• 센서학회지
• /
• 제7권1호
• /
• pp.17-22
• /
• 1998

$4{\mu}m$ 두께의 a-Se 광도전막을 이용한 HARP (high-gain avalanche rushing amorphous photoconductor) 촬상관을 제작하고 그 특성을 조사하였다. 타겟전압이 360 V 이상으로 증가함에 따라 촬상관의 신호전류는 급격하게 증가하였으나 암전류는 490 V의 전압까지 3.2 nA이하로 억제되었다. $1.1{\times}10^{6}V/cm$의 전기장에서 440 nm의 파장에 대한 타겟의 양자효율은 약 4.3으로 나타났다. 또한 촬상관의 진폭응답은 800 TV line에서 7.5 %였으며 잔상은 3.4%였다.

• Journal of Welding and Joining
• /
• 제12권3호
• /
• pp.109-117
• /
• 1994

Spot welding has wide used with a high work efficiency in the automotive and aerospace industries. Up to the present, the technique mainly used to test spot welds on production lines has been entirely depended upon destructive chisel or peel testing. Therefore, it's being very important assignment to secure the NDE technique which can be evaluate spot weld quality with more efficiency and high reliability. This paper discusses the feasibility of UNDE techniques to evaluate spot weld quality. For the sake of the approach to the quantitative measurement of nugget diameter and the discrimination of a the corona bond from nugget, ultrasonic c-scan image and distribution of reflective echo amplitude was measured by immersion method with the mechanical and the electronic scanning of point-focussed ultrasonic beam(25 MHz). As the results of this study, corona bond which is the most dangerous types of interface defects can be successfully detected, as well as expulsion and voids. Ultrasonic testing results were confirmed and compared by optical microscope and SAM(Scanning Acoustic Microscope) observation of the spot-weld cross section. The results show that the nugget diameter can be successfully measured with the accuracy of 0.8 mm.

• 한국전자파학회논문지
• /
• 제11권4호
• /
• pp.565-574
• /
• 2000

본 논문에서는 지하 탐사용 레이다를 이용하여 공사현장에 매설된 파이프 또는 케이블의 위치를 파악하는 법 과 이에 따른 새로운 근사 이미지 추출 방법을 제안하였다. 기본 원리는 매설 구조물에 의해 산란된 광대역펄스 산란신호의 지연시간과 크기 복원에 기초를 두고 있다. 산란신호의 정확한 측정을 위해 레이다 탐색경로에 따른 수신신호의 절대치 적분 방법을 사용하였고, 이로 인해 다양한 지면 상태 하에서도 선명한 이미지 추출이 가능 하였다. 분산과 손실특성을 나타내는 다항 Debye모텔을 사용하여 지하매질을 기술하였고, 모의 실험은 FDTD 방법을 사용하였다. 본 논문에서 제안한 이미지 추출방법은 시간영역에서의 전파 경로추적이라는 새로운 방법을 사용하였고, 이를 이용하여 구조물의 위치를 탐색하였다.

• 한국인쇄학회지
• /
• 제23권2호
• /
• pp.1-14
• /
• 2005

Generally, printing inks are composed of pigment, vehicle and additive. Among others, the vehicle transfers the pigment to substrate and then binds it on the surface. So, rheological properties of the vehicle are an important factor which has influence on printability. Thus, in this study, rheology of the vehicle was investigated by using rotational rheometer according to molecular weight of resin. Also, emlusion rheology of water in oil type and its microstructure were examined with increasing the shear rate. Consequently, the following results were obtained: (1) By viscometric flow test, zero shear viscosity and shear thinning index of vehicle increased with increasing the molecular weight of resin. (2) By relaxation and creep test, relaxation time and retardation time of vehicle increased with increasing the molecular weight of resin. (3) By frequency sweep test, crossover point of vehicle increased with increasing the molecular weight of resin. (4) G' and G" of emlusions increased with increasing the molecular weight by amplitude sweep test. (5) The shape of water drop in emlusions was changed to the capillary tube.

