• Journal of vocational education research
• /
• v.37 no.5
• /
• pp.25-53
• /
• 2018

The purpose of this study is to find out the improvement plan through the satisfaction survey of the trainees involved in vocational training fraud preventive education. In order to do this, we conducted a satisfaction survey(4,263 persons) of 5,939 people who participated in the prevention education conducted by group education or e-learning in 2017. Finally we collected 4,237 effective responses data. Descriptive statistics and the regression analysis were conducted. The finding of the study were as follows. First, the education service quality(4.42), satisfaction level(4.44), understanding level(4.44) and help level(4.45) were significantly higher than those of participants in the preventive education 4 and above. Second, e-learning participants' perceived level of education service quality, satisfaction, comprehension, and help was higher in all variables than collective education's. Third, all of the sub-factors of preventive education service quality influenced satisfaction, understanding, and help in collective education and e-learning, respectively. In the collective education, the contents of education had the greatest influence, and in e-learning, the data composition had the greatest influence. Fourth, desirable education contents were cases of fraud training(70.7%), disposition regulations(47.9%), NCS course operation instructions(32.8%) and training management best practices(32.4%). Additional requirements also included the establishment of an in-depth course, the provision of anti-fraud education content for trainees, and screen switching and system stability that can be focused on e-learning. Therefore, this study suggests that first, it is necessary to activate e-learning for prevention education more, reflecting satisfaction of e-learning is higher than that of collective education. Second, it is necessary to diversify the content of preventive education and to provide it more abundantly, because it has the biggest influence in common with the satisfaction, understanding and help level of the preventive education. Third, education content next, the factors that have a relatively big influence on satisfaction are shown as delivery method and education place in the collective education. Therefore, it is necessary to prepare education place considering the assignment of instructor and convenience. Fourth, constructing data next, the factor that have a relatively great influence on understanding and help are found to be operator support, and more active operator support activities are required in e-learning. Fifth, it is required to delivery prevention activity for trainees participating in vocational training. Sixth, it is necessary to analyze the educational need to construct the contents of preventive education more systematically.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.3
• /
• pp.4-29
• /
• 2015

To protect cultural heritages from damage and destruction, evaluating the crime prevention environments is considered extremely important. This study analyzed the crime patterns related to cultural heritages, classified the crime environments by their types, and deduced the elements of the CPTED(Crime Prevention Through Environment Design), aiming to present the indices for evaluating the crime prevention environments. The results of this study can be summarized as follows. First, the crimes related to cultural heritages that must be prevented were identified as the night time trespassing and arson. According to the results of the analysis of external environments based on crime actions, the crime prevention environments of cultural heritages were classified into 10 types. Second, the important evaluation principles of the cultural heritage CPTED were the access control, surveillance reinforcement and the surrounding environment. Third, the access control that cover the internal region, boundary, external region and surroundings were classified into 22 indices. The surveillance reinforcement covers natural, organized and mechanical surveillance with 21 indices. Fourth, the applicability of the CPTED evaluation index was presented according to the types of the cultural crime prevention environments. The results confirmed that the maximum 43 indices were applicable to the seowon(lecture hall), hyanggyo(Confucian school), and gwana(district government office), and the minimum 10 indices, to the ramparts. Finally, the 43 indices were applied to Donam Seowon to validate their applicability. The results confirmed that most of the indices were applicable with the partial supplements. The evaluation index presented in this study is likely to contribute to studies in the cultural heritage CPTED field and to the protection of cultural heritages. Furthermore, this study is considered significant because it unleashed continuous concerns on and developments of CPTED. However, as the field survey to validate the applicability of the indices was limited to only one type, it may require further objective verification such as through an expert's examination of the validity and applicability of the evaluation index. In addition, to accommodate the index in related policies and systems, more precise verifications of the indices by type are considered necessary.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.1
• /
• pp.128-159
• /
• 2010

