• 척추신경추나의학회지
• /
• 제10권1호
• /
• pp.47-61
• /
• 2015

Objectives : The purpose of this study is body parameters characteristics through posture analysis system of musculoskeletal problem patient Methods : Posture analysis system were performed for 164 patients to measure body parameters such as Q-angle, body inclination, neck inclination, PCMT(posterior cervical muscle tension), Knee flexion and posture balance. Statistical analysis using statistical analysis techniques and Pearson correlation coefficients was performed to assess the body parameters obtained by posture analysis system. Results : More than half of people out of 164 reported low back pain, 34.8% of the total was found to have neck pain. There was not a significant difference between genders from the characteristics of gender based body parameters expect for the statistical difference in Q angle, PCMT. There was a significant correlation between low back pain and multiple response status. There was a significant correlations between knee pain and Q angle. Also There was a significant correlations between pelvic pain and posture balance of ankle. Conclusions : Posture analysis system can be used to perform the analysis in place of X-ray measuring body posture and clinical parameters. The results of this study are expected to be the basis for further research on the clinical application of posture analysis system.

• 한국실내디자인학회논문집
• /
• 제17권3호
• /
• pp.131-138
• /
• 2008

This research is on a seating posture happening at a chair in a cinema and looked into various changes in a posture through the analysis of bodily movement in a established space like a cinema. Through the behavioral analysis of a seating posture in a limited space, each behavioral characteristic shown by a male and female and interdependent relations with a limited space were grasped. The conclusion through the above research work was as follows: 1) This research suggested a frame of analysis by dividing a seating posture into the side and upper part and was able to analyze its subsequent change characteristic of a seating posture by a male and female. 2) As for the side posture, a male was found to change fewer postures than a female, but as for the upper posture, there appeared a high frequency in posture change in case of a female. 3) As for time of staying in the side posture, a female was found to keep up a specific posture, and relatively a male changes his postures frequently while appreciating a movie; likely, as for the upper posture, it was found out that there existed a difference between the preference for the upper posture and time to keep it up. 4) A male and female were establishing a comfortable environment through their change in a posture, and there appeared changes in a posture the most within every 10 minutes in both the side and upper part postures. 5) As for the correlation between a initial posture and keep-up posture, it was found that a male tend to pursue a comfortable posture as time goes by, while a female kept up a comfortable one from her initial seating posture.

• 한방재활의학과학회지
• /
• 제30권2호
• /
• pp.125-137
• /
• 2020

Objectives The purpose of this study was to examine how changes in the cervical spine correlate with body posture changes in the whole body, and to find out the significance of complementary clinical application X-ray and Chuna posture analysis. Methods From January 1, 2019 to October 31, 2019, the results of 27 patients with pain in the vertebral region were analysed in accordance with the results of cervical X-ray and Chuna posture analysis. In order to confirm the significance of Chuna posture analysis results, the survey of 187 Chuna standard curriculum instruction qualification certifiers was conducted and the responses of 47 of them were analyzed. Results The occiput-atlas cline angle increases in both hypolordosis/hyperlordosis groups based on cervical lordosis angle, and increases further than in the hyperlordosis group. There were significant correlations between the changes in the cervical spine and the body posture changes in the whole body. There were no significant differences between cervical X-ray sagittal parameters and the body posture analysis parameters based on the patient's major disease codes. Conclusions As a result of conducting a survey on the clinical importance of the body posture analysis parameters, the importance of cervical parameters was verified. Changes in the cervical spine may not only cause other changes in the cervical region, but also affect the body posture changes in the whole body. The complementary application of X-ray and Chuna posture analysis results is helpful in clinical diagnosis and treatment of musculoskeletal disorders.