• 한국인터넷방송통신학회논문지
• /
• 제12권1호
• /
• pp.151-156
• /
• 2012

근사분산을 최대화하는 least favorable한 ${\epsilon}$-contaminated 정규분포는, 중간 영역에서는 가우시안이나 그 외의 영역에서는 라플라시안 분포를 갖는다는 사실에 근거하여 본 논문에서는 이 확률분포 하에서 비선형 잡음제거 알고리즘을 유도하고 이의 성능을 확인한다. 제안 알고리즘은 위 잡음 환경에서 MLE(maximum likelihood estimator) 이며, efficacy를 최대화한다는 기준에서 최적임을 증명한다. 또한, 유도한 필터를 미리어드 필터와 결합함으로써 임펄스 잡음을 효과적으로 제거하기 위한 비선형 필터를 제안하고 이를 이론적으로 분석한 다음 ${\alpha}$-stable 확률분포를 갖는 잡음에 열화된 이미지를 이용하여 그 성능을 확인한다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
• /
• pp.69-73
• /
• 2008

본 논문에서는 다중 사용자 시간 도약 펄스 위치 변조(TH-PAM) 초광대역 시스템(UWB System)의 동작을 분석한다. 이상적인 AWGN 채널 환경과 상관 수신기로 TH-PAM과 TH-PPM의 동작을 분석하였다. 두 UWB 시스템의 BER 특성을 나타내는 표준 규칙을 얻기 위하여 전력 스펙트럼 밀도 함수(PSD)를 사용하였으며 시스템 매개 변수들에 실행을 관련시키는 함수를 얻을 수 있었다. 시스템의 Data와 image 전송의 시뮬레이션 결과로 이론적인 분석을 한다.

• Structural Engineering and Mechanics
• /
• 제77권5호
• /
• pp.637-650
• /
• 2021

The paper presents an investigation of the widely varying mechanical performance and behaviour of steel and Glass Fibre Reinforced Polymer (GFRP) reinforced concrete beams using non-destructive techniques of Acoustic Emission (AE) and Digital Image Correlation (DIC) under four-point bending. Laboratory experiments are performed on both differently reinforced concrete beams with 0.33%, 0.52% and 1.11% of tension reinforcement against balanced section. The results show that the ultimate load-carrying capacity increases with an increase in tensile reinforcement in both cases. In addition to that, AE waveform parameters of amplitude and number of AE hits successfully correlates and picks up the divergent mechanism of cracking initiation and progression of failure in steel reinforced and GFRP reinforced concrete beams. AE activity is about 20-30% more in GFRP-RC beams as compared to steel-RC beams. It was primarily due to the lower modulus of elasticity of GFRP bars leading to much larger ductility and deflections as compared to steel-RC beams. Furthermore, AE XY event plots and longitudinal strain profiles using DIC gives an online and real-time visual display of progressive AE activity and strains respectively to efficaciously depict the crack evolution and their advancement in steel-RC and GFRP-RC beams which show a close matching with the micro-and macro-cracks visually observed in the actual beams at various stages of loading.

• 대한방사선치료학회지
• /
• 제27권1호
• /
• pp.73-78
• /
• 2015

목 적 : 본 연구는 위상 기반 방식으로 배열 된 사차원 전산화 단층 촬영 영상(4DCT, 4-dimensional computed tomography)를 이용하여 진폭 기반 방식으로의 재구성 하였을 때의 위상 차이를 분석하였다. 대상 및 방법 : 2015년 02월부터 03월 까지 호흡동조 방사선 치료를 받은 간암 환자 10명의 사차원 전산화 단층 촬영 영상을 대상으로 분석 하였다. RPM respiratory gating (RPM 1.7.5, Varian, USA)장치를 이용하여 위상 기반 배열 방식의 호흡주기별 영상을 획득 하였으며, 획득된 호흡 주기별 영상은 치료계획시스템(Pinnacle 9.2, Philips, USA)을 이용하여 호흡주기별 복부의 움직임 값을 측정하였다. 최대 호기(50%)와 최대 흡기(0%)에서의 복부 움직임을 진폭으로 하여 10개 위상의 진폭 기반 호흡위상을 재구성하고, 이를 위상 기반 사차원영상촬영영상의 호흡 위상과 비교하였다. 결 과 : 위상 기반 및 진폭 기반 사차원단층촬영영상으로 재구성한 영상에서의 위상 차이는 최대 30% 호흡위상에서 확인할 수 있었으며, 30% 호흡 위상에서 평균 0.13 cm (최대 0.24 cm)의 위치 차이를 확인할 수 있었고, 동일 측정 점 위치가 가지는 위상차는 30% 위상에서 평균 8.7%(최대 16.5%)의 위상차를 확인하였다. 전체 호흡 구간에서 평균 위치 차이는 0.4 cm, 평균 위상 차이는 13.0% 임을 확인하였다. 결 론 : 본 연구 결과는 위상 기반 방식으로 배열된 4DCT 영상을 진폭 기반 방식으로의 변환하였을 때 계산 값과 실측값을 분석한 결과 최대 16.5% 의 위상차가 발생함을 확인하였다.