In this study, the progress of domestic cultural properties designation, the changes and problems in classification were examined, and the relationship among Traditional Pal-kyung, Dongcheon-gukok, and Modern Pal-kyung were investigated targeting total of 68 cases of state-designated cultural properties of scenic sites in order to show that the traditional significance and value are being inherited today. The major results of this study are as follows. First, increase in scenic site designations with historical, cultural, and scenic characteristics can be viewed as an active intent to embrace the concepts such as cultural utilities, historical characteristics, literary value, and ideological backgrounds, which were specified as the basis for designation in the early Cultural Property Protection Law. Accordingly, it is very encouraging that the concept of cultural attractions such as traditional gardens and observatory points are regarded as an important standard for designation of scenic sites. Second, as for the classification of scenic sites per type, it was found that 'places with excellent natural scenery' were 44.16%(30 cases), followed by 'famous buildings or gardens and places with important legend' occupying 30.9%(21 cases), 'places with famous scenery' occupying 13.2%(9 cases), 'places with outstanding historical cultural and scenic value' that occupying 10.3%(7 cases), and 'animal and vegetation habitat with beautiful scenery' (1 case). Third, according to the current classification standards for scenic sites, there were only 7 cases which could be classified into Pal-kyungs(Famous 8 Sceneries) and 3 cases classified into Dongcheon(beautiful scenery surrounded by mountains and rivers), but there was no Gugok(beautiful valleys). Consequently, in terms of external appearance, the scenic sites among the total scenic sites that could be classified into Palkyung and Gugok were only 14.7%(10 cases). Fourth, the traditional scenic sites based on literal references and Internet analysis occupied 67.7%(46 cases), which were found to be scenic sites related to the traditional Pal-kyung among which 38 cases(55.9% of 46 cases) were included based on the scenery and 8 cases(11.8% of 46 cases) were included due to the scenery at the time. Fifth, there were 8(11.8%) scenic sites which were related to Dongcheon, and 4 cases(5.9%) related to Gugok. Also, it was found that total of 40(48.9%) scenic sites designated as modern scenic sites were playing the role of local scenic sites, and they were used as the tourism advertising contents. Sixth, it was identified that there were 62 cases(91.2%) of scenic sites in total related to traditional and modern Pal-kyung or Dongcheon-gugok, and unlike explicit classifications, most of the designated scenic sites were found to be deeply connected with the historical and cultural significance contained in the scenaries.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.168-184
• /
• 2022

This paper examined the construction techniques of the earthen fortifications in the Hanseong Period of Baekje Kingdom, which has been researched most frequently among the Three Kingdoms. The construction processes of the Earthen Fortifications were reviewed and dividing into 'selection of location and construction of the base', 'construction of the wall', and 'finish, extension and repair'. The results show that various techniques were mobilized for building these earthen fortifications. Techniques which were adequate for the topography were utilized for reinforcing the base, and several other techniques were used for constructing the wall. In particular, techniques for wall construction may be clearly divided into those of the fill(盛土) and panchuk(版築) techniques. The fill method has been assumed since the 2000s to have been more efficient than the panchuk technique. This method never uses the structure of the panchuk technique and is characterized by a complex soil layer line, an alternate fill, use of 'earth mound(土堤)'/'clay clod(土塊)', and junctions of oval fill units. The fill method allows us to understand active technological sharing and application among the embankment structures in the period of the Three Kingdoms. The panchuk technique is used to construct a wall using a stamped earthen structure. This technique is divided into types B1 and B2 according to the height, scale, and extension method of the structure. Type B1 precedes B2, which was introduced in the late Hanseong Period. Staring with the Pungnap Earthen Fortification in Seoul, the panchuk technique seems to have spread throughout South Korea. The techniques of the fill and panchuk techniques coexisted at the time when they appeared, but panchuk earthen fortifications gradually dominated. Both techniques have completely different methods for the soil layers, and they have opposite orders of construction. Accordingly, it is assumed that both have different technical systems. The construction techniques of the earthen fortifications began from the Hanseong Period of Baekje Kingdom and were handed down and developed until the Woongjin-Sabi Periods. In the process, it seems that there existed active interactions with other nations. Recently, since studies of the earthen fortifications have been increasing mainly in the southern areas, it is expected that comparative analysis with neighboring countries will be done intensively.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.23 no.2
• /
• pp.43-50
• /
• 2021