• 대한물리치료과학회지
• /
• 제7권2호
• /
• pp.459-474
• /
• 2000

The purpose of this study is to identify the posture correction program as the development of the posture maintenance performance, and search for the more efficient posture correction program. The data analysis was processed by SPSS. The data was analysed with $x^2$-test, t-test, pearson product moment correlation, and stepwise regression analysis. The finding of this study is as follows: There are the homogeneity between two groups was verified on the know ledges CF=.697, df=2, P>.05), self-efficacy(F=.098, df=2, P>.05) about the posture. The developed posture correction program has proved to enhance the posture maintenance performance(knowledge t=1.60, P<.05 ; posture manintenance t=7.69, P<.01). The type of posture correction program showed some significant differences (t=5.62, P<.01) in the accuracy of movement way among the factors of the posture maintenance performance. The posture maintenance performance affected self-efficacy. Therefore, the major conclusion is as follows: The posture correction program was meaningfully effective on developing the posture maintenance, and with practice created accuracy much more on the posture maintenance movement way. The development of the posture maintenance performance affected the increase of self-efficacy about the posture. The self-efficacy has proved so powerful factor to influence on the posture maintenance performance development. So, the posture correction program should be done systematically and continually, and developing the posture maintenance performance should be done with practice. After the education, it should be reinforced through practice, midterm identification and reeducation and motivated with recognizing the accurate posture measurement. And it should be created the correction program to develop the high self-efficacy about the posture. It needs the strategy to educate the correct posture individually, and to spread to the society for healthy life style.

• 대한정형도수물리치료학회지
• /
• 제19권2호
• /
• pp.1-9
• /
• 2013

Background: The purpose of this study is to analysis of correlation upper body according to forward head posture. Methods: The subjects of this study were 40 female university students who were equally and randomly allocated to a forward head posture group, normal group. Using general posture system, electromyograph, visual analogue scale, tape measurement, neck disability index were evaluated. Results: There was positive correlation between posture analysis and Sternocleidomastoid, neck flexion (p<.05). There was positive correlation between Craniovertebral angle (CVA) and trapezius upper, VAS (p<.05). There was negative correlation between posture analysis and CVA (p<.05). There was negative correlation between Cranial rotation angle and CVA (p<.05). Conclusion: Increased forward head posture lead to increase of pain, muscles activity, so it suggests to be necessary on the prevention of dysfunction and limited activities daily living.

• 한국안전학회지
• /
• 제18권2호
• /
• pp.119-124
• /
• 2003

Despite rapid technological advance and increased automation facilities, many jobs and activities in our living require manual materials handling(MMH). These include wide variety of activities such as moving things, lifting bags. boxes or cartons, etc. Many studies found that handle could affect on maximum acceptable weight of lifting, but there were few studies f3r the effects of work posture and coupling in lifting tote box. This study performed that ten male college students were required to lift a tote box with and without handle for three postures (bending, straight, right angle posture). From the experiment, following results were obtained. (1) MVC reduced maximum 23% by type of handle. (2) MVC was highest in straight posture, but was lowest in right angle posture. (3) As a result of ANOVA, MVC paid attention to posture and coupling. (p<0.01) (4) To all handle types, biceps brachii activity was increased in right angle posture. but reduced in straight posture. (5) To all posture, biceps brachii activity was most lively in no handle. The results of MVC measurement, subjective rating, EMG analysis, statistic analysis showed that maximum acceptable weight of lifting was influenced by type of handle and straight posture was more comfortable than other postures. Based on these results, it was concluded that acceptable weight of lifting has to differ for work posture and coupling.

• 한국운동역학회지
• /
• 제15권2호
• /
• pp.167-183
• /
• 2005

The purpose of this study was to analyze the kinetical variables of the lower extremity joints when performing uchimata(inner thigh reaping throw) by uke(receiver)'s two posture(shizenhon tai), jigohon tai), by voluntary resistance level(VRL) in judo. The subjects, who were for 3 male Korean national representative judokas(elite group : EG) and 3 male representative judokas of Korean University(non-elite group: NEG), and were filmed 4 DV video cameras(60fields/sec.), that posture of uke were shizenhon-tai (straight natural posture), jigohon-tai(straight defensive posture), VRL of uke was 0%. The selected trials were subject to 3-dimensional film motion analysis and ground reaction force(MRF) analysis. The kinetical variable of this study were temporal, postures( ankle and knee angle of attacking leg), that were computed through video film analysis, MRF at events were obtained from the ground-reaction force analysis by AMTI force plate system. When performing uchi-mata according to each posture and by VRL, from the data analysis and discussion, the conclusions were as follows : 1) Temporal variables : total time-required(TR) when performing uchi-mata was shown EG 0.13sec the shorter than NEG(o.77sec.) in shizenhon-tai. and EG 0.17sec the shorter than NEG(o.76sec.) in jigonhon-tai. Also, all of two groups' jigohon-tai(0.68sec.) were faster than shizenhon-tai(0.71 sec.). 2) The posture variables : The angle of ankle in attacking when performing were plantar flexion in EG, and dorsi flexion in NEG by shizenhon-tai and jigohon-tai posture. The angle of knee in attacking when performing were extension in EG and NEG, but range of extension in EG were larger than in NEG. 3) MRF : Vertical MRF when performing uchi-mata was shown the strongest in the 2nd stage of kake phase(2.23BW) by EG in both posture, and it was same value by NEG(2.23BW), but shizenhon-tai (2.28BW), jigohon-tai(1.64BW), respectively.