• Imaging Science in Dentistry
• /
• 제50권3호
• /
• pp.227-236
• /
• 2020

Purpose: Image artifacts caused by patient motion cause problems in cone-beam computed tomography (CBCT) because they lead to distortion of the 3-dimensional reconstruction. This prospective study was performed to quantify patient movement during CBCT acquisition and its influence on image quality. Materials and Methods: In total, 412 patients receiving CBCT imaging were equipped with a wireless head sensor system that detected inertial, gyroscopic, and magnetometric movements with 6 dimensions of freedom. The type and amplitude of movements during CBCT acquisition were evaluated and image quality was rated in 7 different anatomical regions of interest. For continuous variables, significance was calculated using the Student t-test. A linear regression model was applied to identify associations of the type and extent of motion with image quality scores. Kappa statistics were used to assess intra- and inter-rater agreement. Chi-square testing was used to analyze the impact of age and sex on head movement. Results: All CBCT images were acquired in a 10-month period. In 24% of the investigations, movement was recorded (acceleration: >0.10 [m/s²]; angular velocity: >0.018 [°/s]). In all examined regions of interest, head motion during CBCT acquisition resulted in significant impairment of image quality (P<0.001). Movement in the horizontal and vertical axes was most relevant for image quality (R²>0.7). Conclusion: Relevant head motions during CBCT imaging were frequently detected, leading to image quality loss and potentially impairing diagnosis and therapy planning. The presented data illustrate the need for digital correction algorithms and hardware to minimize motion artefacts in CBCT imaging.

• 대한핵의학회지
• /
• 제24권2호
• /
• pp.244-253
• /
• 1990

Sixty-four patients with paradoxical ventricular wall motion noticed both in angiocardiography or 2-dimensional echocardiography were assessed by ECG gated blood pool scan (GBPS). Endless cine loop image, phase and amplitude images and paradox image obtained by visual inspection of each cardiac beat or Fourier transformation of acquired raw data were investigated to determine the incremental value of GBPS with these processing methods for identification of paradoxical ventricular wall motion. The results were as follows: 1) Paradoxical wall motions were observed on interventricular septum in 34 cases, left ventricular free wall in 26 and right ventricular wall in 24. Underlying heart diseases were ischemic (23 cases) valvular(9), congenital heart disease (12), cardiomyopathy (5). pericardial effusion(5), post cardiac surgery(3), col pulmonale (2), endocarditis(1) and right ventricular tumor(1). 2) Left ventricular ejection fractions of patients with paradoxical left ventricular wall motion were significantly lower than those with paradoxical septal motion(p<0.005). 3) The sensitivity of each processing methods for detecting paradoxical wall motion was 76.9% by phase analysis, 74.6% by endless cine loop mapping and 68.4% by paradox image manipultion respectively. Paradoxial motions visualized only in phase, paradox or both images were appeared as hypokinesia or akinesia in cine loop image. 4) All events could be identified by at least one of above three processing methods, however only 34 cases (48.4%) showed the paradoxical molies in all of the three images. By these findings, we concluded that simultaneous inspection of all above three processing methods-endless cine loop, phase analysis and paradox image-is necessary for accurate identification and assessment of paradoxical ventricular wall motion when performing GBPS.