Growth tests on the Yuldo, Supum1 and Supum2 cultivars of Pyropia dentata were performed at the Eoran and Imha aquafarm, Haenam in Jeollanamdo, from October to December in 2017. The mean water temperature ranged from 5.4 to 26.4 ℃. In Eoran aquafarm (flating raft method), dissolved total nitrogen (DTN), dissolved total phosphorus (DTP), total nitrogen (TN), total phosphorus (TP) and chemical oxygen demand (COD) ranged from 0.091 to 0.181 mg/L, 0.007 to 0.019 mg/L, 0.114 to 0.187 mg/L, 0.008 to 0.033 mg/L and 0.200 to1.000 mg/L, respectively. In Imha aquafarm (fixed pold method), DTN, DTP, TN, TP and COD ranged from 0.118 to 0.276 mg/L, 0.005 to 0.024 mg/L, 0.155 to 0.305 mg/L, 0.009 to 0.042 mg/L and 0.300 to1.400 mg/L, respectively. In order to investigate the number of conchospores attached on the Pyropia net, which was cut into about 4cm long. The mean number of conchospores of Yuldo, Supum1 and Supum2 cultivars were 39.5, 26.5, 72.5, respectively. Young thalli were harvested two times at Eoran aquafarm, and three times at Imha aquafarm. In eoran aquafarm, the mean thallus length of Yuldo, Supum1 and Supum2 cultivars were 49.9, 46.0, 42.0 cm on October and 163, 126.0, 263.0 cm on November, respectively. The mean thallus width of Yuldo, Supum1 and Supum2 cultivars were 5.8, 4.6, 11.5 cm on October and 20.9, 11.5, 14.0 cm on November, respectively. In Imha aquafarm, the mean thallus length of Yuldo, Supum1 and Supum2 cultivars were 119.0, 60.9, 71.0 cm on October, 196.0, 132.0, 262.0 cm on November and 187.0, 281.0, 296.0 cm on December, respectively. The mean thallus width of Yuldo, Supum1 and Supum2 cultivars were 4.2, 3.4, 3.1 cm on October, 8.9, 6.2, 6.6 cm on November and 11.7, 11.6, 9.4 cm on December, respectively. In eoran aquafarm, contents of moisture, crude ash, crude lipid, crude protein and carbohydrate of three cultivars ranged from 11.64 to 20.15, 19.54 to 21.19, 0.00 to 0.18, 29.78 to 37.81, 29.16 to 29.71, respectively. In Imha aquafarm, contents of moisture, crude ash, crude lipid, crude protein and carbohydrate of three cultivars ranged from 8.43 to 9.15, 11.42 to 17.49, 0.00 to 0.00, 31.90 to 37.54, 36.30 to 42.24, respectively.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.49-62
• /
• 2022

