• 전기학회논문지P
• /
• 제57권3호
• /
• pp.255-259
• /
• 2008

In this paper, a current-mode integrator for low-voltage, low-power analog integrated circuits is presented. Using the proposed current-mode integrator, the baseband analog filter is designed for WCDMA wireless communication. To verify the proposed current-mode integrator circuit, Hspice simulation using 1.8V TSMC $0.18{\mu}m$ CMOS parameter is performed and achieved 44.9dB gain, 15.7MHz unity gain frequency. The described 3rd-order current-mode baseband analog filter is composed of the proposed current-mode integrator, and SFG(Signal Flow Graph) method is used to realize the baseband filter. The simulated results show 2.12MHz cutoff frequency which is suitable for WCDMA baseband block.

• 한국정보통신학회논문지
• /
• 제25권11호
• /
• pp.1627-1634
• /
• 2021

본 논문은 저전력 뉴럴 네트워크 가속기 SOC를 위한 아날로그 Convolution Filter용 저전력 초소형 ADC 회로 및 칩 설계 기술을 소개한다. 대부분의 딥러닝의 학습과 추론을 할 수 있는 Convolution neural network accelerator는 디지털회로로 구현되고 있다. 이들은 수많은 곱셈기 및 덧셈기를 병렬 구조로 구현하며, 기존의 복잡한 곱셉기와 덧셈기의 디지털 구현 방식은 높은 전력소모와 큰 면적을 요구하는 문제점을 가지고 있다. 이 한계점을 극복하고자 본 연구는 디지털 Convolution filter circuit을 Analog multiplier와 Accumulator, ADC로 구성된 Analog Convolution Filter로 대체한다. 본 논문에서는 최소의 칩면적와 전력소모로 Analog Accumulator의 아날로그 결과 신호를 디지털 Feature 데이터로 변환하는 8-bit SAR ADC를 제안한다. 제안하는 ADC는 Capacitor Array의 모든 Capacitor branch에 Split capacitor를 삽입하여 모든 branch의 Capacitor 크기가 균등하게 Unit capacitor가 되도록 설계하여 칩면적을 최소화 한다. 또한 초소형 unit capacitor의 Voltage-dependent capacitance variation 문제점을 제거하기 Flipped Dual-Capacitor 회로를 제안한다. 제안하는 ADC를 TSMC CMOS 65nm 공정을 이용하여 설계하였으며, 전체 chip size는 1355.7㎛², Power consumption은 2.6㎼, SNDR은 44.19dB, ENOB는 7.04bit의 성능을 달성하였다.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1254-1259
• /
• 2008

A new CMOS current-mode integrator for low-voltage analog integrated circuit design is presented. The proposed current-mode integrator is based on cross-coupled gain-boosting topology. When it is compared with that of the typical current-mirror type current-mode integrator, the proposed current-mode integrator achieves high current gain and unity gain frequency with the same transistor size. As a application circuit of the proposed integrator, we designed the 1.8V 200MHz band current-mode lowpass filter. These are verified by Hspice simulation using $0.18{\mu}m$ CMOS technology.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.32-41
• /
• 1996

We propose the improved GMSK (gaussian-filtered minimum shift keying) quadrature modulator using the FIR(finite impulse response )filter whose coefficients are obtained form the differnce of phase response, and design its ASIC (applicaton specific integrated circuit) which can be used for GSM (global system for mobile communication) digital cellular system and DCS 1800 (digital cellular system at 1800MHz) personal communication system. Input data become quantized I and Q channel 10 bit signal through cosine and sine ROM mapping after being filtered by the FIR filter whose normalized bandwidth is 0.3 and designed by considering intersymbol interference as well as sampling ratio. These two signals become the GMSK modulated I and Q channel signal through DAC (digital-to-analog converter) and 7th order analog chebyshev LPF(low pass filter) respectively. The difference between the ideal analog signal and its digitized signal is analyzed in terms of sampling noise, quantization noise, truncation noise and coefficient noise. And the effect of the LPF following the DAC is considered. The ASIC design of the GMSK quadrature modulator is also confirmed by an experiment.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권4호
• /
• pp.309-317
• /
• 2011