• 한국임상보건과학회지
• /
• 제5권4호
• /
• pp.991-997
• /
• 2017

Purpose. The purpose of this study was to muscle properties analysis of SCM(sternocleidomastoid) Muscle according to posture type when using smartphone. Methods. This study was conducted on 73 college students who are using smartphone. Subjects were analyzed myotonPRO to confirm, prone posture group, stand posture group, drop head above $45^{\circ}$in sit posture on a chair group and drop head below $45^{\circ}$in sit posture on a chair group were measured SCM muscle. The myotonPRO were measured one measurer, total 3 times. Comparative analysis of the each groups were investigated of SCM muscle properties. Results. We found that Frequency, Stiffness, Creep and Relaxation were appeared difference in each posture. F index was increased at drop head below $45^{\circ}$group than stand posture group. S index was increased at drop head above $45^{\circ}$group than prone posture group. C index was decreased at drop head below $45^{\circ}$group and drop head above $45^{\circ}$group than prone posture group. R index was decreased at drop head above $45^{\circ}$group than prone posture group. Conclusions. The muscle properties were appeared difference in each posture of SCM muscle using smartphone.

• 한국치위생학회지
• /
• 제18권3호
• /
• pp.269-280
• /
• 2018

Objectives: The purpose of this study was to investigate the change in the posture of dental hygiene students and clinical dental hygienists when implementing dental scaling before and after posture correction training using the rapid upper limb assessment (RULA) method and 3D motion analysis. Methods: Thirty-two healthy volunteers performed dental scaling to remove artificial calculus on dental manikin. The movement and angle of the joints were verified by RULA and 3D motion analysis during the procedure. The subjects were also photographed for 1 minute during the procedure for 10 minutes while the calculus was removed. After the removal of the calculus, the subject and the instructor checked the video together. Posture correction training was conducted by the instructor so that the subject could perform the calculus removal operation in the correct posture. Artificial calculus of the adjacent teeth was then removed for the same period of time, and the change in posture was reviewed. Results: The total score of the posture change using RULA was $5.72{\pm}0.58$ before training and $4.31{\pm}0.10$ after training, showing a significant decrease after training (p<0.001), and upper arm, lower arm, wrist position, neck and waist position showed significant decrease after training. The three-dimensional motion analysis showed significant differences according to the criteria measured at all measurement sites except the left shoulder (p<0.05) Conclusions: It was confirmed through RULA and 3D motion analysis that postural correction training using calculus removal images was effective, and that correct postural education is essential to preventing musculoskeletal diseases caused by removal of calculus.

• 한국의류산업학회지
• /
• 제26권1호
• /
• pp.35-43
• /
• 2024

This study aimed to objectively classify the lateral torso posture types and functions of older women. We used 3D body scan data of 119 women aged 70-85 years from the 6th SizeKorea project. First, we defined three torso axes to represent the lateral torso posture types: posterior waist-back, back-cervical, and whole torso axes. Next, we asked experts to select one of four lateral torso posture types-stooped, straight, leaning back, and swayback postures-by looking at the lateral photographic data of 119 older women. To identify the axis that best represented each lateral torso posture type, a discriminant analysis was conducted using the angle of each of the three torso axes as an independent variable and an expert's visual classification as a dependent variable. Based on the analysis, the whole torso and backcervical axis angles were selected as variables for judging lateral torso posture types. Subsequently, we developed a classification function to determine which of the four lateral torso posture types of a particular participant was applicable for a new individual. The method developed in this study is significant in that it enables the objective classification of the lateral torso postures types of older women.