The hollow modular concrete block reinforced foundation method is one of the ground reinforcement foundation methods that uses hexagonal honeycomb-shaped concrete blocks with mixed crushed rock to reinforce soft grounds. It then forms an artificial layered ground that increases bearing capacity and reduces settlement. The hollow modular honeycomb-shaped concrete block is a geometrically economical, stable structure that distributes forces in a balanced way. However, the behavioral characteristics of hollow modular concrete block reinforced foundations are not yet fully understood. In this study, a bearing capacity test is performed to analyze the reinforcement effectiveness of the hollow modular concrete block through the laboratory model tests. From the load-settlement curve, punching shear failure occurs under the unfilled sand condition (A-1-N). However, the filled sand condition (A-1-F) shows a linear curve without yielding, confirming the reinforcement effect is three times higher than that of unreinforced ground. The bearing capacity equation is proposed for the parts that have contact pressure under concrete, vertical stress of hollow blocks, and the inner skin friction force from horizontal stress by confining effect based on the schematic diagram of confining effect inside a hollow modular concrete block. As a result of calculating the bearing capacity, the percentage of load distribution for contact force on the area of concrete is about 65%, vertical force on the area of hollow is 16.5% and inner skin friction force of area of the inner wall is about 18.5%. When the surcharge load is applied to the concrete part, the vertical stress occurs on the area of the hollow part by confining effect first. Then, in the filled sand in the hollow where the horizontal direction is constrained, the inner skin friction force occurs by the horizontal stress on the inner wall of the hollow modular concrete block. The inner skin friction force suppresses the punching of the concrete part and reduces contact pressure.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.1
• /
• pp.53-67
• /
• 2022

This study started from recognizing the need to study place identity from the perspective of residents experiencing the place in daily life. The subject area of the study, Shin-Cheorwon, Galmal-eup, Cheorwon-gun, Gangwon-do area, had a low population until the division of Korea in 1945. Since then, the residents have created the milieu under Shin-Cheorwon's regional historic and cultural context. Thus, the study on this area can show the formation of the interrelationship of the region and residents. The purpose of this study is to understand the meaning and identity of the everyday places of Shin-Cheorwon. Photovoice was chosen as the method for successful Participatory Research; Participant's active intervention stage, 'Documentation (4th step)', Narration (5th step), researcher's analysis stage 'Ideation (6th step)' were specifically used. As a result, the following characteristic of the places chosen by participants could be found: the meaning and relationship with the residents, similarities, and differences in people shown based on their age, length of residence, etc. Through this, participants recollected the past places, found the meaning of the place of the present, and deduced the placeness that Shin-Cheorwon should have in the future. The study identified the place identity that holds the perspective of the residents in their daily life and provides implications on the follow-up studies of place identity. In addition, it is expected that it will apply to urban planning and spatial design in further studies of how residents perceive the space formed by urban development using photovoice methodology.

• Journal of Service Research and Studies
• /
• v.13 no.1
• /
• pp.48-62
• /
• 2023

As seen in the recent K-pop craze, the size and influence of the Korean music industry is growing even bigger. At least 6,000 songs are released a year in the Korean music market, but not many can be said to have been successful. Many studies and attempts are being made to identify the factors that make the hit music. Commercial factors such as media exposure and promotion as well as the quality of music play an important role in the commercial success of music. Recently, there have been many marketing campaigns using Internet memes in the pop music industry, and Internet memes are activities or trends that spread in various forms, such as images and videos, as cultural units that spread among people. Depending on the Internet environment and the characteristics of digital communication, contents are expanded and reproduced in the form of various memes, which causes a greater response to consumers. Previously, the phenomenon of Internet memes has occurred naturally, but artists who are aware of the marketing effects have recently used it as an element of marketing. In this paper, the mediated effect of Internet memes in relation to the success factors of popular music was analyzed, and a prediction model reflecting them was proposed. As a result of the analysis, the factors with the mediated effect of 'cover effect' and 'challenge effect' were the same. Among the internal success factors, there were mediated effects in "Singer Recognition," the genres of "POP, Dance, Ballad, Trot and Electronica," and among the external success factors, mediated effects in "Planning Company Capacity," "The Number of Music Broadcasting Programs," and "The Number of News Articles." Predictive models reflecting cover effects and challenge effects showed F1-score at 0.6889 and 0.7692, respectively. This study is meaningful in that it has collected and analyzed actual chart data and presented commercial directions that can be used in practice, and found that there are many success factors of popular music and the mediating effects of Internet memes.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.80-98
• /
• 2023