This paper describes a baseband analog (BBA) chain for wireless local area network (WLAN) applications. For the given specifications of the receiver BBA chain, the optimum allocation of the gain and filter rejection of each block in a BBA chain is achieved to maximize the SFDR. The fully integrated BBA chain is fabricated in 0.13 ${\mu}m$ CMOS technology. An input-referred third-order intercept point (IIP3) of 22.9 dBm at a gain of 0.5 dB and an input-referred noise voltage (IRN) of 32.2 nV/${\surd}$Hz at a gain of 63.3 dB are obtained. By optimizing the allocation of the gain and filter rejection using the proposed design methodology, an excellent SFDR performance of 63.9 dB is achieved with a power consumption of 12 mW.

• 전자공학회논문지A
• /
• 제33A권3호
• /
• pp.135-139
• /
• 1996

It is difficult to fabricate precise resistors for the analog integrated circuits using MOS technology. Until now polysilicon resistors were used at the analog integrated circuits, but some deviations of resistance and sensitive variation processes still cause their misactions. In order to improve these misactions, we suggest a CMOS resistor cell which provides precise resistance and excellant linearity. Also we designed the second order active low pass filter using the CMOS resistor cells and verified their superior performances compared to the actual resistors.

• Journal of Semiconductor Engineering
• /
• 제1권2호
• /
• pp.64-73
• /
• 2020

As CMOS technology scales down, the design of analog signal processing circuit becomes far more difficult because of steadily decreasing supply voltage and smaller intrinsic gain of transistors. With sub-1V supply voltage, the conventional analog signal processing relying on high-gain amplifiers is not an effective solution and different approach has to be sought. One of the promising approaches is "time-domain analog signal processing" which exploits the improving switching speed of transistors in a scaled CMOS technology. In this paper, various time-domain analog signal processing techniques are explained with some experimental results.

• 한국정보처리학회논문지
• /
• 제4권8호
• /
• pp.2120-2132
• /
• 1997

아날로그 집적회로 설계 자동화를 위한 레이아웃 자동화 도구를 제안하였다. 구현된 시스템은 완전 주문형 방식을 채택하고 아날로그 레이아웃의 제약 조건을 고려하였다. 기존의 아날로그 레이아웃 자동화 도구들이 가지고 있는 단점을 보완하기 위하여 변수화된 모듈 라이브러리를 개발, 복잡한 아날로그 모듈들의 레이아웃을 지원하여 확장성을 극대화하였다. 또한 배선 과정에는 기존의 디크스트라 알고리즘을 개선한 종적 다중 경로 알고리즘을 적용하였다. 구현된 아날로그 레이아웃 자동화 도구는 비교기, 연산증폭기 그리고 필터등의 시험회로를 대상으로 시험 수행하였다. 기존의 자동화 도구인 OPASYN과 비교하여 웰 합병과 인터디지트형의 모듈로 레이아웃이 수행된 결과를 얻을 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.301-304
• /
• 2001

The analog multiplier is very useful building block in many circuits such as filter, frequency-shifter, and modulators. In recent year, The main design issue of circuit designer is low-voltage/low-power system design, because of all systems are recommended very integrated system and portable system In this paper, the proposed the four-quadrant analog multiplier is using the bulk-driven techniques. The bulk-driven technique is very useful technique in low-voltage system, compare with gate-driven technique. therefore the proposed analog multiplier is operated in 1V supply voltage. And the proposed analog multiplier is low power dissipation compare with the others. therefor the proposed analog multiplier is convenient in low-voltage/low-power in system.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권3호
• /
• pp.168-173
• /
• 2004

A low power CMOS receiver baseband analog circuit based on alternating filter and gain stage is reported. For the given specifications of the baseband analog block, optimum allocation of the gain, IIP3 and NF of the each block was performed to minimize current consumption. The fully integrated receiver BBA chain is fabricated in $0.18\;{\mu}m$ CMOS technology and IIP3 of 30 dBm with a gain of 55 dB and noise figure of 31 dB are obtained at 4.86 mW power consumption.