우선적으로 예산을 투입하는 것이다. 본 논문에서는 예산배분에 사용할 수 있는 선로구간 노후도 평가방법을 제시한다. 선로구간의 노후도는 궤도, 분기기, 노반, 교량, 터널 등 요소 시설물의 노후도로 결정되며 궤도의 선형 또한 선로구간 노후도에 영향을 준다. 본 논문에서 제시하는 노후도 평가 방법은 각 요소의 노후도 점수에 AHP로 구한 요소 가중치를 반영하여 선로구간 노후도 점수를 구하는 것이다.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제22권4호
• /
• pp.459-469
• /
• 2008

본 논문에서 행렬의 가장 큰 고유값과 그에 대응하는 고유벡터가 과학적인 의사결정과정에 어떻게 적용되는지를 살펴본다. 이를 적용한 계층분석적 의사결정(AHP) 방법에서 사용된 행렬이론을 통해서 실제로 연구과제 선정방법의 심사지표 가중치가 AHP를 이용하여 조절되는 예를 구체적으로 알아본다.

• Nuclear Engineering and Technology
• /
• 제52권9호
• /
• pp.2100-2106
• /
• 2020

This paper newly proposes an efficient analytic springback prediction method to predict the final dimensions of bent cylindrical tubes for a helical tube steam generator in a small modular reactor. Three-dimensional bending procedure is treated as a two-dimensional in-plane bending procedure by integrating the Euler beam theory. To enhance the accuracy of the springback prediction, mathematical representations of flow stress and elastic modulus for unloading are systematically integrated into the analytic prediction model. This technique not only precisely predicts the final dimensions of the bent helical tube after a springback, but also effectively predicts the various target radii. Numerical validations were performed for five different radii of helical tube bending by comparing the final radius after a springback.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.2040-2047
• /
• 2001

In this paper, a singularity problem of the state transition matrix is investigated in the spatial propagation when the spatial matrix differential equation is constructed via time finite element analysis. A parametric study shows that the degree of singularity of the state transition matrix depends on the degree of flexibility of the structures. As an alternative to avoid the numerical problems due to the singularity, an analytic solution fur spatial propagation of the flexible structures is proposed. In the proposed method, the spatial properties of the structure are analytically expressed by a combination of transcendental functions. The analytic solution serves fast and accurate results by eliminating the possibility of the error accumulation caused by the boundary condition. Several numerical examples are shown to validate the effectiveness of the proposed methods.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권1호
• /
• pp.87-93
• /
• 2001

A reliable analytic model that determines the exit cross sectional shape a workpiece(material) in round-oval (oroval-round) pass sequence has been developed. The exit cross sectional shape of an outgoing workpiece is predicted by using the linear interpolation of the radius of curvature of an incoming workpiece and that of roll groovw to the roll axis direction. The requirements placed on the choice of the weighting function were to ensure boundary conditions specified. The validity of the analytic model has been examined by not rod rolling experiment with the roll gap and specimen size changed. The exit cross sectional shape and area of the workpiece predicted by the proposed analytic model were good agreement with those obtained experimentally. We found that the analytic model has not only simplicity and accuracy for practical usage but also save a large amount of computational time compared with finite element method.