In the late Joseon Dynasty, when the bride would ride a palanquin when she went to live with her in-laws, it was a custom to cover the palanquin with tiger skin to ward off misfortunes that may come her way. The higher classes used tiger skin or leopard skin for this purpose, but the common people had to substitute this expensive item with a tiger pattern painted on a blanket. Such blankets were called hotanja, hogu, hoguyok and the like. The term "hotanja" is a pure Korean word. It is not known when the cover for the bridal palanquin was first used, but it was popular from the end of the 19^th century and then gradually disappeared. This is due to the introduction of new Western style weddings that eliminated the need for a bridal palanquin. The tiger print blanket was used not only to cover the bride's palanquin but also to cover a table or floor during the wedding ceremony. This study ran a material analysis on nine pieces of tiger print blankets. All of the blanket artifacts examined in this study had an outer cover and a lining made of fabric that used cotton thread for the warp and wool thread for the weft. Two kinds of wool were found in the weft thread in the outer covers: fat-tailed sheep hair from China and goat hair for carpets from the Hebei province, China. Records show that "blankets with painted tiger patterns" were imported from Russia, and the imported blankets were from Russia and China. The outer cover can be categorized into six types, and the lining into three types depending on the weave and direction of the thread twist. The hem facing can be divided into four types. The lining and outer cover use the full width of the fabric, which was woven in wide widths of 135 cm or wider. The tiger pattern on the blanket was made by stenciling. The stencil design of the body and tail of the tiger were placed on a red blanket to be painted in white, and then the background color of the tiger, which is yellow, would be painted over the white, and then black stripes would be added. The pattern of the tiger varies, which shows that the blankets were made by various craftspeople. The pattern of the tiger print blanket is usually of a tiger lying down, but there were tiger print blankets with a tiger standing up. The pattern of the tiger grew smaller over time, and flower patterns were added in the background. Decorative elements were gradually added to the tiger print blanket patterns, but its function as a palanquin cover became lost. By taking the features of tiger print blankets into consideration, it can be assumed that there are imported pieces among the remaining pieces, and were produced in various places because it was popular at that time.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.3
• /
• pp.157-172
• /
• 2023

The recent Fourth Industrial Revolution is accelerating changes due to digital transformation. According to this trend, the existing start-up paradigm is changing, and new business models based on new technologies and creative ideas are emerging. In addition, the diversity of mentoring relationships and environments such as online mentoring, reverse mentoring, group mentoring, and multiple mentoring is also increasing. However, most mentors in their 50s and 60s, who are mainly active in the start-up field, have been able to help mentees a lot based on their own experience and expertise, but they are having difficulty responding to the changing environment due to a lack of understanding and experience of new technologies and environments. To cope with these changes well, mentors must constantly study, acquire and apply the latest technologies to improve their understanding of new technologies and the environment. In addition, it is necessary to have an understanding and respect for the diversity of mentoring relationships and environments, and to maximize the effectiveness of mentoring by actively utilizing them. Therefore, mentors should recognize that they directly affect the growth and development of mentees, constantly acquire new knowledge and skills to maintain and develop expertise, and actively deliver their knowledge and experiences to mentees. Therefore, in this study, was tried to empirically analyze the relationship between mentoring's influence on mentor's job satisfaction through mentor's personal learning and self-efficacy. The results of the empirical analysis were as follows. Among the functions of mentoring, career function and role modeling were found to have a positive effect on both personal learning and self-efficacy, which are parameters, and job satisfaction, which is a dependent variable. On the other hand, psychological and social functions have a positive effect on personal learning, but they do not have an effect on self-efficacy and job satisfaction. In addition, as a result of analyzing the mediating effect, all mediating effects were confirmed for career functions, and only the mediating effect of self-efficacy was confirmed for role modeling. Through this study, mentoring is an important factor in promoting job satisfaction, personal learning and self-efficacy, and this study can be said to be academically and practically meaningful in that it confirmed personal learning and self-efficacy as factors that increase mentor's job satisfaction, and the focus of mentoring research was shifted from mentee to mentor to study the impact of mentoring on mentors.