• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2B
• /
• pp.121-135
• /
• 2010

This study is to assess the effect of potential future climate change on the inflow of agricultural reservoir and its impact to downstream streamflow by reservoir operation for paddy irrigation water supply using the SLURP. Before the future analysis, the SLURP model was calibrated using the 6 years daily streamflow records (1998-200398 and validated using 3 years streamflow data (2004-200698 for a 366.5 $km^2$ watershed including two agricultural reservoirs (Geumgwang8 and Gosam98located in Anseongcheon watershed. The calibration and validation results showed that the model was able to simulate the daily streamflow well considering the reservoir operation for paddy irrigation and flood discharge, with a coefficient of determination and Nash-Sutcliffe efficiency ranging from s 7 to s 9 and 0.5 to s 8 respectively. Then, the future potential climate change impact was assessed using the future wthe fu data was downscaled by nge impFactor method throuih bias-correction, the future land uses wtre predicted by modified CA-Markov technique, and the future ve potentiacovfu information was predicted and considered by the linear regression bpowten mecthly NDVI from NOAA AVHRR ima ps and mecthly mean temperature. The future (2020s, 2050s and 2e 0s) reservoir inflow, the temporal changes of reservoir storaimpand its impact to downstream streamflow watershed wtre analyzed for the A2 and B2 climate change scenarios based on a base year (2005). At an annual temporal scale, the reservoir inflow and storaimpchange oue, anagricultural reservoir wtre projected to big decrease innautumnnunder all possiblmpcombinations of conditions. The future streamflow, soossmoosture and grounwater recharge decreased slightly, whtre as the evapotransporation was projected to increase largely for all possiblmpcombinations of the conditions. At last, this study was analysed contribution of weather, vegetation and land use change to assess which factor biggest impact on agricultural reservoir and stream watershed. As a result, weather change biggest impact on agricultural reservoir inflow, storage, streamflow, evapotranspiration, soil moisture and groundwater recharge.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.3
• /
• pp.153-165
• /
• 2023

The purpose of this study is to propose effective scenarios for green areas in apartment complexes that can improve the connection between green spaces considering wind flow, thermal comfort, and mitigation of the urban heat island effect. The study site was an apartment complex in Godeok-dong, Gangdong-gu, Seoul, Korea. The site selection was based on comparing temperatures and discomfort index data collected from June to August 2020. Initially, the thermal and wind environment of the current site was analyzed. Based on the findings, three scenarios were proposed, taking into account both green patches and corridor elements: Scenario 1 (green patch), Scenario 2 (green corridor), and Scenario 3 (green patch & corridor). Subsequently, each scenario's wind speed, wind flow, and thermal comfort were analyzed using ENVI-met to compare their effectiveness in mitigating the urban heat island effect. The study results demonstrated that green patches contributed to increased wind speed and improved wind flow, leading to a reduction of 31..20% in the predicted mean vote (PMV) and 68.59% in the predicted percentage of dissatisfied (PET). On the other hand, green corridors facilitated the connection of wind paths and further increased wind speed compared to green patches. They proved to be more effective than green patches in mitigating the urban heat island, resulting in a reduction of 92.47% in PMV and 90.14% in PET. The combination of green patches and green corridors demonstrated the greatest increase in wind speed and strong connectivity within the apartment complex, resulting in a reduction of 95.75% in PMV and 95.35% in PET. However, patches in narrow areas were found to be more effective in improving thermal comfort than green corridors. Therefore, to effectively mitigate the urban heat island effect, enhancing green areas by incorporating green corridors in conjunction with green patches is recommended. This study can serve as fundamental data for planning green areas to mitigate future urban heat island effects in apartment complexes. Additionally, it can be considered a method to improve urban resilience in response to the challenges posed by the urban heat island effect.

• Exercise Science
• /
• v.21 no.2
• /
• pp.231-242
• /
• 2012

The purpose of this study was to develop the prediction model of VO₂max using submaximal metabolic responses from the Bruce protocol, HR responses at several stages and 1,200 m running record, and to compare and analyse the validity of these prediction models. The subjects were consisted of 255 male(133 male for 1,200 m running). They were participated maximal exercise testing with Bruce protocol, and the metabolic responses were measured in the end of the first(3 minute), second stage(6 minute), and 1,200 m running record. Measurement items were VO₂(㎖/kg/min), VCO₂(㎖/kg/min), VE(L/min), HR(bpm) of 3 and 6 minute, time to HR 150 bpm and 170 bpm, HR difference between Bruce protocol 6 and 3 minute, 1,200 m running record. Analyzing with all variables using enter method, the multiple R of total variable model was 0.642(p<.01), SEE was 4.38 ㎖/kg/min, CV was 10.8 %, but multicolinearity was appeared. The multiple R of 3 minutes model 1 and model 2 were 0.341 and 0.461, SEE was 6.05 and 5.72 ㎖/kg/min, CV was 14.9 and 14.1%, and multicolinearity did not appeared. The multiple R of 6 minutes model 1 and model 2 were 0.350 and 0.456, SEE was 6.03 and 5.74 ㎖/kg/min, CV was 14.9 and 14.2%, and multicolinearity did not appeared. The R of HR 170 and HR 170 model were 0.151 and 0.154, SEE were 6.36~6.37 ㎖/kg/min, CV were 15.7%. The R of 1,200 m running model was 0.444, SEE was 4.82 ㎖/kg/min, CV were 11.9%. In conclusion, with considering usefulness and convenience through the validity of these prediction models, the prediction model of VO₂max recommended 6 and 3 minute model, and the validity of HR model and 1,200 m running model were moderately low.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.5
• /
• pp.263-271
• /
• 2019

The recent phenomenon of job "Miss Match", which is inconsistent with knowledge in the demand of educational training institutes and industries, has spread to an increase in private education costs for reeducation and employment of new hires, resulting in weak individual job competency and poor employment capability, as well as economic and material waste at the national level. To compensate for these problems, the National Competency Standards(NCS), which are available immediately in practice and look for a standard point of national job competency with the aim of fostering human resources sought by industries, were developed, and even the NCS-based qualification system was launched in line with the stream of times. This study is intended to look into the importance and priority of competency units and competency unit elements at the NCS-based qualification L3 level in the skin care field for an overall check of the NCS-based qualification level at a time when educational institutes are organizing and operating the school curriculums according to the NCS and NCS-based qualification level. And it is attempted to provide basic data for the development of curriculum in fostering professional human resources required by industries. To analyze the needs for competency units and competency unit elements at the L3 level, a survey using AHP method was carried out to a group of field experts and a group of education experts. In addition, the SPSS(Statistical Package for Social Science) ver. 21.0 and Expert Choice 2000, an AHP-only solution was used to do statistical processing through the processes of data coding and data cleaning. The findings showed that there was a partial difference of opinion between a group of field experts and a group of education experts. This indicates that the inconsistencies between educational training institutes and industrial sites should be resolved at this time of change with the aim of fostering field customized human resources with professional skills. Consequently, the solution is to combine jobs at industrial sites and standardized educations of educational institutes with human resources required at industrial sites.

• Korean Journal of School Psychology
• /
• v.16 no.3
• /
• pp.231-263
• /
• 2019

The purpose of this study was to verify the effects of growth orientation, life satisfaction, perceived stress, positive psychological capital and interpersonal relationships in the group coaching program for the promotion of growth orientation for university students based on the model of the social-cognitive approach to motivation. The program consisted of eight topics: growth orientation, growth mindset and brain plasticity, self-directed goal setting, talent which is a product of ongoing effort, failure attitude and perspective change, positive emotion, thinking and behavior, value of growth orientation and self-coaching, respectively. The program comprised a total of eight sessions, 120 minutes each, and the final program was completed through a preliminary experiment with three university students. In order to verify the effectiveness of the program, 48 university students were divided into 16 in the experimental group, 16 in the comparative group, and 16 in the control group. The experimental group participated in the group coaching program to enhance the growth orientation based on the model of the social-cognitive approach to motivation developed in this study, the comparative group participated in a learning goal orientation improvement program based on an incremental implicit theory, and the control group did not carry out any program. Three groups were tested in pre, post, follow-up1(after 1 month) and follow-up2(after 3 months) in order to growth orientation, life satisfaction, perceived stress, positive psychological capital and interpersonal relationships. We performed analysis to confirm the homogeneity to the data of the three groups and to verify the interaction effects between times and groups. As a result, it was confirmed that the group coaching program to promote growth orientation, life satisfaction, perceived stress, positive psychological capital and interpersonal relationships had statistically significant effect and was more effective than the comparative program due to the larger effective size. Also, we confirmed that the coaching effect was sustained after the program was finished and more effectively maintained than the comparative program. Based on the results of this study, this study has academic implications because it verify the effectiveness of the group coaching for the promotion of the growth orientation by scient ic method.

• Asia Marketing Journal
• /
• v.12 no.3
• /
• pp.43-62
• /
• 2010

The notion of customer orientation is now importantly considered in the context of banking industries. Despite customer-oriented organizational cultures, there are few studies addressing the relationship between customer orientation and its outcomes. In particular, this study aims at testing the effect of customer orientation as a key marketing effort designed by a bank. This is because interest rate sensitivity is critical for evaluating banking services after raising the base rate. In so doing, first, this study investigates the relationships among customer orientation, interest rate sensitivity, and customer loyalty. Second, this paper examines how the moderating effects of both deposit interest and loan interest rates influence the linkages of customer orientation-interest rate sensitivity and customer orientation-customer loyalty. To test the proposed model, research data are collected from 304 subjects who use banking services(e.g., Shin-Han, Kookmin, the First Bank, Hana, and Woori banks). Each construct was measured by published items and the psychometric properties of the three constructs, excluding two constructs of the moderators, were evaluated by employing the method of confirmatory factor analysis via the use of AMOS. The model fit was also evaluated using the CFI, TLI, and RMSEA fit indices that are recommended based on their relative stability and insensitivity to sample size. The findings show that the relationship between customer orientation and customer loyalty is significant, whereas the relationships between customer orientation and interest rate sensitivity and between interest rate sensitivity and customer loyalty are not supported. Although customer orientation is highly evaluated, customers' interest rate sensitivity that results in the comparison of interest rates plays an important role in reducing the effect of customer orientation. As a consequence, interest rate sensitivity does not influence customer loyalty. First of all, one of interesting results in this study is that the moderating effect of loan interest rate is quite different from deposit interest rate. In the case of deposit interest rate, the linkages both customer orientation-interest rate sensitivity and customer orientation-customer loyalty are insignificant. In the case of loan interest rate, however, the two proposed linkages are supported. As our proposed relationships are still in its infancy in the context of banking industry, our study contributes to enhance scholars' knowledge of bank services and provides insights for practitioners when their marketing strategies, particularly both deposit and interest rates, have to be established. Finally, this research also illuminates the need for further research that considers the influence of customer orientation on consumer's decision-making and bank profits. More specifically, the results are encouraging and will lead us to further investigate this key outcome of the banking deposit/interest rates.

• Korean Journal of Culture and Social Issue
• /
• v.23 no.3
• /
• pp.409-449
• /
• 2017

The main purpose of this research is to investigate the qualitative nature of Korean adolescents and their parent's perception of elderly parents care. In addition, this research exams the quantitative differences between the two generations in term of their elderly parents care self-efficacy and attitude towards caring for their elderly parents. Further, an examination of the parental influence upon their children's elderly parents care self-efficacy and attitude towards caring for their elderly parents. There were 2,460 participants in this study, with 820 adolescents, and 820 fathers and 820 mothers. The results of the study were as follows: First, in terms the participants perceptions of "the most difficult aspect of caring for elderly parents", the most representative response for adolescents was financial difficulties, while for parents differences in opinions. When it came to "the best aspect of caring for elderly parents" the most representative response for adolescents was harmonious family, while for parents good for children's upbringing. When it came to "actual acts (behavior) of elderly parents care" the most representative response for adolescents was living together with their elderly parents, while for parents looking after their elderly parents. When it came to "the best method of caring for their elderly parents" the most representative response for both adolescents and parents was providing a peace-of-mind for their elderly parents, followed by the second most frequent response of adolescents living together with their elderly parents, and for parents talking with their elderly parents. When it came to "how one feels when not caring for their elderly parents" the most representative response for both groups was a feeling of indebtedness. Second, for the quantitative analyses of the differences between the two generations, the parents showed a lower level of elderly parents care self-efficacy and a higher level of negative attitude towards caring for their elderly parents, when compared to the adolescents. Third, for the parental influence upon the adolescents' elderly parents care self-efficacy and attitude towards caring for their elderly parents, the only significant influence found was the mothers' elderly parents care self-efficacy.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.2
• /
• pp.57-72
• /
• 2018

In order to extract meaningful information from the excellent farming settlement cases of young farmers published by KNCAF, we studied the key words with text mining and created a word cloud for visualization. First, in the text mining results for the entire sample, the words 'CEO', 'corporate executive', 'think', 'self', 'start', 'mind', and 'effort' are the words with high frequency among the top 50 core words. Their ability to think, judge and push ahead with themselves is a result of showing that they have ability of to be managers or managers. And it is a expression of how they manages to achieve their dream without giving up their dream. The high frequency of words such as "father" and "parent" is due to the high ratio of parents' cooperation and succession. Also 'KNCAF', 'university', 'graduation' and 'study' are the results of their high educational awareness, and 'organic farming' and 'eco-friendly' are the result of the interest in eco-friendly agriculture. In addition, words related to the 6th industry such as 'sales' and 'experience' represent their efforts to revitalize farming and fishing villages. Meanwhile, 'internet', 'blog', 'online', 'SNS', 'ICT', 'composite' and 'smart' were not included in the top 50. However, the fact that these words were extracted without omission shows that young farmers are increasingly interested in the scientificization and high-tech of agriculture and fisheries Next, as a result of grouping the top 50 key words by crop, the words 'facilities' in livestock, vegetables and aquatic crops, the words 'equipment' and 'machine' in food crops were extracted as main words. 'Eco-friendly' and 'organic' appeared in vegetable crops and food crops, and 'organic' appeared in fruit crops. The 'worm' of eco-friendly farming method appeared in the food crops, and the 'certification', which means excellent agricultural and marine products, appeared only in the fishery crops. 'Production', which is related to '6th industry', appeared in all crops, 'processing' and 'distribution' appeared in the fruit crops, and 'experience' appeared in the vegetable crops, food crops and fruit crops. To visualize the extracted words by text mining, we created a word cloud with the entire samples and each crop sample. As a result, we were able to judge the meaning of excellent practices, which are unstructured text, by character size.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.119-126
• /
• 2023

Today, in order to improve fuel efficiency and dynamic behavior of automobiles, an era of light weight and simplification of automobile parts is being formed. In order to simplify and design and manufacture the shape of the product, various components are integrated. For example, in order to commercialize three products into one product, product processing is occurring to a very narrow area. In the case of existing parts, precision die casting or casting production is used for processing convenience, and the multi-piece method requires a lot of processes and reduces the precision and strength of the parts. It is very advantageous to manufacture integrally to simplify the processing air and secure the strength of the parts, but if a deep and narrow pocket part needs to be processed, it cannot be processed with the equipment's own spindle. To solve a problem, research on cutting processing is being actively conducted, and multi-axis composite processing technology not only solves this problem. It has many advantages, such as being able to cut into composite shapes that have been difficult to flexibly cut through various processes with one machine tool so far. However, the reality is that expensive equipment increases manufacturing costs and lacks engineers who can operate the machine. In the five-axis cutting processing machine, when producing products with deep and narrow sections, the cycle time increases in product production due to the indirectness of tools, and many problems occur in processing. Therefore, dedicated machine tools and multi-axis composite machines should be used. Alternatively, an angle spindle may be used as a special tool capable of multi-axis composite machining of five or more axes in a three-axis machining center. Various and continuous studies are needed in areas such as processing vibration absorption, low heat generation and operational stability, excellent dimensional stability, and strength securing by using the angle spindle.

• Journal of Service Research and Studies
• /
• v.13 no.4
• /
• pp.97-112
• /
• 2023

Background: In modern society, the importance of Public Design has become increasingly significant in contributing to the enhancement of urban functionality and the quality of life of citizens. Smart Public Facilities have played a pivotal role in enriching user experience by improving accessibility, convenience, and safety, and in elevating the value of the city. This research recognizes the importance of Public Facilities and explores the potential of Smart Public Facilities in solving urban challenges and progressing towards sustainable and Inclusive cities. Method: The literature review comprehensively examines existing theories and research results on Smart Public Facilities. The case study analyzes actual examples of Smart Public Facilities implemented in cities both domestically and internationally, drawing out effects, user satisfaction, and areas for improvement. Through analysis and discussion, the results of the case studies are evaluated, discussing the potential development of Smart Public Facilities. Results: Smart Public Facilities have been found to bring positive changes in various aspects such as urban management, energy efficiency, safety, and information accessibility. In terms of urban management, they play a crucial role in optimization, social Inclusiveness, environmental protection, fostering citizen participation, and promoting technological innovation. These changes create a new form of urban space, combining physical space and digital technology, enhancing the quality of life in the city. Conclusion: This research explores the implications, current status, and functions of Smart Public Facilities in service and design aspects, and their impact on the urban environment and the lives of citizens. In conclusion, Smart Public Facilities have brought about positive changes in the optimization of urban management, enhancement of energy efficiency, increased information accessibility, User-Centric design, increased interaction, and social Inclusiveness. Technological innovation and the integration of Public Facilities have made cities more efficient and proactive, enabling data-based decision-making and optimized service delivery. Such developments enable the creation of new urban environments through the combination of physical space and digital technology. The advancement of Smart Public Facilities indicates the direction of urban development, where future cities can become more intelligent, proactive, and User-Centric. Therefore, they will play a central role in Public Design and greatly contribute to improving the urban environment and the quality of life of citizens.